Instrukcja obsługi Aluratek AISM01F
Aluratek
Odbiornik Bluetooth
AISM01F
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aluratek AISM01F (1 stron) w kategorii Odbiornik Bluetooth. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
Package Contents Product Highlights Product Application
Operation Operation
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or "warranty void" sticker has
been removed or altered on the product.
This warranty does not cover:
A) Cosmetic damage or damage due to acts of God
B) Accident, misuse, abuse, negligence or modification of any part of the product.
C) Damage due to improper operation or maintenance, connection to improper equipment,
or attempted repair by anyone other than Aluratek.
D) Products sold AS IS or WITH FAULTS.
IN NO EVENT SHALL ALURATEK'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT
FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THE PRODUCT, IT'S ACCOMPANYING SOFTWARE, OR
IT'S DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to it's
products, contents or use of this documentation and all accompanying software, and specifically
disclaims it's quality, performance, merchantability, or fitness for any particular purpose. Aluratek
reserves the right to revise or update it's product, software or documentation without obligation to
notify any individual or entity.
qsg Q10444 Copyright © 2017 Aluratek, Inc. All Rights Reserved.
aluratek.com
model AISM01F
Quick Start Guide
Bluetooth Audio Receiver with Built-in Microphone
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Charging Port Cap
Micro USB
Charging Port
3.5mm
Audio Port
Microphone
Multi Function
Button
Control Functions
Function Operation
Power ON When OFF, press and hold the button multi-function
for 3 seconds until the blue LED flashes
Pairing When OFF, press and hold the multi-function button
for 6 seconds until blue and red LED flashes
Short press multi-function button
Press multi-function button for 1 second
Power OFF
Reject Call
Short press multi-function button twiceRedial Last #
Short press multi-function button
Play / Pause Song
Answer Call, Hang up Call,
Cancel Dialing
When ON, press and hold the multi-function button
for 5 seconds until the red LED flashes
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
USB Charging Cable Registration Card3.5mm Audio Cable
Operation Operation
Operation
Pairing
Please make sure the device supports A2DP profile. The pairing procedure will vary
depending on the actual device. Please refer to the user guide of your device for detail
instruction. The general pairing procedures are as follows:
1. Make sure AISM01F is turned OFF
2. Active AISM01F pairing mode by press and hold the multi-function button for 6-7 seconds.
3. Activate your device’s Bluetooth function and set your device to search for Bluetooth
device. Select AISM01F when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you
are prompted for PIN, please enter “0000”.
5. If prompted by your device to connect, please select “Yes”.
6. After connecting successfully, the blue LED with flash twice every 5 seconds.
Note: Please make sure the audio output of your device is set to Bluetooth for audio streaming.
Radio and TV Interference Statement
LED Indicators
LED Indicator Status
Solid Red LED Charging
Flashing Red and Blue Pairing Mode
Low battery
Connected to a device
LED OFF
Flashing Blue
(Twice every 5 seconds)
Powered on but not connected with a device
Flashing Blue
(Once every 5 Seconds)
Flashing Red
Power OFF / Fully charged if connected to a power source
Charging The Battery
The battery is not fully charged and it is highly recommended that you charge AISM01F
before you begin using it.
Note: Using AISM01F “out of the box” will not harm the device.
You will experience reduced battery life as the unit will not be fully charged. Connect the
larger USB end of the cable provided to your PC or USB power adapter (not included)
and the smaller Micro USB to the charging port of AISM01F. Please charge the battery
for a minimum of (2) hours. When charging is complete, the blue LED will turn on.
Using With Power Connected AISM01F
Here are the steps to follow if you want to use AISM01F with power connected. AISM01F
will stay in standby mode as long the power is connected so your Bluetooth device can
reconnect automatically after you are within range.
1. Make sure AISM01F is turned OFF.
2. Connect the larger USB end of the cable provided to your PC / power adapter / TV’s
USB port and the smaller end to the charging port of AISM01F.
3. Follow the pairing instruction to pair your device.
Technical Support
Music:
Press button to play and pause
songs (Use your device to
change the volume and track)
Warranty
Connect
to wired
headphones
and earbuds
*Bluetooth enabled
Connect to stereos, speaker docks and
car stereos with an AUX IN (3.5 mm)
3.5 mm
cable
OR
Stream audio up
to 33 feet
Smartphone*
Computer*
Tablet*
LEDs
Phone Calls:
Press button to answer, reject
hang up calls, redial last number
and cancel dialing
ON / OFF and pairing
Specyfikacje produktu
| Marka: | Aluratek |
| Kategoria: | Odbiornik Bluetooth |
| Model: | AISM01F |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Aluratek AISM01F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Odbiornik Bluetooth Aluratek
12 Września 2024
12 Września 2024
12 Września 2024
11 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
8 Września 2024
8 Września 2024
8 Września 2024
Instrukcje Odbiornik Bluetooth
- Odbiornik Bluetooth Yamaha
- Odbiornik Bluetooth Logitech
- Odbiornik Bluetooth Cambridge
- Odbiornik Bluetooth Lindy
- Odbiornik Bluetooth Oehlbach
- Odbiornik Bluetooth Audioengine
- Odbiornik Bluetooth Focal
- Odbiornik Bluetooth Adj
- Odbiornik Bluetooth Terratec
- Odbiornik Bluetooth Naxa
- Odbiornik Bluetooth T'nB
- Odbiornik Bluetooth Autovision
- Odbiornik Bluetooth Monoprice
- Odbiornik Bluetooth Vantec
- Odbiornik Bluetooth Legrand
- Odbiornik Bluetooth Wavemaster
Najnowsze instrukcje dla Odbiornik Bluetooth
7 Października 2024
2 Października 2024
1 Października 2024
1 Października 2024
29 Września 2024
23 Września 2024
21 Września 2024
20 Września 2024
17 Września 2024
15 Września 2024