Instrukcja obsługi Aluratek ABT05F
Aluratek
Odbiornik Bluetooth
ABT05F
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aluratek ABT05F (1 stron) w kategorii Odbiornik Bluetooth. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
Package Contents Product Highlights Product Application
Operation Operation
WARNING!!! This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by whatever measures may be
required to correct the interference.
Radio and TV Interference Statement
qsg Q10517 Copyright © 2019 Aluratek, Inc. All Rights Reserved.
aluratek.com
model ABT05F
Quick Start Guide
Universal Bluetooth Audio Transmitter
Technical Support and Warranty
If you need further assistance, please contact the Aluratek support department for
troubleshooting prior to returning this device.
E-mail: support@aluratek.com
Web: www.aluratek.com/helpdesk
Local (Irvine, CA): 714-586-8730
Toll free: 1-866-580-1978
Control Functions
Function Operation
Power ON When OFF, slide power button to ON side,blue LED light flashes once
Pairing
Clear Pairing
List:
Short press pairing button to enter pairing mode, blue and red led light
flashes alternately (short press pairing button can enter pairing mode to
pair 2nd device when 1st device is connected and the 1st device will be
disconnected).
When OFF, long press pairing button around 8 seconds until blue and
red LED flash once at the same time
Connect with the
last two devices:
ABT05F will automatically reconnect to the last two connected devices
when it is powered on. Red light flashes 1-2 times if connected successfully.
Power OFF When ON, slide power button to OFF side,red LED light flashes once
Streaming while
charging
ABT05F is able to stream when it is charging.
Pairing
1. Make sure ABT05F is turned off
2. Activate your device’s Bluetooth function and set your device to search for Bluetooth
device.
3. Slide power button to ON side,blue LED light flashes once (When ABT05F is powered
on, it will enter pairing mode directly if there is no pairing record.)
4.Short press pairing button to enter pairing mode, blue and red Led light flashed
alternately.
5. ABT05F and your Bluetooth device will pair automatically. (Please make sure they are
next to each other.)
6. After connecting successfully, the blue LED will flash.
Note: After the initial pairing of your Bluetooth device with ABT05F, it is recommend that you power on your Bluetooth
device first before you power on ABT05F for subsequent uses for faster reconnection.
Your order has been carefully packaged and inspected. The following accessories should
be included in your package. Please inspect the contents of the package to ensure that
you have received all items and that nothing has been damaged. If you discover a problem,
please contact us immediately for assistance.
Operation
LED Indicators
LED Indicator Status
When connected via aptX-LL
When connected via aptX
When connected via SBC
Blue LED flashes 3 times every 5 seconds.
Blue LED flashes 2 times every 5 seconds.
Blue LED flashes 1 times every 5 seconds
Standby statusFlashing Blue Twice (Every 10 Seconds)
Flashing Red Three times (Every 60 Seconds)
Charging The Battery
The battery is not fully charged and it is highly recommended that you charge ABT05F
before you begin using it.
Note: Using ABT05F “out of the box” will not harm the device. You will experience
reduced battery life as the unit will not be fully charged.
Connect the larger USB end of the cable provided to your PC or USB power adapter or
powerbank (not included). Plug the smaller Micro USB to the charging port of ABT05F.
Please charge the battery for a minimum of 3 hours. The red LED will be on while
charging. When charging is complete, the red LED will turn OFF.
Operation
Operation
Transmit
audio up
to 50 feet
(15 m)
Bluetooth
Headphones
Bluetooth
Earbuds
Bluetooth
Speakers
Pair With Two Devices At The Same Time
This unit could connect with two stereo Bluetooth speaker or Bluetooth headset to play
music simultaneously.
1. Follow the previous instructions in the “Pairing” section to pair ABT05F with your first
device.
2. After the first device is connected, short press the pairing button to enter pairing mode
again.
3. Power on the second device and activate its pairing mode.
4. The second device will pair automatically
Note: If there is no sound after the second pairing, please power OFF and ON ABT05F to reconnect
Aluratek warrants this product against defect in material or workmanship for 1 YEAR
from the date of purchase.
For more information, please visit: https://aluratek.com/warranty-return-policy
You can register your product online at: https://aluratek.com/product-registration
Troubleshooting
If both red and blue LED lights stays on or if the device is not responding, follow below
steps to reset the transmitter.
1. Press and hold the pairing button
2. While holding the pairing button, connect the USB charging cable which is connected
to either a power adapter or computer
3. Release the pairing button when the red and blue LED lights are flashing alternately
4. The transmitter is now reset and ready to pair again
Supports dual streaming.
Two devices can be used
simultaneously.
with Bluetooth 5
USB Charging Cable 3.5mm Audio Cable RCA-Y Cable
Power Button
Micro USB Charging Port
3.5mm Audio Port
LED Indicator
Pairing Button
Computer
Connect to any audio
device with an AUX OUT
(3.5 mm) port
RCA-Y
cable
Home Stereo
Receiver
3.5 mm
cable
TV
Connect to any
device with RCA OUT
(RCA cable included)
MP3 Player
TV
Low battery status
Specyfikacje produktu
| Marka: | Aluratek |
| Kategoria: | Odbiornik Bluetooth |
| Model: | ABT05F |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Aluratek ABT05F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Odbiornik Bluetooth Aluratek
12 Września 2024
12 Września 2024
12 Września 2024
11 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
8 Września 2024
7 Września 2024
Instrukcje Odbiornik Bluetooth
- Odbiornik Bluetooth Yamaha
- Odbiornik Bluetooth Lindy
- Odbiornik Bluetooth Oehlbach
- Odbiornik Bluetooth Audioengine
- Odbiornik Bluetooth Focal
- Odbiornik Bluetooth Terratec
- Odbiornik Bluetooth Naxa
- Odbiornik Bluetooth T'nB
- Odbiornik Bluetooth Autovision
- Odbiornik Bluetooth Monoprice
- Odbiornik Bluetooth Vantec
- Odbiornik Bluetooth Legrand
- Odbiornik Bluetooth Wavemaster
Najnowsze instrukcje dla Odbiornik Bluetooth
7 Października 2024
2 Października 2024
1 Października 2024
1 Października 2024
29 Września 2024
23 Września 2024
21 Września 2024
20 Września 2024
17 Września 2024
15 Września 2024