Instrukcja obsługi Aluratek ABH01F

Aluratek słuchawka ABH01F

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aluratek ABH01F (1 stron) w kategorii słuchawka. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

Bluetooth Wireless Stereo Headphones

aluratek.com

Quick Start Guide

ABH01F

On Ear Controls

Operation

Note: The pairing mode will last 2 minutes. ABH01F will switch to the standby mode automatically if

no devices can be connected within 2 minutes.

Pairing with the transmitter such as iPhone, smart phone, and tablet:

Please make sure the device supports A2DP profile. The pairing procedure will vary

depending on the actual device. Please refer to the user guide of your device for

detail instruction. The general pairing procedures are as follows:

1. Make sure ABH01F is turned ON.

2. Activate ABH01F pairing mode by press and hold the button for 8 seconds.

(Red and blue LED will flash rapidly)

3. Activate your device’s Bluetooth function and set your device to search for Bluetooth

devices. Select ABH01F when it is found.

4. For transmitter with Bluetooth version 2.1, you will not need to input a code. If you

are prompted for PIN, please enter “0000”.

5. If prompted by your device to connect, please select “Yes”.

6. After connecting successfully, the blue LED will flash every 3 seconds.

Note: Please make sure the audio output is set to Bluetooth / ABH01F for audio streaming from the device.

For more information, please visit: http://aluratek.com/warranty-return-policy

You can register your product online at: http://aluratek.com/product-registration

E-mail: support@aluratek.com

Web: www.aluratek.com/support

Local (Tustin, CA): 714-586-8730

Toll free: 1-866-580-1978

Aluratek warrants this product against defect in material or workmanship for

1 Year from the date of purchase.

If you need further assistance, please contact the Aluratek support department for

troubleshooting prior to returning this device.

Tech Support & Warranty Information

Operation

Charging the battery

The battery is not fully charged and it is highly recommended that you charge ABH01F

before you begin using it.

Note: Using ABH01F “out of the box” will not harm the device. You will experience reduced battery life as the

unit will not be fully charged.

Connect the USB end of the cable provided to your PC / power adapter. Connect the

other end to the charging port of ABH01F. Please charge the battery for a minimum of

(4) hours. The Red LED will be on while charging. When charging is complete, the

red LED will turn off.

Function Operation LED Indicator

Power On Blue LED ONPress and hold the button for 3 seconds

Radio and TV Interference Statement

WARNING!!! This equipment has been tested and found to comply with the limits of a

Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by whatever measures may be

required to correct the interference.

Power On / Oﬀ / Pair

LED

Headphone jack for wired

connection / charging jack

Previous / Next Track

Microphone

Play / Stop / Answer Call

/ End Call

Volume Control Enter Pairing

Mode

Ensure ABH01F is turned OFF. Press and

hold button for 8 seconds.

Red and blue LED

flashes rapidly

Power Off Press and hold the button until the red

LED is on.

LED OFF

Specyfikacje produktu

Marka:	Aluratek
Kategoria:	słuchawka
Model:	ABH01F
Kolor produktu:	Czarny
Typ produktu:	Zestaw słuchawkowy
Styl noszenia:	Nauszny
Rekomendowane użycie:	Gaming
Typ zestawu słuchawkowego:	Stereofoniczny
Czas odtwarzania muzyki:	10 h
Technologia łączności:	Bezprzewodowy
Bluetooth:	Tak
Profile Bluetooth:	A2DP, AVRCP, HFP, HSP
Wersja Bluetooth:	2.1+EDR
Pasmo częstotliwości:	2.4 GHz
Budowa słuchawek:	Intrafonetyczny
Pasmo przenoszenia:	20 - 20000 Hz
Impedancja:	- Ω
Częstotliwość mikrofonu:	- Hz
Czas ładowania:	3.5 h
Technologia baterii:	Litowo-jonowa (Li-Ion)
Skrócona instrukcja obsługi:	Tak
Złącze 3,5 mm:	Tak
Akumulatorek:	Tak