Instrukcja obsługi Altec Lansing inMotion iM600

Altec Lansing Kołyska/stacja dokująca inMotion iM600

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Altec Lansing inMotion iM600 (8 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

User’s guide

The lightning ﬂash with arrowhead, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufﬁcient magnitude

to constitute a risk of electric shock to persons.

Caution: To prevent the risk of electric shock, do not

remove cover (or back). No user-serviceable parts

inside. Refer servicing to qualiﬁed service personnel.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

C P C OONNECTING THE OWER ORD (AC WALL UTLET)

Snap plug into power supply and then insert the blades into the outlet.

RECHARGEABLE BATTERY

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type. Do not expose to excessive heat such as sunshine, ﬁre, or the like.

The battery used in this product must be recycled or properly disposed of. Instructions for

removing the battery can be found in the “Power” section. Please contact your local recycling

center for proper handling of the battery.

Rated voltage: 3.7V Capacity: 2150mAh Type number: NTA2455

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water — This apparatus shall not be exposed to dripping

or splashing, and no objects ﬁlled with liquids, such as vases, shall be placed on the

apparatus.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions. The apparatus should not be situated on a bed, sofa, rug or similar surface

that may block the ventilation openings. The apparatus must not be placed in a built-in

installation, such as a closed bookcase or cabinet that may impede the ﬂow of air

through the ventilation openings. Ventilation should not be impeded by covering the

openings with items such as newspapers, tablecloths, curtains, etc.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including ampliﬁers) that produce heat.

9. No naked ﬂame sources, such as lighted candles, should be placed on the apparatus.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong are provided for

your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

the replacement of the obsolete outlet.

11. Protect the power cord from being walked on or pinched — particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

12. Do not install in an area which impedes the access to the power plug. Disconnecting the

power plug is the only way to completely remove power to the product and must be

readily accessible at all times.

13. Power source — Use only power supplies of the type speciﬁed in the operating

instructions or as marked on the appliance. If a separate power supply is included with

this apparatus, do not substitute with any other power supply — use only manufacturer-

provided power supplies.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped. For service, refer to

qualiﬁed service personnel, return to the dealer, or call the Altec Lansing service line for

assistance.

16. For products which incorporate batteries, please refer to local regulations for proper

battery disposal.

17. Only use attachments/accessories speciﬁed by the manufacturer.

18. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the

manufacturer or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

ALTEC EAR IMITEDLANSING ONE Y L WARRANTY

(TWO-YEAR L W I T EIMITED ARRANTY N HE UROPEAN UNION AND ASIA)

What Does The Warranty Cover?: Altec Lansing warrants that its products shall be free from

defects in materials or workmanship, with the exceptions stated below.

What Is The Period Of Coverage?: For units purchased in European Union or Asia, this

warranty runs for two years from the date of purchase. For units not purchased in Europe or

Asia, this warranty runs for one year from the date of purchase. The term of any warranties

implied by law shall expire when your limited warranty expires. Some states and/or Member

States in the European Union do not allow limitations on how long an implied warranty lasts,

so the above limitation may not apply to you.

What Does The Warranty Not Cover?: This warranty does not cover any defect, malfunction or

failure that occurs as a result of: improper installation; misuse or failure to follow the product

directions; abuse; or use with improper, unintended or faulty equipment. (For information on

proper installation, operation and use consult the manual supplied with the product. If you

require a replacement manual, you may download a manual from www.alteclansing.com.)

Also, consequential and incidental damages are not recoverable under this warranty. Some

states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its option, repair or

replace any product that proves to be defective in material or workmanship. If your product is

no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your

product with a similar or better Altec Lansing product.

How To Get Warranty Service: To get a covered product repaired or replaced, you must contact

Altec Lansing during the warranty period by email (csupport@alteclansing.com). You must

include in your email, your name, address, email address, telephone number, date of purchase

and a complete description of the problem you are experiencing. In the United States, you may

alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 — please be prepared to

provide the same information. If the problem appears to be related to a defect in material or

workmanship, Altec Lansing will provide you a return authorization and instructions for return

shipment. Return shipments shall be at the customer’s expense, and the return must be

accompanied by the original proof of purchase. You should insure the shipment as appropriate

because you are responsible for the product until it arrives at Altec Lansing.

How Will State Law Affect Your Rights?: This warranty gives you speciﬁc legal rights, and

you may also have other rights which vary from state to state. Please note that in the

European Union, you as a consumer might have other legal rights under national legislation of

European Union Member States governing the sale of Altec Lansing’s goods. Those rights are

not affected by this guarantee.

The above limited warranties and remedies are sole warranties and remedies available to

purchaser, if, and to the extent, valid and enforceable under the applicable law.

C SUSTOMER ERVICE

The answers to most setup and performance questions can be found in the Troubleshooting

guide. You can also consult the FAQs in the customer support section of our Web site at

www.alteclansing.com. If you live in North America and still can’t ﬁnd the information you

need, please call our customer service team for assistance before returning the speakers to

your retailer under their return policy.

Tel: 800-258-3288

Email: csupport@alteclansing.com

If you live outside of North America, please visit our website at www.alteclansing.com and

select your region to locate your country’s distributor.

For the most up-to-date information, be sure to check our Web site at www.alteclansing.com.

INTERNATIONAL DISTRIBUTION

International customers: For information regarding the distribution of Altec Lansing products

in your country, please visit and click on your region.www.alteclansing.com

D O EISPOSAL OF LD LECTRICAL & ELECTRONIC EQUIPMENT

This symbol on the product or on its packaging indicates that this product shall not

be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By ensuring

this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The recycling of materials will help to

conserve natural resources. For more detailed information about recycling of this product,

please contact your local city ofﬁce or your household waste disposal service.

CAUTION

To prevent electric shock do not use this (polarized) plug with an extension cord, receptacle

or other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

INMOTION IM600

DIGITAL SPEAKER YSTEM FOR IS POD

The New Standard from the Company

that Set the Standard

Thank you for purchasing the Altec Lansing iM600

digital speaker system for iPod. When Altec Lansing

introduced the original inMotion, it set new standards

for sound and size and let a whole lot of music out of

the iPod. Today, the new iM600 raises the bar again

with an innovative and performance-leading design.

Box Contents

• inMotion iM600 mobile speaker system

• Wireless remote

• Power supply

• User’s guide and quick connect instructions

Made for:

• iPod touch

• iPod classic

• iPod with video

• iPod nano (3rd generation)

• iPod nano (2nd generation)

• iPod nano (1st generation)

• iPod with color display

• iPod mini

• iPod with dock connector

Placing the INMotion IM600

Open the inMotion iM600 by pressing the button on

the front of the speaker system. Position the inMotion

iM600 on a level surface, preferably close to you (within

three feet).

Assembling the INMotion IM600

Dock your iPod by sliding your iPod on top of the iM600

docking station. If necessary, ﬁrst install the docking

adapter that came with your iPod. While the docking

adapter is not required for proper functioning of your

iPod and iM600, it will provide a better ﬁt.

Note: Alternate audio sources—such as non-dockable

iPod models, CD players, MP3 players, portable DVD

players, and laptops—can also be connected to the

inMotion iM600. For more information, see the

“Connecting to alternate audio source” section.

Power

Use one of the following two options to power your

inMotion iM600:

AC (Wall outlet) Power

Insert the barrel connector from the power supply into

the DC connector on the rear of the inMotion iM600.

After this connection is made, insert the power supply

into a wall outlet.

DC (Battery) Power

The inMotion iM600 features a built-in rechargeable

Lithium-ion battery.

Charging time up to 3 hours

Continuous Playing Time up to 5 hours

Charging the rechargeable battery:

The battery should be fully charged before initial use.

To recharge the battery, insert the barrel connector

from the power supply into the DC connector on the

rear of the inMotion iM600. After this connection is

made, insert the power supply into a wall outlet. The

indicator light turns on. When the battery is fully

recharged, the indicator light turns off.

When the battery icon on the LCD screen displays a

single segment the battery should be recharged.

When the icon starts ﬂashing, the iM600 is about to

shut down.

Warning: During the recharging process it is typical for

the battery to become warm. To be safe, keep

ﬂammable materials away from the inMotion iM600.

Note: To conserve battery power, reduce the inMotion

iM600 volume level.

Disconnecting the rechargeable battery:

1. Unplug the inMotion iM600 from the wall outlet.

2. Open the inMotion iM600 by pressing the button on

the front of the speaker system.

3. Remove the rechargeable battery compartment cover

by removing the 2 screws.

4. Unplug the battery and remove it.

Start Playing

1. Turn on your iPod.

2. Turn on the inMotion iM600 by pushing the

button. The indicator light turns on.

3. Press the SOURCE button until “iPod” is displayed on

the LCD screen.

Note: To avoid hearing a popping sound when you turn

on your inMotion iM600, always turn on your audio

source ﬁrst.

Power Off

Turn off the inMotion iM600 by pushing the button.

The indicator light shuts off.

Auto Shut-down

During battery-only operation the inMotion iM600

automatically shuts down if no audio is detected for

four minutes. Press the button to turn the inMotion

iM600 back on.

NOTE: The Auto Shut-down feature is active during

battery-only operation. If the AC wall adapter is used,

the inMotion iM600 will remain on until the button

is pushed and the indicator light shuts off.

Specyfikacje produktu

Marka:	Altec Lansing
Kategoria:	Kołyska/stacja dokująca
Model:	inMotion iM600

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Altec Lansing inMotion iM600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kołyska/stacja dokująca Altec Lansing

Altec Lansing Orbit-M IMT207 Instrukcja

17 Września 2024

Altec Lansing iM413 Instrukcja

17 Września 2024

Altec Lansing Orbit M IMT237 Instrukcja

16 Września 2024

Altec Lansing inMotion Max IMT702EAM Instrukcja

15 Września 2024

Altec Lansing LIFEJACKET 2 Instrukcja

15 Września 2024

Altec Lansing Moondance Glow M402 Instrukcja

14 Września 2024

Altec Lansing inMotion iM600 Instrukcja

14 Września 2024

Altec Lansing InMotion Max IM702 Instrukcja

14 Września 2024

Altec Lansing Nobi iMT217 Instrukcja

13 Września 2024

Altec Lansing inMotion Instrukcja

13 Września 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago KSP-600 Instrukcja

9 Października 2024

Gembird DD-U3M2 Instrukcja

9 Października 2024

Urban Factory HCS02UF Instrukcja

9 Października 2024

Urban Factory HCS01UF Instrukcja

9 Października 2024

Urban Factory HCS04UF Instrukcja

9 Października 2024

Urban Factory HCS03UF Instrukcja

9 Października 2024

Bose SoundLink Flex 2nd Gen Instrukcja

9 Października 2024

StarTech.com UNIDOCK3UEU Instrukcja

9 Października 2024

StarTech.com SATDOCKU2EGB Instrukcja

9 Października 2024

StarTech.com SATDOCKU3FGB Instrukcja

9 Października 2024