Instrukcja obsługi Alpine SGS-CH01

Alpine kamera samochodowa SGS-CH01

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Alpine SGS-CH01 (11 stron) w kategorii kamera samochodowa. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
Jeep/Chrysler/Dodge
SGS-CH01 1/11z
Jeep Wrangler
SGS-CH01
Factory Radio Camera Interface
with Active Guideline system
Installation Manual
z Model: Wrangler
z Model Year: 2011-2018 Model Year Active Guidlines Static Guidelines
Jeep Wrangler (JK) 2007-2010
Wrangler (JK) 2011-2018
Note
zDesign and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
zThe installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
zBefore you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
zThis manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
DISCLAIMER: The active guideline feature of this product is calibrated for use with JEEP WRANGLER model years
2011-2018. The accuracy of the active guideline system cannot be guaranteed if used in conjunction with other
vehicles or those which contain non-factory parts which may affect the turning radius of the vehicle.
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
zCongratulations on purchasing the SGS-CH01. This installation manual is designed to take you through the
installation of SGS-CH01. Please familiarize yourself with the owners manual and if you still have additional
questions please call 1-800-TECH-101.
Jeep/Chrysler/Dodge
SGS-CH01 2/11z
Types of Precautions
Forbidden
Indicates actions that are
forbidden (must not be performed)
Forbidden
Indicates that disassembly is
forbidden.
Mandatory
Indicates actions that are
mandatory (must be performed)
Marks content that should receive
your full attention.
Warning
Do not disassemble or modify the product.
Doing so could lead to an accident, fire, or
electric shock.
Store screws and other small objects
where small children cannot reach them.
If one of these small objects is swal-
lowed, consult with a doctor immediately.
When replacing fuses, be sure to
use fuses with the specified current
rating. Failing to do so could lead to
an accident or fire.
Only connect the product to a 12 VDC
negative ground car. Failing to do so could
lead to an accident or fire.
Before you begin wiring, remove the
ground wire from the negative terminal of
the battery. Failing to do so could lead to
electric shock or injury.
Do not cut the insulation on a cord and take
power from another device. Doing so could
lead to fire or electric shock.
Do not install the product in a location
where it will obstruct the driver’s forward
view; interfere with the operation of the
steering wheel, gearshift, or the like; or
pose a threat to passengers. Doing so could
lead to an accident or injury.
When making a hole in the vehicle body, be
careful to avoid damaging pipes, the fuel
tank, electrical wiring, and the like. This
kind of damage could lead to an accident
or fire.
When installing and grounding the product,
do not use any of the bolts or nuts of the
steering wheel, brakes, fuel tank, or the
like. Doing so could make the brakes stop
working or lead to fire.
Do not install the product near the
passenger-side airbag. Doing so could
interfere with the operation of the airbag
and lead to an accident or injury.
Bundle cords so that they don’t interfere
with driving. Wrapping cords around the
steering wheel, gearshift, brake pedal,
or the like, could lead to an accident or
damage equipment.
Caution
Connect the product properly according to
the instructions. Failing to do so could lead
to fire or an accident.
Do not sandwich cords between the seat
railing or allow them to touch protrusions.
Resulting breaks or shorts could lead to
electric shock or fire.
Do not block vents or heat sinks. Doing so
could lead to fire or damage equipment.
Use the accessories according to the
instructions, and attach them securely.
Failing to do so could lead to an accident
or damage equipment.
Do not install the product where it may be
exposed to water or in a place with high
levels of humidity or dust. Doing so could
lead to fire or damage equipment.
The installation and wiring of this product
requires specialized skills and experience.
Have the product installed by an Alpine
authorized dealer.
Forbidden
Forbidden Mandatory
Mandatory
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Forbidden
Jeep/Chrysler/Dodge
SGS-CH01 3/11z
Tools Possibly Required (This Will Vary Depending On The Vehicle)
Panel Removing Tool Sockets Phillips Screwdriver
Wire Cutters Extension Ratchet
Crimpers Pliers Torx Screwdriver
Accessory List
Installation Kit Parts
Interface Module Camera Harness Main Harness
CAM TRIG
Cable Ties x 2 Velcro x 2
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.

Specyfikacje produktu

Marka: Alpine
Kategoria: kamera samochodowa
Model: SGS-CH01

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Alpine SGS-CH01, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera samochodowa Alpine

Alpine

Alpine KCX-C2600B Instrukcja

8 Października 2024
Alpine

Alpine KCX-C250MC Instrukcja

30 Września 2024
Alpine

Alpine KCX-C200B Instrukcja

22 Września 2024
Alpine

Alpine SGS-CH01 Instrukcja

23 Sierpnia 2024
Alpine

Alpine DVR-F800PRO Instrukcja

16 Sierpnia 2024
Alpine

Alpine RVC-C320 Instrukcja

15 Sierpnia 2024
Alpine

Alpine DVR-F200 Instrukcja

14 Sierpnia 2024
Alpine

Alpine HCE-C2600FD Instrukcja

6 Lipca 2024
Alpine

Alpine HCE-C114 Instrukcja

14 Maja 2024

Instrukcje kamera samochodowa

Najnowsze instrukcje dla kamera samochodowa

JVC

JVC KV-DR305W Instrukcja

15 Października 2024
Mio

Mio MiVue Mirror R30 Instrukcja

14 Października 2024
Kenwood

Kenwood DRV-A610W Instrukcja

9 Października 2024
EchoMaster

EchoMaster Clear-View MRCHDDVRBR Instrukcja

9 Października 2024
EchoMaster

EchoMaster MRCHDDVR2 Instrukcja

9 Października 2024
Pioneer

Pioneer VREC-200CH Instrukcja

9 Października 2024
Pioneer

Pioneer AD-PLF100 Instrukcja

9 Października 2024
Uniden

Uniden Dash View 50R Instrukcja

9 Października 2024
BlackVue

BlackVue DR970X-2CH Plus Instrukcja

8 Października 2024
Minolta

Minolta MNCD245T Instrukcja

8 Października 2024