Instrukcja obsługi Allen & Heath XONE:4D

Allen & Heath Sprzęt DJ-ski XONE:4D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Allen & Heath XONE:4D (48 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/48
Allen & Heath XONE:4D User Guide
USER GUIDE
Publication AP7265
Allen & Heath 2 XONE:4D User Guide
Limited One Year Warranty
This product is warranted to be free from defects in materials or
workmanship for period of one year from the date of purchase by the
original owner.
To ensure a high level of performance and reliability for which this
equipment has been designed and manufactured, read this User Guide
before operating. In the event of a failure, notify and return the
defective unit to ALLEN & HEATH Limited or its authorised agent as
soon as possible for repair under warranty subject to the following
conditions
Conditions Of Warranty
The equipment has been installed and operated in accordance with the
instructions in this User Guide.
The equipment has not been subject to misuse either intended or
accidental, neglect, or alteration other than as described in the User
Guide or Service Manual, or approved by ALLEN & HEATH.
Any necessary adjustment, alteration or repair has been carried out by
ALLEN & HEATH or its authorised agent.
This warranty does not cover fader wear and tear.
The defective unit is to be returned carriage prepaid to ALLEN &
HEATH or its authorised agent with proof of purchase.
Units returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your ALLEN &
HEATH agent for any additional warranty which may apply.
This product complies with the European Electro magnetic
Compatibility directives 89/336/EEC & 92/31/EEC and the
European Low Voltage Directives 73/23/EEC & 93/68/EEC.
This product has been tested to EN55103 Parts 1 & 2 1996 for use in
Environments E1, E2, E3, and E4 to demonstrate compliance with the
protection requirements in the European EMC directive 89/336/EEC.
During some tests the specified performance figures of the product were
affected. This is considered permissible and the product has been passed as
acceptable for its intended use. Allen & Heath has a strict policy of
ensuring all products are tested to the latest safety and EMC standards.
Customers requiring more information about EMC and safety issues can
contact Allen & Heath.
XONE:4D User Guide AP7265
Copyright © 2008 Allen & Heath Limited. All rights reserved
Allen & Heath Limited
Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
http://www.allen-heath.com http://www.xone.co.uk
Allen & Heath 3 XONE:4D User Guide
Warranty .............................................. 2
Packed Items........................................ 4
Software Installation PC.................... 5
Checking the Windows Driver
Installation ............................................ 7
Software Installation MAC................ 8
Checking the Mac Driver
Installation ............................................ 10
MIDI Channel Setup........................... 11
MIDI Map and Light Pipe Setup....... 12
Soundcard Architecture .................... 13
Soundcard Software Description.... 14
Ableton Setup...................................... 15
Traktor Setup....................................... 16
Panel Drawings.................................... 17
Introduction ......................................... 18
Description .......................................... 19
Soundcard Input Block Diagram ..... 21
Soundcard Output / MIDI
Block Diagram..................................... 22
Channel Input ...................................... 23
Mix and Monitor................................. 26
Filters and LFO.................................... 28
FX Returns and Crossfader ............. 29
Front Controls and Connectors..... 30
Rear Connectors................................ 31
BPM Counter....................................... 34
LFO ........................................................ 36
The LFO Editor................................... 37
MIDI Control Section........................ 38
CONTENTS
Congratulations on purchasing the Allen & Heath Xone:4D performance
DJ mixer. To ensure that you get the maximum benefit from the unit
please spare a few minutes familiarising yourself with the controls and
setup procedures outlined in this user guide. For further information
please refer to the additional information available on our web site, or
contact our technical support team.
http://www.xone.co.uk
MIDI Implementation Chart ............ 40
MIDI Note Chart ............................... 41
Filter Reference .................................. 42
Operating Levels................................. 43
Earthing................................................. 44
Cables And Connectors.................... 45
User Options ...................................... 46
Specifications ....................................... 47
Product Registration.......................... 48

Specyfikacje produktu

Marka: Allen & Heath
Kategoria: Sprzęt DJ-ski
Model: XONE:4D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Allen & Heath XONE:4D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt DJ-ski Allen & Heath

Allen & Heath

Allen & Heath Xone:PX5 Instrukcja

7 Sierpnia 2024
Allen & Heath

Allen & Heath XONE:4D Instrukcja

3 Lipca 2024

Instrukcje Sprzęt DJ-ski

Najnowsze instrukcje dla Sprzęt DJ-ski

Line 6

Line 6 Helix Control Instrukcja

11 Stycznia 2025
AlphaTheta

AlphaTheta DDJ-GRV6 Instrukcja

8 Stycznia 2025
Glorious

Glorious Record Box 55 Instrukcja

4 Stycznia 2025
Glorious

Glorious Record Box Display Door Instrukcja

4 Stycznia 2025
Glorious

Glorious Session Cube XL Instrukcja

4 Stycznia 2025
Glorious

Glorious Modular Mix Station Instrukcja

4 Stycznia 2025
Glorious

Glorious Record Box Advanced 110 Instrukcja

4 Stycznia 2025
Glorious

Glorious Mix Station 2 Instrukcja

4 Stycznia 2025
Glorious

Glorious CD Box 90 Instrukcja

4 Stycznia 2025
Glorious

Glorious Record Box 230 Instrukcja

4 Stycznia 2025