Instrukcja obsługi Allen & Heath MIXWIZARD WZ4 14:4:2

Allen & Heath Konsola miksująca MIXWIZARD WZ4 14:4:2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Allen & Heath MIXWIZARD WZ4 14:4:2 (28 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
USER GUIDE
Publication AP8666
MixWizard WZ
4
14:4:2
Allen & Heath 2 WZ
4
14:4:2 User Guide
Limited One Year Warranty
This product is warranted to be free from defects in materials or workmanship for
period of one year from the date of purchase by the original owner.
To ensure a high level of performance and reliability for which this equipment has been
designed and manufactured, read this User Guide before operating. In the event of a
failure, notify and return the defective unit to ALLEN & HEATH Limited or its
authorised agent as soon as possible for repair under warranty subject to the following
conditions
Conditions Of Warranty
The equipment has been installed and operated in accordance with the instructions in
this User Guide.
The equipment has not been subject to misuse either intended or accidental, neglect,
or alteration other than as described in the User Guide or Service Manual, or approved
by ALLEN & HEATH.
Any necessary adjustment, alteration or repair has been carried out by ALLEN &
HEATH or its authorised agent.
This warranty does not cover fader wear and tear.
The defective unit is to be returned carriage prepaid to ALLEN & HEATH or its
authorised agent with proof of purchase.
Units returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your ALLEN & HEATH agent for
any additional warranty which may apply.
This product has been tested to EN55103 Parts 1 & 2 2009 for use in Environments E1, E2,
E3, and E4 to demonstrate compliance with the protection requirements in the European
EMC directive 2004/108/EC. During some tests the specified performance figures of the
product were affected. This is considered permissible and the product has been passed as
acceptable for its intended use. Allen & Heath has a strict policy of ensuring all products
are tested to the latest safety and EMC standards. Customers requiring more information
about EMC and safety issues can contact Allen & Heath.
NOTE: Any changes or modifications to the console not approved by Allen & Heath
could void the compliance of the console and therefore the users authority to operate it.
Allen & Heath WZ
4
14:4:2 User Guide AP8666 Issue 1
Copyright © 2013 Allen & Heath Limited. All rights reserved
Allen & Heath Limited
Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
http://www.allen-heath.com
This product complies with the European Electromagnetic Compatibility directive 2004/108/EC
and the European Low Voltage directive 2006/95/EC.
Allen & Heath 3 WZ
4
14:4:2 User Guide
WARNING: This equipment must be earthed.
ATTENTION: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
Read instructions: Retain these safety and operating instructions for future reference. Adhere to all
warnings printed here and on the console. Follow the operating instructions print-
ed in this User Guide.
Do not remove cover: Operate the console with its covers correctly fitted. Disconnect mains power by
unplugging the power cord if the cover needs to be removed for setting internal
options. Refer this work to competent technical personnel only.
Power sources: Connect the console to a mains power unit only of the type described in this User
Guide and marked on the rear panel. Use the power cord with sealed mains plug
appropriate for your local mains supply as provided with the console. If the pro-
vided plug does not fit into your outlet consult your service agent for assistance.
Power cord routing: Route the power cord so that it is not likely to be walked on, stretched or
pinched by items placed upon or against it.
Grounding: Do not defeat the grounding and polarisation means of the power cord plug. Do
not remove or tamper with the ground connection in the power cord
Water and moisture: To reduce the risk of fire or electric shock do not expose the console to rain or
moisture or use it in damp or wet conditions. Do not place containers of liquids
on it which might spill into any openings.
Ventilation: Do not obstruct the ventilation slots or position the console where the air flow
required for ventilation is impeded. If the console is to be operated in a rack unit
or flightcase ensure that it is constructed to allow adequate ventilation.
Heat and vibration: Do not locate the console in a place subject to excessive heat or direct sunlight as
this could be a fire hazard. Locate the console away from any equipment which
produces heat or causes excessive vibration.
Servicing: Switch off the equipment and unplug the power cord immediately if it is exposed
to moisture, spilled liquid, objects fallen into the openings, the power cord or plug
become damaged, during lightning storms, or if smoke, odour or noise is noticed.
Refer servicing to qualified technical personnel only.
Installation: Install the console in accordance with the instructions printed in this User Guide.
Do not connect the output of power amplifiers directly to the console. Use audio
connectors and plugs only for their intended purpose.
CAUTION
WARNING -
Read the following before proceeding :
Safety Instructions


Specyfikacje produktu

Marka: Allen & Heath
Kategoria: Konsola miksująca
Model: MIXWIZARD WZ4 14:4:2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Allen & Heath MIXWIZARD WZ4 14:4:2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Konsola miksująca Allen & Heath

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

Behringer

Behringer XENYX QX2442USB Instrukcja

14 Października 2024
Koenic

Koenic KHB 800 Instrukcja

14 Października 2024
Ibiza Sound

Ibiza Sound MX801 Instrukcja

14 Października 2024
Pyle Pro

Pyle Pro PMXU83BT Instrukcja

12 Października 2024
Vonyx

Vonyx VMA106 Instrukcja

9 Października 2024
Røde

Røde RØDECaster Duo Instrukcja

8 Października 2024
Valcom

Valcom V-9985 Instrukcja

8 Października 2024
Valcom

Valcom V-9983 Instrukcja

8 Października 2024
Valcom

Valcom V-9984 Instrukcja

8 Października 2024
Glemm

Glemm MX 4816 Instrukcja

8 Października 2024