Instrukcja obsługi Allen & Heath GLD Digital Audio Mixing System

Allen & Heath Konsola miksująca GLD Digital Audio Mixing System

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Allen & Heath GLD Digital Audio Mixing System (32 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
GLD Digital Audio Mixing System
User Guide
For firmware Version V1.1
Check the Allen & Heath web site for the latest version available
Publication AP8561
GLD User Guide 2 AP8561 iss.2
The GLD range of products complies with the European
Electromagnetic Compatibility directives 2004/108/EC and the
European Low Voltage directives 2006/95/EC.
Any changes or modifications to the equipment not approved by Allen & Heath
could void the compliance of the product and therefore the users authority to
operate it.
GLD User Guide AP8561 Issue 2
Copyright © 2013 Allen & Heath. All rights reserved
Allen & Heath Limited, Kernick Industrial Estate, Penryn, Cornwall, TR10 9LU, UK
http://www.allen-heath.com
Limited One Year Manufacturer’s Warranty
This product is warranted to be free from defects in materials or workmanship for period of
one year from the date of purchase by the original owner.
To ensure a high level of performance and reliability for which this equipment has been
designed and manufactured, read this User Guide before operating.
In the event of a failure, notify and return the defective unit to the place of purchase. If this
is not possible then please contact the authorised ALLEN & HEATH distributor or agent in
your country as soon as possible for repair under warranty subject to the following
conditions:
Conditions Of Warranty
The equipment has been installed and operated in accordance with the instructions in this
User Guide.
The equipment has not been subject to misuse either intended or accidental, neglect, or
alteration other than as described in the User Guide or Service Manual, or approved by
ALLEN & HEATH.
Any necessary adjustment, alteration or repair has been carried out by an authorised
ALLEN & HEATH distributor or agent.
This warranty does not cover fader wear and tear.
The defective unit is to be returned carriage prepaid to the place of purchase, an authorised
ALLEN & HEATH distributor or agent with proof of purchase. Please discuss this with the
distributor or the agent before shipping.
If the unit is to be repaired in a different country to that of its purchase the repair may take
longer than normal, whilst the warranty is confirmed and parts are sourced.
Units returned should be packed to avoid transit damage.
In certain territories the terms may vary. Check with your ALLEN & HEATH distributor or
agent for any additional warranty which may apply.
If further assistance is required please contact Allen & Heath Ltd.
GLD User Guide 3 AP8561 iss.2
IMPORTANT - Read these instructions before starting:
Safety instructions
Before starting, read the Important Safety Instructions printed on the sheets supplied with the
equipment. For your own safety and that of the operator, technical crew and performers, follow
all instructions and heed all warnings printed on the sheet and on the equipment panels.
System operating firmware
The function of the GLD is determined by the firmware (operating software) that runs it. Firmware
is updated regularly as new features are added and improvements made. This guide relates to
Version 1.1 firmware.
The latest firmware can be downloaded from the Allen & Heath web site, transferred to USB key
and then loaded into the GLD mixer using the Firmware Update utility. If the AudioRack firmware
is different to that running on the mixer it is automatically updated by the GLD mixer when the
mixer powers up.
Check the Allen & Heath web site for the latest version of GLD firmware.
Software licence agreement
By using this Allen & Heath product and the software within it you agree to be bound by the terms
of the relevant End User Licence Agreement (EULA), a copy of which can be found on the Allen
& Heath website in the product's pages and in the About section of the GLD built-in Help Manual.
You agree to be bound by the terms of the EULA by installing, copying, or using the software.
Further information
For further information about the GLD please refer to the user guides associated with each
system component. Also refer to the GLD Touch Screen Reference Guide available on the web
site, and use the on-screen Help Manual available on the GLD-80 surface. Refer to the Allen &
Heath web site for additional downloads, resources, knowledgebase and technical support.
General precautions
To prevent damage to the controls and cosmetics, avoid placing heavy objects on the
control surface, obstructing movement of the motorised faders, scratching the surface or
touch screen with sharp objects, or rough handling and vibration.
Protect the equipment from damage through liquid or dust contamination. Avoid dust or
small objects getting into the fader slots. Cover the mixer when it is not being used for a
long period.
Computer and touch screen technology can be affected by extreme cold. If the
equipment has been stored in sub-zero temperatures allow time for it to reach normal
operating temperature before use at the venue. Recommended operating temperature
for GLD is 5 to 35 degrees Celsius.
Avoid using the equipment in extreme heat and direct sunlight. Make sure the mixer and
rack ventilation slots are not obstructed and that there is adequate air movement around
the equipment.
Transport the GLD-80 using a touring grade, purpose designed flightcase with adequate
foam lining and internal support for protection.
Clean the control surface with a soft brush and dry lint-free cloth. Avoid the use of
chemicals, abrasives or solvents.
It is recommended that servicing is carried out only by an authorised Allen & Heath agent.
Contact details for your local distributor can be found on the Allen & Heath web site.
Allen & Heath do not accept liability for damage caused by maintenance, repair or
modification by unauthorised personnel.

Specyfikacje produktu

Marka: Allen & Heath
Kategoria: Konsola miksująca
Model: GLD Digital Audio Mixing System

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Allen & Heath GLD Digital Audio Mixing System, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konsola miksująca Allen & Heath

Allen & Heath

Allen & Heath Qu-Pac Instrukcja

3 Października 2024
Allen & Heath

Allen & Heath Dante V2 Instrukcja

26 Września 2024
Allen & Heath

Allen & Heath AR84 Instrukcja

25 Września 2024
Allen & Heath

Allen & Heath dLive DX32 Instrukcja

19 Września 2024
Allen & Heath

Allen & Heath ZED SIXTY-10FX Instrukcja

19 Września 2024
Allen & Heath

Allen & Heath SQ-7 Instrukcja

14 Września 2024
Allen & Heath

Allen & Heath ZED-10FX Instrukcja

14 Września 2024
Allen & Heath

Allen & Heath XONE:DB4 Instrukcja

13 Września 2024
Allen & Heath

Allen & Heath MIXWIZARD WZ4 14:4:2 Instrukcja

10 Września 2024
Allen & Heath

Allen & Heath XONE:42 Instrukcja

8 Września 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

American Audio

American Audio Q-D6 Instrukcja

15 Stycznia 2025
ADB

ADB ME1163 Instrukcja

15 Stycznia 2025
Samson

Samson L1200 Instrukcja

14 Stycznia 2025
Samson

Samson MDR624 Instrukcja

14 Stycznia 2025
Konig

Konig KN-DIGICON20 Instrukcja

11 Stycznia 2025
Vonyx

Vonyx STM500BT Instrukcja

11 Stycznia 2025
Rane

Rane Sixty-Four Instrukcja

11 Stycznia 2025
Wharfedale

Wharfedale SL 1224 USB Instrukcja

11 Stycznia 2025
Glemm

Glemm MXD 08 Instrukcja

10 Stycznia 2025
Alfatron

Alfatron ALF-VMix41 Instrukcja

8 Stycznia 2025