Instrukcja obsล‚ugi Alfa R36AH

Alfa router R36AH

Przeczytaj poniลผej ๐Ÿ“– instrukcjฤ™ obsล‚ugi w jฤ™zyku polskim dla Alfa R36AH (2 stron) w kategorii router. Ta instrukcja byล‚a pomocna dla 5 osรณb i zostaล‚a oceniona przez 2 uลผytkownikรณw na ล›rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Multifunctional Wireless Router
Installation GuideR36AH
Front Panel Rear Panel
Device Overview
Func onal Descrip ons๎žŸ ๎žŸ
In Broadband Router mode:
This port is set as WAN to be connect with Ethernet port on the DSL/cable modem
for PPPoE /Dynamic IP/Sta c IP/PPTP/L2TP IP address alloca on๎žŸ ๎žŸ
In 3G/4G Router mode:
This port is set as LAN to share Internet access via Ethernet connec on to the๎žŸ
desktop/laptop computer or network peripherals
In WiFi Hotspot Extender Router mode:
This port is set as LAN to share Internet access via Ethernet port on the
desktop/laptop computer or network peripherals
These ports are set as LAN to share Internet access via Ethernet with
desktop/laptop computer(s) or network peripherals
๎™จ๎ž๎œž๎˜ƒ๎œ๎œž๎žŒ๎žŸ๎œฎ๎œž๎œš๎˜ƒUSB wireless adapter to connect to remote WiFi hotspot as Internet source
Plug in as source of Internet access๎œ๎œž๎žŒ๎žŸ๎œฎ๎œž๎œš๎˜ƒ3G/4G USB modem
Connect an antenna to ANT port๎˜ƒ๎œจ๎ฝ๎žŒ๎˜ƒ๎œ๎ฝ๎ต๎ต๎žต๎ถ๎๎œ๎œ‚๎žŸ๎ฝ๎ถ๎ž๎˜ƒ๎๎ถ๎˜ƒ๎žŒ๎ฝ๎žต๎žš๎œž๎žŒ๎ฅ›๎ž๎˜ƒ๎Ÿ๎๎žŒ๎œž๎ฏ๎œž๎ž๎ž๎˜ƒ๎ถ๎œž๎žš๎Ÿ๎ฝ๎žŒ๎ฌ
This port is used to connect to the power adapter.
Please use the power adapter in package to ensure device proper opera on. ๎žŸ
Interface
WAN / LAN2
PoE LAN1
USB
ANT
PWR
1
3 4
Before setting up, please check with your service provider to obtain an instruction sheet
for Internet access.
Info you will need from ISP (Internet Service Provider) company for Internet access:
xDSL PPPoE, PPTP, L2TP
3G/4G Intenet access service
An instruction sheet for Internet access from carrier company
Wireless hotspot Internet access service
An instruction sheet with hotspot connection parameters:
SSID, username/password, โ€ฆetc. if any) for Internet Access from carrier company
Access to the RouterPreparation Before Installation
Via Wired Connection
Connect computer to LAN1 port on device via Ethernet RJ-45 cable.
Open your web browser, and type-in โ€œ
alfa.myalfasetup.comโ€ or
โ€œ
192.168.36.1โ€ in the address bar.
Via Wireless Connection
On your laptop, tablet computer or smartphone, enable WiFi service on your
device, and search WiFi nameโ€œ
R36AH-xxxxxxโ€, then associate with it.
Open your web browser, and type-in โ€œ
alfa.myalfasetup.comโ€ or
โ€ in the address bar.โ€œ192.168.36.1
alfa.myalfasetup.com
Before proceeding any further, please make sure the LAN1 LED is โ€œONโ€.
Before proceeding any further, please make sure the wireless LED is โ€œONโ€.
USB 3G/4G Router
Connect 3G/4G USB modem
to router, and share Internet
with local computers,
smartphones or other network
peripherals.
Wireless hotspot extender
Obtain Internet access from a
wireless Internet service
provider (WISP) wirelessly, and
share Internet with local
computers, smartphones or
other network peripherals.
Ethernet Router
Subscribe xDSL PPPoE, fixed IP
,dynamic IP, PPTP, L2TP
Internet access from ISP
(Internet Service Provider),
and share Internet with local
computers, smartphones or
other network peripherals.
Modem
Internet
WiFi Hotspot
3G/4G USB Modem 4G Tower
Operation Modes
2
On - Power on
๎™‹๎œซ - No power
On - Device is up, and running properly
Blinking - This LED blinks when device is sending or receiving data
On - LAN port is connected
๎™‹๎œซ ๎ฅฒ๎˜ƒ๎™…๎ฝ๎˜ƒ๎œ๎ฝ๎ถ๎ถ๎œž๎œ๎žŸ๎ฝ๎ถ๎˜ƒ๎ฝ๎ถ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎˜พ๎˜„๎™…๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš
Flashing๎˜ƒ๎ฅฒ๎˜ƒ๎˜พ๎˜„๎™…๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš๎˜ƒ๎œ‚๎œ๎žŸ๎Ÿ€๎๎žŸ๎œž๎ž
On - USB device recognized, and supported by the router
Blinking - USB device NOT recognized, Internet access is not available
๎™‹๎œซ ๎ฅฒ๎˜ƒ๎™…๎ฝ๎˜ƒ๎œ๎ฝ๎ถ๎ถ๎œž๎œ๎žŸ๎ฝ๎ถ๎˜ƒ๎žš๎ฝ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎™จ๎™ž๎˜‘๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš
On๎˜ƒ๎ฅฒ๎˜ƒ๎˜’๎ฝ๎ถ๎ถ๎œž๎œ๎žŸ๎ฝ๎ถ๎˜ƒ๎žš๎ฝ๎˜ƒ๎žš๎š๎œž๎˜ƒ๎ต๎ฝ๎œš๎œž๎ต๎˜ƒ๎œ‚๎žฉ๎œ‚๎œ๎š๎œž๎œš๎˜ƒ๎žš๎ฝ๎˜ƒ๎˜พ๎˜„๎™…๎งฎ๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš๎˜ƒ๎๎ž๎˜ƒ๎œž๎ž๎žš๎œ‚๎œ๎ฏ๎๎ž๎š๎œž๎œš๎ฅ˜๎˜ƒ
๎™‹๎œซ ๎ฅฒ๎˜ƒ๎™…๎ฝ๎˜ƒ๎œ๎ฝ๎ถ๎ถ๎œž๎œ๎žŸ๎ฝ๎ถ๎˜ƒ๎žš๎ฝ๎˜ƒ๎™ด๎˜„๎™…๎˜ƒ๎ฅพ๎˜ฏ๎ถ๎žš๎œž๎žŒ๎ถ๎œž๎žš๎ฅฟ๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš๎˜ƒ
Flashing๎˜ƒ๎ฅฒ๎˜ƒ๎˜˜๎œ‚๎žš๎œ‚๎˜ƒ๎๎ž๎˜ƒ๎œ๎œž๎๎ถ๎๎˜ƒ๎žš๎žŒ๎œ‚๎ถ๎ž๎ต๎๎žฉ๎œž๎œš๎˜ƒ๎ฝ๎žŒ๎˜ƒ๎žŒ๎œž๎œ๎œž๎๎Ÿ€๎œž๎œš๎˜ƒ๎Ÿ€๎๎œ‚๎˜ƒ๎žš๎š๎œž๎˜ƒ๎™ด๎˜„๎™…๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš๎ฅ˜
On - Internet or intranet access is available
๎™‹๎œซ - NO Internet/intranet access or the router is set to Ethernet router mode
Blinking (500ms interval): network connected, but NO Internet access
Blinking๎˜ƒ๎˜ƒ๎ฅพ๎งญ๎งฌ๎งฌ๎ต๎ž๎˜ƒ๎๎ถ๎žš๎œž๎žŒ๎Ÿ€๎œ‚๎ฏ๎ฅฟ๎ฅ—๎˜ƒ๎™จ๎™ž๎˜‘๎˜ƒ๎œ๎ฝ๎ถ๎ถ๎œž๎œ๎žŸ๎Ÿ€๎๎žš๎Ÿ‡๎˜ƒ๎ž๎œž๎žŒ๎Ÿ€๎๎œ๎œž๎˜ƒ๎žŒ๎œž๎ž๎žš๎œ‚๎žŒ๎žŸ๎ถ๎๎˜ƒ๎๎ถ๎˜ƒ๎ž‰๎žŒ๎ฝ๎๎žŒ๎œž๎ž๎ž
๎˜˜๎œž๎ž๎œ๎žŒ๎๎ž‰๎žŸ๎ฝ๎ถ๎ž
Toggle to r๎œž๎ž๎žš๎œ‚๎žŒ๎žš๎˜ƒ๎œš๎œž๎Ÿ€๎๎œ๎œž๎˜ƒ๎™จ๎™ž๎˜‘๎˜ƒ๎ž‰๎ฝ๎žŒ๎žš๎˜ƒ๎œ๎ฝ๎ถ๎ถ๎œž๎œ๎žŸ๎Ÿ€๎๎žš๎Ÿ‡๎˜ƒ๎ž๎œž๎žŒ๎Ÿ€๎๎œ๎œž๎ž
๎™ค๎š๎๎ž๎˜ƒ๎œ๎žต๎žฉ๎ฝ๎ถ๎˜ƒ๎๎ž๎˜ƒ๎œš๎๎ž๎œ‚๎œ๎ฏ๎œž๎œš๎˜ƒ๎๎ถ๎˜ƒ๎˜œ๎žš๎š๎œž๎žŒ๎ถ๎œž๎žš๎˜ƒ๎™š๎ฝ๎žต๎žš๎œž๎žŒ๎˜ƒ๎ต๎ฝ๎œš๎œž
๎™—๎žŒ๎œž๎ž๎ž๎˜ƒ๎™š๎˜œ๎™ž๎˜œ๎™ค๎˜ƒ๎œ๎žต๎žฉ๎ฝ๎ถ๎ฅ•๎˜ƒ๎žŒ๎œž๎ฏ๎œž๎œ‚๎ž๎œž๎˜ƒ๎๎žš๎˜ƒ๎Ÿ๎๎žš๎š๎๎ถ๎˜ƒ๎งฑ๎˜ƒ๎ž๎œž๎œ๎ฝ๎ถ๎œš๎ž๎˜ƒ- reboot device
๎Ÿ๎๎žš๎š๎˜ƒ๎žŒ๎žต๎ถ๎ถ๎๎ถ๎๎˜ƒ๎œ๎ฝ๎ถ๎œฎ๎๎žต๎žŒ๎œ‚๎žŸ๎ฝ๎ถ๎˜ƒ๎ž‰๎œ‚๎žŒ๎œ‚๎ต๎œž๎žš๎œž๎žŒ๎ž
๎™—๎žŒ๎œž๎ž๎ž๎˜ƒ๎™š๎˜œ๎™ž๎˜œ๎™ค๎˜ƒ๎œ๎žต๎žฉ๎ฝ๎ถ๎ฅ•๎˜ƒ๎ต๎ฝ๎žŒ๎œž๎˜ƒ๎žš๎š๎œ‚๎ถ๎˜ƒ๎งญ๎งฌ๎˜ƒ๎ž๎œž๎œ๎ฝ๎ถ๎œš๎ž๎ฅ•๎˜ƒ๎žš๎š๎œž๎ถ๎˜ƒ๎žŒ๎œž๎ฏ๎œž๎œ‚๎ž๎œž๎˜ƒ - reboot device
with factory default parameters
LED
PWR
(Blue)
SYS
(Blue)
LAN
(Blue)
WAN / USB
(Blue)
WAN / LAN2
(Blue)
Wireless (Blue)
๎˜‘๎žต๎žฉ๎ฝ๎ถ๎ž
Wireless
RESET
(located in the
๎˜ƒ๎œ๎ฝ๎žฉ๎ฝ๎ต๎˜ƒ๎ฝ๎œจ๎˜ƒ๎œš๎œž๎Ÿ€๎๎œ๎œž๎ฅฟ
WAN / LAN2 PoE LAN1 PWRANT
LED Indicators & Buttons
192.168.36.1
Set Up
LAN2 PWRANT
Reset
โ€ข 1 x multi functional wireless
router
โ€ข 1 x omni RP-SMA antenna for
multifunctional wireless router
signal transmission
โ€ข 1 x 12V DC power adapter for
multifunctional wireless router
โ€ข 1 x multifunctional wireless
router installation guide (this ๎˜Ÿle)
โ€ข 1 x Ethernet cable for connecting
the router and computer
Package Content
Thank you for choosing multifunctional wireless router.
Before installing, please check the following items in product package.
Wireless extender router default parameters :
Default device access : alfa.myalfasetup.com 192.168.36.1 or
Default user name : ; default password : de๎˜Ÿned by user
admin
Default SSID : R36AH-xxxxxx
Default wireless encryption : None
If password lost or forgotten, while device is ON, press RESET button in the bottom for
10 seconds then release.
Wait for one minute, device will reboot with default settings and please repeat the
log-in process to setup new password.
Via QR Code Connection
On smartphone/tablet, ๎˜Ÿnd WiFi name โ€œ โ€, and associate with it.
R36AH-xxxxxx
Run QR code reader app, and read the QR code sticker on the router.
In QR code app, se rtal page will be shown.
iOS 11 or later: please ead QR code.
If there is no QR code scanner/reader in your smart phone, please search free "QR
reader" on the Apple App Store or Android Play Store, and install it to read the QR code
sticker on device.
Please setup password when using device for the very ๎˜Ÿrst time.
Device login password here is not the password for WiFi access, please setup the WiFi
password in wireless setting menu.
In 3G/4G router, and WiFi extender router mode, please install compatible USB
peripherals.
Incompatible USB device will not be detected by router, USB LED will be blinking, and a
warning message will appear in web con๎˜Ÿgurator.
Please contact authroized dealer to obtain product information of compatible device.
Operation Mode Selection
With built-in web-based con๎˜Ÿgurator, it is easy to setup and manage device.
The web con๎˜Ÿgurator works with Windows, macOS or UNIX OS computer with a
compatible web browser, such as Google Chrome, Microsoft Internet Explorer, Mozilla
Firefox or Apple Safari.
When logging-in for the ๎˜Ÿrst time, please refer to the instruction sheet from ISP , and
select appropriate device operation mode.
Ethernet Router Mode
Being an Ethernet router, the router supports xDSL PPPoE, ๎˜Ÿxed IP, dynamic IP,
PPTP, L2TP Internet access.
Be sure to connect modem LAN port to WAN port on router, and the WAN LED
should be ON before setting up router.
Please refer to the instruction sheet from ISP, select appropriate connection type,
input the connection parameters (IP address, dialup username/password, server
info ...etc.) to establish the Internet connection, and apply the settings to establish
Internet access.
Access to the Router
5 6
Wireless Hotspot Extender Router Mode
Before proceeding any further, please connect a certi๎˜Ÿed USB wireless adapter,
and make sure the USB LED on router is โ€œONโ€.
After selecting wireless hotspot extender mode, device wizard will scan hotspot
signal automatically.
List of scanned hotspot stations will be displayed on the screen.
Find and select the target wireless hotspot, and input the hotspot password (if any).
Click to establish internet connection.
3G/4G Router Mode
Before proceeding any further, please connect a certi๎˜Ÿed 3G/4G USB modem, and
make sure the USB LED on router is โ€œONโ€.
Please refer to the instruction sheet from ISP, input connection parameters (APN,
username, password ...etc. if any), to establish the Internet connection.
7
When device portal page is connected, to ensure security of device access,
please setup device management password, and click โ€œ โ€. Submit
FINISH
Ethernet Router
Subscribe an xDSL modem from ISP, connect modem to wireless extender router
via Ethernet cable, this mode is mostly used in xDSL PPPoE, ๎˜Ÿxed IP,dynamic IP, PPTP,
Wireless Hotspot Extender
Wireless hotspot extender
Install an compatible USB wireless adapter to extend remote WiFi hotspot Internet access
USB 3G/4G Router
Subscribe a 3G/4G USB modem from ISP, install it with wireless extender
router for mobile Internet access
Network name
R36AH-xxxxxx
Clicking on the โ€œ โ€ on left control panel will refresh machine run-time status.Status
Local Wireless Network Configurations
The router is able to share the Internet access wirelessly with local computers, smartphones,
and other network peripherals.
To establish a secure local wireless
network, please input a โ€œNetwork
Nameโ€ (wireless SSID) and network
password for wireless security.
Connection Status
Once the device setup is completed, device will activate the parameters and the results
will be shown on the status screen.
Access to the Internet
On your laptop, tablet computer or smartphone, search the con๎˜Ÿgured WiFi name or
default name โ€œR36AH-xxxxxxโ€, then associate with it.
Make sure the USB and Wireless LEDs are ON.
Start web browsing or other Internet activities.
Connect computer to LAN port on th e router, make sure the USB and Wireless LEDs
are ON.
Start web browsing or other Internet activities.
Via Wireless Connection
Via Wired Connection
Please make sure device(s) is(are) dynamic IP allocation (DHCP client) enabled when
connecting to/associating with the router.
In Ethernet router mode, USB host service is turned o๎˜ž, USB LED will be OFF. Please utilize
built-in network tools in the function menu of the router to verify Internet availability.
Log In to the Router
DOC NO.: QIG-R36AH-EN-1.1
For more product information, please visit our website for latest product news, and updates.
All other company or product, service names mentioned herein are trademarks or registered trademarks of the respective companies.
Product information / content in this installation guideline may be changed or updated without prior notice.

Specyfikacje produktu

Marka: Alfa
Kategoria: router
Model: R36AH

Potrzebujesz pomocy?

Jeล›li potrzebujesz pomocy z Alfa R36AH, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ…


Instrukcje router Alfa

Alfa

Alfa R36AH Instrukcja

5 Paลบdziernika 2024

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Paลบdziernika 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Paลบdziernika 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Paลบdziernika 2024
TP-Link

TP-Link Archer AXE75 Instrukcja

14 Paลบdziernika 2024
Linksys

Linksys EA8500 Instrukcja

13 Paลบdziernika 2024
Totolink

Totolink ND300 Instrukcja

12 Paลบdziernika 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Paลบdziernika 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Paลบdziernika 2024
Netgear

Netgear FR114P Instrukcja

10 Paลบdziernika 2024
Asus

Asus RT-BE86U Instrukcja

9 Paลบdziernika 2024