Instrukcja obsługi Alesis Elevate 5 MKII

Alesis głośnik Elevate 5 MKII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Alesis Elevate 5 MKII (8 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
User Guide
English ( 3 – 5 )
Guía del usuario
Español ( 6 – 8 )
Guide d’utilisation
Français ( 9 – 11 )
Guida per l’uso
Italiano ( 12 – 14 )
Benutzerhandbuch
Deutsch ( 15 – 17 )
Appendix
English ( 18 )
3
User Guide ( )English
Introduction
1. Make sure all items listed in In
2. Read the safety instruction boo
3. Place the product in an approp
4. Ensure high quality, shielded a
interference.
Box Contents
Elevate 5 MKII Speakers (Stereo
RCA-to-1/8” (3.5 mm) Audio Cab
1/4” (6.35 mm) Interconnection C
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about th
and product registration, visit ales
For additional product support, vi
Setup
Items not listed in Introduction >
Before turning on the right speake
1. Ensure the volume control on E
2. Connect Elevate 5's left and rigcable. 3. Connect any audio sources (suright speaker. Power on the audio sources.4. Connect the included power caplug the other end of the power cable into 5. Flip the power switch on Eleva6. Adjust the volume control on t
Mixer Power
5
Features
Rear Panel
1. RCA Inputs: Use the included
audio cable or other RCA cables
(sold separately) to connect
external sound sources to these
inputs.
2. 1/4” Inputs: Use 1/4” (6.35 mm)
cables (sold separately) to
connect an external sound
source to these inputs.
3. Bass Boost: This 2-position
switch allows you to boost the
speakers’ bass frequencies.
4. Output to Left Speaker: This is
the audio connection to the left
speaker. Use the included 1/4”
(6.35 mm) interconnection cable
to connect the right speaker to
the left speaker.
5. Input from the Right Speaker: This is the audio connection to the right speaker. Use the
included 1/4” (6.35 mm) interconnection cable to connect the left speaker to the right
speaker.
6. Power On/Off Switch: Turns Elevate 5 on or off. To save energy, Elevate 5 will
automatically power off after 30 minutes of not receiving an audio signal from its inputs.
Once Elevate 5 detects an audio signal from its inputs, it will automatically power on again.
7. Power Connector: Plug the included power cable here.
Front Panel
1. Tweeter: This outputs the high
frequencies.
2. Woofer: This outputs the low
frequencies.
3. Headphones: Connect your
1/8” (3.5 mm) headphones to
this output to hear the mix
through your headphones. Note
that while headphones are
connected to Elevate 5, you will
not be able to hear sound out of
your speakers until the
headphones are disconnected.
4. Volume: This knob is used to
adjust the volume of the
speakers.
5. Bass Port: The bass port augments the bass generated by the woofer to increase the low-
frequency SPL over that of non-ported speakers. Make sure this hole is not obstructed
since this will adversely affect bass response.
1 1
2 2
34
55 55
1
2
3
4
5
6
7

Specyfikacje produktu

Marka: Alesis
Kategoria: głośnik
Model: Elevate 5 MKII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Alesis Elevate 5 MKII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Alesis

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024