Instrukcja obsługi Alcatel 29416

Alcatel Telefonia stała 29416

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Alcatel 29416 (1 stron) w kategorii Telefonia stała. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
INTRODUCTION
Your telephone is designed to give you exibility in use, and high
quality performance. To get the most from your new telephone, we
suggest that you take a few minutes right now to read through this
User Manual.
If you have any questions or problems, consult the Troubleshooting
Tips for the solution.
PARTS CHECKLIST
Your package should contain the following items:
Base Handset Coil cord User’s Guide
INSTALLATION AND SETUP
You telephone can be mounted on the wall or placed on a table.
BEFORE YOU BEGIN
MODULAR JACK REQUIREMENTS
You need a RJ11C type modular jack, which is the most
common type of phone jack and might look like one
pictured here. If you don’t have a modular jack, call your
local phone company to nd out how to get one installed.
Modular telephone line jack
DESKTOP INSTALLATION
1. Adjust the volume switch to the desired setting. RINGER
2. Set the switch to if you use Touch-Tone Service; PULSE/TONE TONE
Set it to if you have rotary service. PULSE
3. Set the switch (600ms, 300ms, 100ms) to the appropriateFlash time
setting.
4. Plug the coil cord into the handset, and into the telephone jack
on the bottom of the unit.
5. Plug the telephone line cord into a modular jack (RJ11C) and into
the LINE jack on the base of the unit.
6. Place the handset to base cradle.
WALL MOUNT INSTALLATION
The telephone can be mounted on a wall phone plate (not
included).
1. Rotate the wall mounting knob as the following layout.
2. Plug the line cord into the phone jack on the bottom of the unit.
3. Connect the line cord to the modular jack on the wall.
4. Place the base to the wall mount plate.
5. Plug the coil cord into the handset and into the unit, and then
hang up the phone.
USING FEATURES
MAKING A CALL
1. Lift the handset and wait for a dial tone.
2. Dial the telephone number using the keypad.
RECEIVING A CALL
Lift the handset to answer the call.
RINGER VOLUME CONTROL
Use the RINGER volume switch to adjust the volume of the ringer.
RECEIVER VOLUME CONTROL
Use the RECEIVER volume switch to adjust the RECEIVER volume level
to HI or Low during conversation.
FLASH BUTTON
Press the FLASH button to activate customer calling services such as
call waiting or call transfer, which are provided by your local phone
company.
REDIAL BUTTON
Redial the last number you called by pressing the REDIAL button after
you get a dial tone. Maximum digit of redial is 32.
TROUBLESHOOTING TIPS
PROBLEM SOLUTION
No dial tone
Can’t dial out
•
Check hook switch to make sure it pops up.
•
Make sure TONE/PULSE is set to correct position.
•
Unplug the phone, wait 30 seconds, and plug
the phone back in.
Phone doesn’t ring
•
Check phone line cord.
•
Could have too many phones on one line.
CARE AND MAINTENANCE
To keep your phone working and looking good, please follow these
guidelines:
• Avoid putting near heating appliances and devices that generate
electrical noise (for example, motors and uorescent lamps).
• DO NOT expose to direct sunlight or moisture.
• Avoid dropping and other rough treatment of the unit.
• Never use a strong cleaning agent or abrasive powder because
this will damage the nish.
• Retain the original package in case you need to return is at a later
date.
Used equipment must be disposed of in
compliance with current environmental
protection regulations. You should return it to
your reseller or dispose of it in an approved
recycling centre.
“WEEE” Weight: 0.47Kg
Wall plate
Model CE29416
00028645 (Rev.0 E/F)
09-11
Printed in China
Wall mounting: The knob is designed to keep
this unit in place when the telephone is vertical
on the wall.
Wallmounting
Knob Location Slide out Rotate 180º Replace
100
300
600
3
Use/Ring indicator
Redial button Flash button
Ringer volume switch
Receiver volume switch
5
Alcatel Logo and Alcatel name are trademarks of Alcatel and used under
license by Thomson.
CE29416
CE29416
CE29416CE29416
Ringer Volume Switch
1
P/T Switch
Flash Time Switch
100
300
600
2
3
Line cord
CE29416 E and F IB.indd 1 2008-12-23 16:30:22

Specyfikacje produktu

Marka: Alcatel
Kategoria: Telefonia stała
Model: 29416

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Alcatel 29416, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Telefonia stała Alcatel

Alcatel

Alcatel 29416 Instrukcja

2 Lipca 2024
Alcatel

Alcatel 4018 Instrukcja

2 Lipca 2024

Instrukcje Telefonia stała

Najnowsze instrukcje dla Telefonia stała

Siemens

Siemens gigaset a380 duo Instrukcja

15 Stycznia 2025
AEG

AEG d 4500 Instrukcja

15 Stycznia 2025
Auerswald

Auerswald COMfortel 500 Instrukcja

15 Stycznia 2025
Amplicomms

Amplicomms Bigtel 1202 Instrukcja

14 Stycznia 2025
Belgacom

Belgacom twist 495 Instrukcja

18 Grudnia 2024
Belgacom

Belgacom twist 308 Instrukcja

17 Grudnia 2024
Tiptel

Tiptel 286 ip Instrukcja

5 Października 2024
Loewe

Loewe alphatel 5000 de Instrukcja

5 Października 2024
ITT

ITT BIG 100 Instrukcja

28 Września 2024
ITT

ITT BIG 200 Instrukcja

28 Września 2024