Instrukcja obsługi AirLive DM-720


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AirLive DM-720 (65 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/65
Use
r
s Manual
720P IR Night Vision
PoE Dome IPCAM
DM-720
Copyright and Disclaimer
i l AirLive DM-720 User’s Manua
Copyright & Disclaimer
No part of this publication may be reproduced in any form or by any means, whether
electronic, mechanical, photocopying, or recording without the written consent of OvisLink
Corp.
OvisLink Corp. has made the best effort to ensure the accuracy of the information in this
user’s guide. However, we are not liable for the inaccuracies or errors in this guide.
Please use with caution. All information is subject to change without notice
This product contains some codes from GPL. In compliance with GPL agreement, AirLive
will publish the GPL codes on our website. Please go to www.airlive.com and go to the
"Support->GPL" menu to download source code.
All Trademarks are properties of their respective holders.
Copyright and Disclaimer
AirLive DM-720 Users Manual ii
FCC Statement
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can and, if not installed and radiate radio frequency energy
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the A
user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. For
product available in the USA/Canada market, only channel 1~11 can be operated.
Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
1. Overview
AirLive DM-720User’Manual
5
1.4 System Requirement
For normal operation and viewing of the network camera, it’s recommended that your
system meets these minimum requirements for proper operation:
Item Requirements
CPU Pentium 4 2.8GHz (or equivalent AMD)
Graphic Card 256 MB RAM graphic cards(or equivalent on-board graphic
cards)
RAM 1G
Operating
System
Windows 2000, Windows 2003, Windows XP, Windows Vista,
Windows 7, and Mac OS X Leopard
Web Browser Internet Explore 6 or later
Note: Please keep updating the latest Windows software and service package. (Ex: Net
Framework, Windows Media Player, Enhance ActiveX Security)
2. Package Contents and Installation
AirLive DM-720 Users Manual 6
2 2. Package Contents and
Installation
2.1 Package Content
A user can find the following items in the package as below:
1. AirLive DM-720 is the main element of the product.
2. Bundle CD include Setup Wizard II, CamPro Express64, Video Tutorial, Quick Start
Guide, User Manual and other tools
3. Power Adapter dedicates 12V DC electric power output to Network Camera.
4. Quick Start Guide provides important information and instructions for installing this
device.
5. Accessory Package
2.2 Hardware Overview
Inside View
2. Package Contents and Installation
AirLive DM-720User’Manual
7
LED Indicator
Steady orange means SD card is ready SD Card Orange
Flashes orange while accessing SD card.
Red Steady red for booting up process; Steady red 30
Seconds when WPS configure failed.
Blue Steady blue for booting up competition.
Purple Flash purple during firmware upgrading.
Power
Unlit When you press reset button.
Back Side View
Green Steady green for Network link. Network
Orange Flash orange while Network activity.
Reboot Press the Reset Button to reboot the camera. Reset
Reset to
Factory Default
Hold the Reset Button for 10 seconds to restore the
camera to default
2. Package Contents and Installation
AirLive DM-720 Users Manual 8
2.3 Hardware Installation
Follow these steps to install the AirLive DM-720 on your Ethernet:
A. Wall mounting and Ceiling mounting
1. Attach the alignment sticker to the wall/ceiling and drill three pilot holes into it.
2. Hammer the supplied plastic anchors into the holes.
3. Align the three holes on the base of camera with the three plastic anchors on the wall or
ceiling; insert the supplied screws to the corresponding hole and screw them.
B. Connect Cables
1. Power over Ethernet (PoE)
Using a standard RJ-45 network cable; connect the IP Camera to a PoE-enabled Hub /
Switch / Router.
2. Package Contents and Installation
AirLive DM-720User’Manual
9
2. Without Power over Ethernet (PoE) connection
Connect the power adaptor to the IP Camera. Using a standard RJ-45 network cable,
connect the IP Camera to a normal Hub / Switch / Router.
C. Adjust the view angle- 2 axis Mechanism Design
1. Turn the lens module right and left to your desired pan position.
2. Turn the lens module up and down to your desire tile position.
3. Turn the lens module to adjust the image orientation to satisfied angle.
2. Package Contents and Installation
AirLive DM-720 Users Manual 10
D. Completion
1. Clean the dome bubble to remove the dust and finger print.
2. Rotate the black shield on the dome bubble to match the camera’s position.
3. Fasten the dome cover to the base clockwise and make secure two parts reaching the
final position by checking two small dots on the side of housing.
4. Slightly adjust dome bubble to final position if needed and double check if the camera is
properly focused.
5. The installation is complete now.
2. Package Contents and Installation
AirLive DM-720User’Manual
11
2.4 Connect to IP Camera
1. Insert the bundle CD into your PC/Laptop.
2. Auto Run Screen then shows up; click “Install Software Æ Camera IP Finder Utility” to
install the configuration tool software.
2. Package Contents and Installation
AirLive DM-720 Users Manual 12
3. After completing installation, run the configuration tool software.
4. The Software scans the network and finds the IP Camera and then lists them in the
dialog box.
5. If the Cameras IP address is in the same IP segment as your LAN, select the founded IP
Camera and double click on the item. Then, the default browser will show up and connect
to the IP camera’s Web automatically.
3. Using IP Camera via Web Browser
AirLive DM-720User’Manual
13
3 3. Using IP Camera via
Web Browser
3.1 Windows Web Browser
1. Open your web browser, and enter the IP address or host name of the IP camera in the
Location / Address field of your browser.
Note: If you only want to view the video without accessing Setting screen, enter
“http://<IP>/index2.htm” as your web URL.
2. Use the default account “admin” and default password “airlive.
Note: The default user name admin and the password airliveare set at the factory for
the administrator. You can change them in the Account Menu. (Please check
“Configuration Basic Setup Account”)
3. The monitor image will be displayed in your browser. In the left side of main configuration
are “Configuration” and “Client Setting”. For more details, you can check the following
chapters.
3. Using IP Camera via Web Browser
AirLive DM-720 User’s Manual 14
3.2 Mac Web Browser
1. Click the Safari icon, and enter the IP address of the IP camera in the Location / Address
field of your browser.
Note: If you only want to view the video without Setting screen “http://<IP>/index2.htm”
as your web URL.
3. Using IP Camera via Web Browser
AirLive DM-720User’Manual
15
2. Enter the default account “admin” and default password “airlive”.
Note: The default user name is “admin” and the default password is “airlive” . You can
change them in the Account Menu (Please check “Configuration Basic Setup
Account”)
4. Operating IP Camera via Mobile Phone
AirLive DM-720 Users Manual 16
4.1 Mobile Phone Viewing
1. 3G Mobile Phone Streaming Viewing
For 3G mobile phone viewing, type “rtsp://<IP>:<PORT>/video.3gp ” into your 3G
Streaming Link. <IP> is the Public IP address of your IP camera; <PORT> is the RTSP
port of your IP camera (Default value is 554.) Example: rtsp://100.10.10.1:554/video.3gp
Note: You can also use RTSP clients (RealPlayer, VLC, QuickTime Player…etc.) to view
RTSP streaming, just type in “rtsp://<IP>:<PORT>/video.3gp” as the Player URL
2. 2.5G Mobile Phone WAP Viewing
For 2.5G mobile phone viewing, type “http://<IP>/mobile.wml” into your 2.5G WAP
Browser. <IP> is the Public IP address of your IP camera.
3. 2.5G Mobile Phone Browser Viewing
For 2.5G mobile phone viewing, type “http://<IP>/mobile.wml ” into your 2.5G Web
Browser. <IP> is the Public IP address of your IP camera.
4.2 Using IP Camera via iPhone
You can access to your IP camera via your iPhone. Please follow the setting process below.
Then you can use the Web UI via iPhone.
4 4. Operating IP Camera
via Mobile Phone
B. Type IP address in your web link.
A. Select Safari function
4. Operating IP Camera via Mobile Phone
AirLive DM-720User’Manual
17
C. Type name and password.
Default value is admin / airlive.
Then click Login In
D. The Web User Interface and
live image will show up in the
middle of screen.
Note: The image is continuous snapshots, not video. Thus, live image can’t be
recorded here.
5. Configuration of Main Menu
AirLive DM-720 User’s Manual 18
Full screen
In the left side of main configuration are Configuration and Client Settings. For more
details, please check the following Chapters.
In the right side, you can control Live View in your main Browser. The functions include
Snapshot, Open digital zoom, Audio, and Video Play.
5 5. Configuration of Main
Menu
Sna
p
shot
Video Play Audio Play Open digital zoom
5. Configuration of Main Menu
AirLive DM-720User’Manual
19
5.1 Live View
1. Snapshot
You can capture an image by clicking the camera icon and save it in the operating
computer.
Symbols Meaning
A snapshot window appears after clicking the icon.
Save the picture captured by snapshot into your computer.
Return to the view screen
full screen
2. Digital zoom in / out the image via the monitor window
A. Click to display the digital zoom in window.
B. Pull the to adjust the digital zoom range, and it
will be showed on the above window.
C. Use the left click of your mouse to move to anywhere in the window area.
3. Video play buttons
Symbols Meaning
Pause the current video stream for a moment.
Play the video stream.
Stop the current displayed video.
Record the current video stream.
Note: Concerning the recording storage requirement of your hard disk, please refer to
the APPENDIX / B. Storage Requirement Table.
5. Configuration of Main Menu
AirLive DM-720 User’s Manual 20
5.2 Configuration
This function is only for the Administrator. Click “Configurationon the home page of web
user interface to get into the Information, Basic Setup, Live View, Playback, Event and
System Settings menu.
1. Basic Settings
Click Basic Settings. There are sub-menus including Account, Network and Date Time.
For more detail information, you can refer to Chapter 6.
2. Camera Setting
Click Camera Setting. There are sub-menus including Video, Image and E-PTZ Setting.
For more detail information, you can refer to Chapter 7.
3. Playback
Click Playback. There are sub-menus including Client PC, Network Storage and Local
Storage. For more detail information, you can refer to Chapter 8.
4. Event
Click Event. There are sub-menus including Event Server, Event List, Motion Detection,
Tampering Detection and Schedule. For more detail information, you can refer to Chapter
9.
5. Configuration of Main Menu
AirLive DM-720User’Manual
21
5. System
Click System. There are sub-menus including Maintenance, Date Time, Security,
Network Basic, Network Advanced, Digital I/O, LED and System Log. For more detail
information, you can refer to Chapter 10.
6. Status
Click Information. It provides the general information of the device such as Product
Information, Security, Video Setting, Event list, Network and Port status.
5.3 Client Settings
This function is only for the client. Click this button to control Profile, View Size, Protocol,
and Video Buffer.
1. Profile
Click the drop-down menu to choose one of the five profiles for the Live View.
2. View Size
Select the desired view size of image resolution between Fit Screen and Full Screen.
3. Protocol
Select the transferring protocol among TCP, UDP, and HTTP.
4. Video Buffer
Turn the Video Buffer function On / Off. The Video Buffer function makes the streaming more
smoothly in unsteady network environment, but might cause a little delay in live viewing
6. Configuration-Basic Setup
AirLive DM-720 User’s Manual 22
6
6. Configuration-Basic
Setting
Click the Basic Setting to display the sub-menus including Account, Network and Date
Time.
6.1 Account
1. Account List
The device default account and password setting is “admin / airlive”. That means
everyone who knows IP address can access the device including all configuration. It is
necessary to create a new password if the device is intended to be accessed by specific
ones.
6. Configuration-Basic Setup
AirLive DM-720User’Manual
23
Click “Add” to create the accounts to the specific users. There are 1 default account and
9 accounts that you may assign 3 different viewer modes as you wish. The instruction of
3 viewer modes listed as below:
- Viewer: It only allows the user to access to the Live View page.
- Operator: It allows to view the Live View page, create/modify events, and adjust certain
others settings.
- Administrator: It allows the user to watch the Live View and access all configurations.
2. Anonymous Setting
There is a drop-down menu for “Anonymous viewer” to disable or enable the function.
6. Configuration-Basic Setup
AirLive DM-720 User’s Manual 24
6.2 Network
Click the Network to display the sub-menus including TCP/IP and PPPoE.
1. TCP/IP
Internet Protocol Version 4 (TCP/IPv4)
- Obtain an IP address automatically (DHCP): If a DHCP server is installed on the
network, to select this while the IP address is assigned by the DHCP server.
- Use the following IP address: Select this option when the fixed IP address is set.
z IP address: Enter the IP address of the device.
z Subnet mask: Enter the subnet mask.
z Default gateway: Enter the default gateway.
6. Configuration-Basic Setup
AirLive DM-720User’Manual
25
- Obtain DNS server address automatically: Select this to obtain the address of DNS
server automatically.
- Use the following DNS server address: Select this when you set the fixed address as
the IP address of DNS server.
z Primary DNS server: Enter the IP address of the primary DNS server.
z Secondary DNS server: Enter the IP address of the secondary DNS server,
if necessary.
HTTP
- HTTP port number: Select 80 in general situations. If you want to use a port number
other than 80, select the text box and enter a port number between 1024 and 65535.
z When you have set the HTTP port number to a number other than 80 on the
Network Setting screen in the Setup Program, access the device by typing the
IP address of the device on the web browser as follows:
Example: when HTTP port number is set to 2000 http://192.168.1.100:2000/
Note: Reboot the IP Camera after the network setting has been made.
Note: If you connect the IP Camera with your computer directly, the default
network domain of camera is 192.168.1.xx
2. PPPoE
If your ISP provides Dynamic IP with authentication by username and password, type all
PPPoE information in this part. When using the PPPoE function, you need to turn on the
DDNS or IP Notification function at the same time.
6. Configuration-Basic Setup
AirLive DM-720User’Manual
27
6.3 Date Time
The Date/ Time screen displays all options of time setting.
- Current Date / Time
It displays current time and date of IP Camera and PC that you connected, and you may
select the Date/Time format as you wish in the drop-down menu.
Note: If you would like the Date / Time information shows on the Live View screen,
please check “Camera Setting → →Video Overlay Time Stamp” and save the
setting.
- Synchronization Method
Keep current setting: Select this mode to keep the current date and time of this IP
Camera.
Synchronize with Client PC: Select this mode to keep the date and time of this IP
Camera same as the monitoring PC.
Manual setting: Select this mode to adjust manually the date and time of this IP
Camera.
Synchronize with NTP: Specify the NTP server name and click “Update now” to
synchronize the date and time of this IP Camera with those of the time server, known as
the NTP server.


Specyfikacje produktu

Marka: AirLive
Kategoria: Kamera monitorująca
Model: DM-720

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AirLive DM-720, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca AirLive

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca