Instrukcja obs艂ugi Aiptek Pencam Compact

Aiptek Aparat cyfrowy Pencam Compact

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Aiptek Pencam Compact (42 stron) w kategorii Aparat cyfrowy. Ta instrukcja by艂a pomocna dla 11 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Pobierz PDF
Strona 1/42
My digital eye!
English
PENCAM COMPACT
Installation Guide
How to Use Your Digital Camera
***Notes ***
When the batteries are unloaded, all of your stored pictures will be
lost.
Introduction
User Interface
Installing Batteries
The camera is capable of taking and storing 26 VGA(640 x 480
Pixels) images or 107 QVGA(320 x 240 Pixels) Images. These
images may be uploaded to a PC via the USB port.
The camera has two switches on it.
SW1 is the shutter switch.SW2 is the mode switch.
The LCD display is combined with SW2 to show the setting
information.
The is powered by 2 AAA batteries, or via the USB
connector when attached to a PC.
Digital Camera
Switching the camera on
Pressing the SW2 when the LCD is blank will power
on the camera. The camera will automatically
power off after 30 seconds of inactivity. The LCD
indicates the camera mode either "Lr" for low
resolution (QVGA images) or "Hr" for high
resolution(VGA images). The LCD then displays the
number of pictures you have remaining.
Taking a picture
Press the shutter button to take a picture. A high pitched beep indicates that the picture was taken
successfully and the counter will decrease accordingly. A low beep indicates insufficient light to take a
picture. A series of beeps is an indication that the camera is full.
Additional features
Pressing the mode switch repeatedly cycles through additional features as displayed on the LCD. When a
given feature is displayed it may be selected by pressing the shutter button. If an option is not selected
within 5 seconds the display will revert back to the number of available pictures.
ENGLISH
My digital eye!
View Finder
Lens
USB Port
LCD Display
Shutter Switch( )SW1
Mode Switch( )SW2
Battery Cover
Press SW2 to change features
Features are displayed
Press SW1 to select mode
(Picture remaining number)
ON
OFF
Self Timer
Pressing the mode button until "St" appears in the
LCD then pressing the shutter button will start a 10
second self-timer. The camera will issue a short
beep every second and then a longer beep. The
next beep indicates that the picture has been taken.
Note: The self-timer can not be selected when the
camera is full.
Switch mode to "St"
"St" will be displayed
Press SW1 to initiate
the self-timer mode
Switch mode to "Ct"
"Ct" will be displayed
Press SW1 to utilize
Continuous mode
Continuous mode
Pictures may be taken continuously as long as the
shutter button is pressed(and the camera is not full)
as follows:
Press the mode button until the Ct appears in the
LCD. Pressing the shutter button within 5 seconds
will cause the camera to start taking pictures for as
long as the shutter button is held down. If the shutter
button is not pressed within 5 seconds the camera
will revert back to normal picture taking. Note:
During the continuous mode the camera will allow
pictures to be taken with incorrect exposure.
Clearing the stored images
Press the mode button until CL appears on the
LCD. Pressing the shutter button once will cause
the camera to beep and the CL will start flashing .
Pressing the shutter button again within 5 seconds
will clear the camera and reset the picture counter.
Changing the picture resolution
Picture resolution may only be changed when the
camera memory is empty. If any pictures have
been taken then the memory must first be cleared.
To change resolution press the mode switch until
the resolution option is displayed, either Hr to
change to high resolution mode (if you are currently
in the low resolution mode)or Lr to change to low
resolution(if you are currently in the high resolution
mode). The camera will beep and the display will
reset to indicate the number of pictures available.
Switch mode to "CL"
"CL" will be displayed
Press SW1 to
select clear mode
LCD will start flashing
Click SW1 twice to clear
the memory
Switch mode to "Hr" or "Lr"
"Hr" or "Lr" will be displayed
Press SW1 to change resolution
ENGLISH
My digital eye!

Specyfikacje produktu

Marka: Aiptek
Kategoria: Aparat cyfrowy
Model: Pencam Compact

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Aiptek Pencam Compact, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮


Instrukcje Aparat cyfrowy Aiptek

Aiptek

Aiptek PocketCam X Instrukcja

4 Lipca 2024
Aiptek

Aiptek Pocket DV 3500 Instrukcja

3 Lipca 2024
Aiptek

Aiptek Pencam Compact Instrukcja

3 Lipca 2024
Aiptek

Aiptek mini pencam plus Instrukcja

2 Lipca 2024
Aiptek

Aiptek HDDV 8000 Instrukcja

2 Lipca 2024
Aiptek

Aiptek DV AHD Z500 Instrukcja

1 Lipca 2024
Aiptek

Aiptek pocket dv 5700 Instrukcja

30 Czerwca 2024
Aiptek

Aiptek pocket dv 6800 s Instrukcja

30 Czerwca 2024
Aiptek

Aiptek Pocket DV8900 Instrukcja

28 Czerwca 2024
Aiptek

Aiptek ahd t8 pro Instrukcja

28 Czerwca 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy

Oregon Scientific

Oregon Scientific atc 2 k Instrukcja

28 Wrze艣nia 2024
Oregon Scientific

Oregon Scientific ATC3K Action Camera Instrukcja

28 Wrze艣nia 2024
Oregon Scientific

Oregon Scientific atc 3000 atc3k action kamera Instrukcja

28 Wrze艣nia 2024
Oregon Scientific

Oregon Scientific atc 2000 action kamera Instrukcja

28 Wrze艣nia 2024
Oregon Scientific

Oregon Scientific ATCMini action camera Instrukcja

28 Wrze艣nia 2024
Oregon Scientific

Oregon Scientific ATC-2000 Instrukcja

28 Wrze艣nia 2024
General Electric

General Electric A1030 Instrukcja

28 Wrze艣nia 2024
General Electric

General Electric E1030 Instrukcja

28 Wrze艣nia 2024
General Electric

General Electric E1040 Instrukcja

28 Wrze艣nia 2024
General Electric

General Electric E1050 Instrukcja

28 Wrze艣nia 2024