Instrukcja obsługi Aiptek ahd t8 pro

Aiptek Aparat cyfrowy ahd t8 pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aiptek ahd t8 pro (58 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/58

FCC Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is

subjected to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference in residential

installations. This equipment generates, uses, and can radiate radio frequency energy, and if

not installed and used in accordance with the instructions, may cause harmful interference to

radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause interference to radio or television equipment reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Move the equipment away from the receiver.

-Plug the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/television technician for additional suggestions.

You are cautioned that any change or modications to the equipment not expressly approved

by the party responsible for compliance could void Your authority to operate such equipment.

If the time arises to throw away your product, please

recycle all the components possible.

Batteries and rechargeable batteries are not to be

disposed in your domestic waste! Please recycle

them at your local recycling point.

Together we can help to protect the environment.

Welcome:

Dear user, thank you for purchasing this product.

Much investment in time and effort has gone into its development, and it is our hope

that it will give you many years of trouble-free service.

Safety Notice:

1. Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided.

2. Avoid all contact with water, and dry hands before using.

3. Do not expose the camcorder to high temperature or leave it in direct sunlight. Doing so may

damage the camcorder.

4. Use the camcorder with care. Avoid pressing hard on the camcorder body.

5. For your own safety, avoid using the camcorder when there is a storm or lightning.

6. Do not use batteries of different specications. Doing so may lead to the potential for serious

damage.

7. Remove the battery during long periods between usage, as a deteriorated battery may affect

the functionality of the camcorder.

8. Remove the battery if it shows signs of leaking or distortion.

9. Use only the accessories supplied by the manufacturer.

10. Keep the camcorder out of the reach of infants.

11. Risk of explosion if battery is replaced by an incorrect type.

12. Dispose of used batteries according to the instructions.

Preparing the Camcorder

Product overview

Playback

As Joystck -

Up: Icon

Down: Video resolution

Left: Flash

Right: Menu

Record

Delete

Connector cover

Shutter

HDMI outputTV-out /

earphone

connector

Tripod socket

SD card slot

Power

SpeakerLCD display

Zoom out/Volume down

Zoom in/Volume up

Battery cover

Wrist strap

holder (back)

USB connector

Wrist strap

holder (front)

Lens

Flash strobe

Microphone

LED indicator

Focus switch

1 Detach the USB connector as indicated,

and then unfasten the battery cover to

remove the cover.

2 Place the accessory Li-Ion battery into

the compartment. Note that the metallic

contacts must be aligned with the

contacts in the compartment.

3 Replace the cover.

When using for the rst time, please fully charge the battery for

at least 8 hours.

Getting Started

Loading the battery 1 Lift the memory card cover to open it as indicated.

2 Insert the card as the direction of indication until it

reaches the end of the slot.

3 When the card is inserted successfully, the icon ( ) will

appear on screen. To remove the card, push the card to

release it and then pull it out gently.

4 Put the cover back.

1 Detach the USB connector and plug it into a USB port on a powered PC. Make

sure the camcorder is powered off.

2 The charging LED turns red and the charge starts.

3 When the charging is interrupted or the battery pack is fully charged, the charging

LED will turn off.

When using a PC to charge the battery:

1) Do not power on the camcorder or the

charge will stop.

2) If necessary, use a USB extension

cable to extend the connection.

Charging the battery

If the power is not turned on after you have completed the above procedures, please

check the following have been done correctly: 1) The battery is correctly loaded; 2) The

loaded battery has enough power.

Please choose your local language before starting using the camcorder.

Icon Description

Full battery life

Moderate battery life

Low battery life

* The ash strobe will be disabled.

Empty battery life

Note: To avoid sudden outage of power supply, you are recommended to replace the

battery when the icon indicates low battery life.

Specyfikacje produktu

Marka:	Aiptek
Kategoria:	Aparat cyfrowy
Model:	ahd t8 pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aiptek ahd t8 pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Aparat cyfrowy Aiptek

Aiptek PocketCam X Instrukcja

4 Lipca 2024

Aiptek Pocket DV 3500 Instrukcja

3 Lipca 2024

Aiptek Pencam Compact Instrukcja

3 Lipca 2024

Aiptek mini pencam plus Instrukcja

2 Lipca 2024

Aiptek HDDV 8000 Instrukcja

2 Lipca 2024

Aiptek DV AHD Z500 Instrukcja

1 Lipca 2024

Aiptek pocket dv 5700 Instrukcja

30 Czerwca 2024

Aiptek pocket dv 6800 s Instrukcja

30 Czerwca 2024

Aiptek Pocket DV8900 Instrukcja

28 Czerwca 2024

Aiptek ahd t8 pro Instrukcja

28 Czerwca 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy

Oregon Scientific atc 2 k Instrukcja

28 Września 2024

Oregon Scientific ATC3K Action Camera Instrukcja

28 Września 2024

Oregon Scientific atc 3000 atc3k action kamera Instrukcja

28 Września 2024

Oregon Scientific atc 2000 action kamera Instrukcja

28 Września 2024

Oregon Scientific ATCMini action camera Instrukcja

28 Września 2024

Oregon Scientific ATC-2000 Instrukcja

28 Września 2024

General Electric A1030 Instrukcja

28 Września 2024

General Electric E1030 Instrukcja

28 Września 2024

General Electric E1040 Instrukcja

28 Września 2024

General Electric E1050 Instrukcja

28 Września 2024