Instrukcja obsługi Aiphone NI-BA


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Aiphone NI-BA (32 stron) w kategorii inteligentny dom. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/32
NIM system
INSTALLATION MANUAL
APPENDIXMOUNTING CONNECTIONGETTING STARTED SETUP AFTER
INSTALLATION
Thank you for selecting Aiphone for your communication needs. Please read this manual carefully before installation, and keep it
in a safe place for future reference.
Please note that images and illustrations depicted in this manual may differ from the actual product.
The illustration shows the *
Master station, 40-call
(NIM-40B).
2
Contents
Introduction ................................ 3
Precautions ................................. 3
WARNING ........................................... 3
CAUTION ............................................ 3
GENERAL PRECAUTIONS ............... 3
NOTICES ............................................ 4
System requirements for PC ............ 5
GETTING STARTED ....................... 6
System con guration ................ 6
Package contents and
dimensions ................................. 8
Master station .................................... 8
Sub station, call button, wall jack ... 8
Ceiling speaker,
ceiling microphone ..........................11
Corridor light, reset button .............11
Software ........................................... 13
MOUNTING .................................. 14
CONNECTION ............................... 18
Connection wiring diagram
(outline) ..................................... 18
Handling cables ........................ 20
Notes about handling cables ......... 20
Connection wiring diagram
(details) ..................................... 21
Connecting to the master station .. 21
Multiple-user room examples of
using the ceiling speaker (NI-LB)
and the ceiling microphone
(NI-SB) .............................................. 22
Multiple-user room examples of
using the ceiling speaker (NI-LB)
and not using the ceiling
microphone (NI-SB) ........................ 23
Multiple-user room examples of
using the bedside handheld sub
stations (NI-RC) etc. ........................ 24
Examples of using the bathroom
call buttons
(NIR-7W or NIR-7HW) ...................... 26
Single room examples of using
the surface mount sub station
(NI-BA) .............................................. 27
Examples of using the ush
mount sub station (NI-JA) .............. 28
Notes about connecting to
a corridor light with nameplate
(NIR-31, NIR-32, NIR-34) ................. 29
SETUP AFTER INSTALLATION ... 30
Adjusting volume and
ringtone settings ...................... 30
APPENDIX ..................................... 31
Troubleshooting ....................... 31
Warranty ..................... Back cover
3
Precautions
Prohibited
Do not dismantle unit
Keep unit away from water
Be sure to follow the instruction
WARNING
Negligence could result in death or serious injury.
1. Do not dismantle or alter the unit. Fire or electric shock could
result.
2. Keep the unit away from water or any other liquid.
Fire or electric shock could result.
3. High voltage is present internally. Do not open the case.
Electric shock could result.
4. For power supply, use Aiphone power supply model speci ed
for use with system. If non-speci ed product is used, re or
malfunction could result.
5. Do not connect any non-speci ed power source to the +, -
terminals. Also, do not install two power supplies in parallel to a
single input. Fire or damage to the unit could result.
6. Do not connect any terminal on the unit to an AC power line.
Fire or electric shock could result.
7. Keep AC cord from being marred or crushed. If the AC cord is
damaged, re or electric shock could result.
8.
Do not plug or unplug unit with wet hands. Electric shock could
result.
9. Insert AC plug completely and securely into AC outlet.
Otherwise, re or electric shock could result.
10.
Periodically check for and remove dust on the power plug. If
dust is left, it could cause the power plug to heat up, resulting in
re.
11.
Do not put any metal or ammable material into the unit through
the openings. Fire, electric shock, or unit trouble could result.
CAUTION
Negligence could result in injury to people or damage to property.
1.
Do not install or make any wire terminations while power supply
is plugged in. It can cause electrical shock or damage to the unit.
2. When mounting the unit on a wall, install the unit in a
convenient location, but not where it could be jarred or
bumped. Injury could result.
3. Before turning on power, make sure wires are not crossed or
shorted. If not, re or electric shock could result.
4.
Do not place or install the unit in the locations subject to frequent
vibration or impact. If the unit falls, injury to people or damage to
the unit could result.
5. Do not put anything on the unit or cover the unit with cloth, etc.
Fire or unit trouble could result.
6. Do not install the unit in any of the following locations. Fire,
electric shock, or unit trouble could result.
Places under direct sunlight or near heating equipment that *
varies in temperature.
Places subject to dust, oil, chemicals, hydrogen sul de (hot *
spring).
Places subject to moisture and humidity extremes, such as *
bathrooms, cellars, greenhouses, etc.
Places where the temperature is quite low, such as inside a *
refrigerated area or in front of an air conditioner.
Places subject to steam or smoke (near heating or cooking *
surfaces).
Where noise generating devices such as dimmer switches or *
inverter electrical appliances are closeby.
Locations subject to frequent vibration or impact.*
Locations subject to extremely powerful electric elds.*
7. Be sure to perform a call test or check the chime volume with
the handset on the hook. If you operate the hook switch with
the handset on your ear, a sudden call etc. may cause damage
to your ear.
8. The unit must be installed and wired by a quali ed technician.
GENERAL PRECAUTIONS
1. Keep the unit more than 1 m (3.3') away from radio or TV sets.
2. Keep the intercom wires more than 30cm (12'') away from AC
100-240V wiring. AC induced noise and/or unit malfunction could
result.
3. Comply with all third party manufacturing speci cations that will be
used with this system.
4. If it is used close to a cellular phone, the unit may malfunction.
5. The unit can be damaged if dropped. Handle with care.
6. The unit will not work during power failure.
7. In areas where broadcasting station antennas are close by, the
intercom system may be affected by radio frequency interference.
8. All the units, except for Sub station, ush mount (NI-JA), are
designed for indoor use only. Do not use at outdoor locations.
9. Environmental sound around the unit may hinder clear
communication, but this is not a malfunction.
10. Using a mobile phone or professional-use radio equipment such
as walkie-talkie close to the system may cause a malfunction.
Introduction
The NIM system is a communication system designed for applications in facilities such as hospitals, of ce buildings, factories,
schools, and prisons. Various types of equipment enable you to con gure a system that meets your needs for not only general
purpose internal communications, but also for calling and communication in health care or various commercial applications. This
system also allows you to check the call history by connecting a PC installed with the speci ed application software.
The NIM system is telecommunication equipment, not to be used as Medical Equipment.


Specyfikacje produktu

Marka: Aiphone
Kategoria: inteligentny dom
Model: NI-BA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Aiphone NI-BA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje inteligentny dom Aiphone

Aiphone

Aiphone NI-BA Instrukcja

1 Września 2024

Instrukcje inteligentny dom

Najnowsze instrukcje dla inteligentny dom