Instrukcja obsługi Adj VPar Pak

Adj Ulga VPar Pak

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adj VPar Pak (12 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

User Instructions

6/14

VPar Pak

VPar Pak Specifications

Model: VPar Pak

Voltage: 100V ~ 240V/50~60Hz

LEDs: 5 x 4W 4-in-1 LED’s

Beam Angle: 40 Degrees

Working Position: Any safe working position

Power Draw: 21W

Power Cord Daisy Chain: 30 Fixtures Max.

Fuse: 2 Amp

Fixture Weight: 3 lbs./ 1.2Kgs.

System Weight: 7 lbs. / 3 Kgs.

Fixture Dimensions: 9” (L) x 8.75” (W) x 9.5” (H)

225 x 220 x 85mm

VPar Bag Dimensions: 9” (L) x 8.75” (W) x 9.5” (H)

225 x 200 x 240mm

Colors: RGBA Color Mixing

DMX Channels: 8 DMX Modes: 1 Channel Mode,

2 Channel Mode, 3 Channel Mode,

4 Channel Mode, 5 Channel Mode,

6 Channel Mode, 7 Channel Mode, &

8 Channel Mode

Warranty: 2 Year (730 days) Limited Warranty

Please Note: Specications and improvements in the design of this

unit and this manual are subject to change without any prior written

notice.

Auto Sensing Voltage: This xture contains a automatic voltage

switch, which will auto sense the voltage when it is plugged into the

power source.

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.adj.com / E-mail: info@adj.com

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

service@adjgroup.eu / www.adj.com

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

specications, diagrams, images, and instructions herein are

subject to change without notice. ADJ Products, LLC logo and

identifying product names and numbers herein are trademarks

of ADJ Products, LLC. Copyright protection claimed includes all

forms and matters of copyrightable materials and information

now allowed by statutory or judicial law or hereinafter granted.

Product names used in this document may be trademarks or

registered trademarks of their respective companies and are

hereby acknowledged. All non-ADJ Products, LLC brands and

product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all aliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and

electrical damages, injuries to any persons, and direct or indi-

rect economic loss associated with the use or reliance of any

information contained within this document, and/or as a result

of the improper, unsafe, unsucient and negligent assembly,

installation, rigging, and operation of this product.

Europe Energy Saving Notice

Energy Saving Matters (EuP 2009/125/EC)

Saving electric energy is a key to help protecting the enviroment.

Please turn o all electrical products when they are not in use. To

avoid power consumption in idle mode, disconnect all electrical

equipment from power when not in use. Thank you! ADJ Products, LLC - www.adj.com - VPar Pak User Manual Page 22

VPar Pak Warranty

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products

to be free of manufacturing defects in material and workmanship for a prescribed period from

the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the

product is purchased within the United States of America, including possessions and

territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable

evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authorization number (RA#) before sending back the

product–please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product

only to the ADJ Products, LLC factory. All shipping charges must be pre-paid. If the requested repairs or

service (including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay

return shipping charges only to a designated point within the United States. If the entire instrument is

sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If

any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for

loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any

manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the

product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior

written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because

not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check

up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense

with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by

reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this

warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole

discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August

15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products

without any obligation to include these changes in any products theretofore manufactured.

No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with

products described above. Except to the extent prohibited by applicable law, all implied warranties made

by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,

are limited in duration to the warranty period set forth above. And no warranties, whether expressed or

implied, including warranties of merchantability or fitness, shall apply to this product after said period

has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is

expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or

damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and

supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore

published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

 •LightingProducts=1-year(365days)LimitedWarranty(Such as: Special Effect Lighting, Intelligent

Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing,

Lighting Stands etc. excluding LED and lamps)

 •LaserProducts=90-DayLimitedWarranty

 •L.E.D.Products=2-year(730days)LimitedWarranty(excluding motors, PCB boards, and power

supplies, which have a 1-year (365 day Limited Warranty) and batteries which have a 180 day

limited warranty).

ADJ Products, LLC - www.adj.com - VPar Pak User Manual Page 2

VPar Pak Introduction

Unpacking: Thank you for purchasing the VPar Pak by ADJ Products,

LLC. Every VPar Pak has been thoroughly tested and has been shipped

in perfect operating condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears

to be damaged, carefully inspect your xture for any damage and be

sure all accessories necessary to operate the unit has arrived intact. In

the case damage has been found or parts are missing, please contact

our toll free customer support number for further instructions. Do not

return this unit to your dealer without rst contacting customer sup-

port.

Introduction: The ADJ This VPar is a DMX intelligent, LED par fixture.

xture can be used in a stand alone mode or connected in a Master/

Slave conguration. This wash has five operating modes: Sound Active

mode, Auto Run mode, RGBA Dimmer mode, Static Color mode, and

DMX control.

Customer Support: ADJ Products, LLC provides a customer support

line, to provide set up help and to answer any question should you

encounter problems during your set up or initial operation. You may

also visit us on the web at www.adj.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m.

Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@adj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

ADJ Products, LLC - www.adj.com - VPar Pak User Manual Page 21

VPar Pak Trouble Shooting

Listed below are a few common problems the user may encounter,

with solutions.

Unit not responding to DMX:

1. Check that the DMX cables are connected properly and are

wired correctly (pin 3 is “hot”; on some other DMX devices

pin 2 may be ‘hot’). Also, check that all cables are connected

to the right connectors; it does matter which way the inputs

and outputs are connected.

Unit does not respond to sound:

1. Quiet or high pitched sounds will not activate the unit.

2. Make sure that Sound Active mode is activated.

VPar Pak Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter-

nal optical lenses must be carried out periodically to optimize light

output.

1. Use normal glass cleaner and a soft cloth to wipe down the

outside casing.

2. Clean the external optics with glass cleaner and a soft cloth

every 20 days.

3. Always be sure to dry all parts completely before plugging

the unit back in.

Cleaning frequency depends on the environment in which the fixture

operates (i.e. smoke, fog residue, dust, dew).

Disconnect the unit from its power source. Remove the power cord

from the unit. Once the cord has been removed, you will find that the

fuse holder is located inside the power socket. Insert a flat-head screw

driver into the power socket and gently pry out the fuse holder. Remove

the bad fuse and replace with a new one. The fuse holder also has a

holder for a spare fuse.

VPar Pak Fuse Replacement

With this feature you can connect the xtures to one another

using the IEC input and output sockets. The quantity that can be

connected is 30 xtures maximum. After 30 xtures you will need

to use a new power outlet. They must be the same xtures. DO

NOT mix xtures.

VPar Pak Power Cord Daisy Chain

Specyfikacje produktu

Marka:	Adj
Kategoria:	Ulga
Model:	VPar Pak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adj VPar Pak, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Ulga Adj

Adj Mega TRI Bar Instrukcja

5 Września 2024

Adj Stinger II Instrukcja

4 Września 2024

Adj Ikon Profile Instrukcja

3 Września 2024

Adj Ultra HEX Bar 6 Instrukcja

2 Września 2024

Adj VPar Pak Instrukcja

5 Lipca 2024

Adj Encore Profile Instrukcja

3 Lipca 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay 30780 Instrukcja

15 Października 2024

QTX DM-X12 Instrukcja

15 Października 2024

Livarno IAN 94799 Instrukcja

15 Października 2024

Astro Denia Instrukcja

13 Października 2024

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024

Neewer TL97C Instrukcja

9 Października 2024

Neewer SRP18C Instrukcja

9 Października 2024

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024