Instrukcja obsługi ADE BS-H

ADE nieskategoryzowany BS-H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ADE BS-H (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
OPERATING
INSTRUCTIONS
Bun cutting machine
Bun cutting machine
BS-H
BS-H- -Rev001-230404 UM- en
1 -H- -Rev001-BS 230404 UM- en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
1.1 Introduction ............................................................................................................................ 2
1.2 Intended use .......................................................................................................................... 2
1.3 Residual risks ........................................................................................................................ 3
2. MACHINE OVERVIEW .......................................................................................................... 3
3. INSTALLATION AND START- UP .......................................................................................... 4
3.1 Scope of Supply .................................................................................................................... 4
3.2 Setting up the machine .......................................................................................................... 4
3.3 Connecting to the power supply ............................................................................................. 5
3.4 Electrical safety devices 5 .........................................................................................................
3.5 Mechanical safety devices ..................................................................................................... 5
3.6 Safety precautions ................................................................................................................. 6
3.7 Acceptance testing ................................................................................................................ 6
4. USING THE BUN CUTTING MACHINE ................................................................................. 7
4.1 Switching on .......................................................................................................................... 7
4.2 Switching o .......................................................................................................................... 7
4.3 Securing the machine against accidental switch- on............................................................... 7
4.4 Feeding in food and cutting .................................................................................................... 7
5. CLEANING ............................................................................................................................ 7
6. CHANGING THE BLADE ....................................................................................................... 8
7. TRAINING ............................................................................................................................. 8
8. DISPOSAL 8............................................................................................................................
9. WARRANTY .......................................................................................................................... 9
10. TECHNICAL DATA ................................................................................................................ 9
11. DECLARATION OF CONFORMITY .................................................................................... 10
12. DIAGRAMS ......................................................................................................................... 11
12.1 -H- BS 230............................................................................................................................. 11
12.2 -H- BS 400............................................................................................................................. 12
13. EXPLODED VIEWS ............................................................................................................. 13
BS-H- -Rev001-230404 UM- 2 en
1. FOREWORD
This symbol means: “Observe operating instructions.” Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This manual has been written to comply with the Machinery Directive as amended.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is tted to assure maximum eciency throughout its service life.
The bun cutting machines may be updated; this eventuality shall not prejudice the instructions and
explanations contained in the manual.
Before starting up the bun cutting machine, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insucient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
1.1 Introduction
The bun cutting machines have been designed to comply with applicable safety standards.
Consequently, all our bun cutting machines are fitted with a plate featuring the “CE” mark attesting
to the product's conformity with said provisions.
1.2 Intended use
The bun cutting machine is intended for cutting ready-baked buns, small baguettes, croissants, or
similar baked goods in large quantities.
The bun is inserted through the feed opening at the top end of the machine and then slides
automatically past a circular blade that cuts through the bun entirely or in parts. After being (partially)
cut, the bun falls out at the bottom end and lands in a corresponding collection container (not part of
the machine).
Use the adjustment knobs on the machine housing to change the position of the cut by altering the
blade's height and width without any tools. The machine's working speed is up to 2,000 buns per
hour.
An automatic shut-o when opening the housing, tamper protection at the top and bottom, and an
inspection window made of plexiglass ensure safety and easy monitoring of the cutting process.
Use the bun cutting machine exclusively as it was designed to be used.
Failure to observe the safety instructions may result in severe damage to the
machine and cause the warranty to become void.
The machine may only be used in its original condition and with original parts. It is strictly forbidden
to dismantle the safety devices. Should any safety devices be damaged, immediately shut down the
machine and contact ADE for repair or replacement.

Specyfikacje produktu

Marka: ADE
Kategoria: nieskategoryzowany
Model: BS-H

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ADE BS-H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany ADE

ADE

ADE KT101 Instrukcja

25 Września 2024
ADE

ADE BS-H Instrukcja

25 Września 2024
ADE

ADE KT102 Instrukcja

25 Września 2024
ADE

ADE Twister-210607 Instrukcja

4 Lipca 2024
ADE

ADE Rotomat-V-230609 Instrukcja

4 Lipca 2024
ADE

ADE VitalisPro-210614 Instrukcja

4 Lipca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024