Instrukcja obsługi Adder CCUSB-5M

Adder Kable do komputerów PC i urządzeń peryferyjnych CCUSB-5M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adder CCUSB-5M (2 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Your USB converter cable package

In addition to this brief guide, your package should contain the converter cable:

Adder Technology Limited,

Technology House,

Trafalgar Way,

Cambridge, CB3 8SQ,

United Kingdom

Tel: +44 (0)1954 780044

Fax: +44 (0)1954 780081

USB Converter Cable

User Guide

Email: support@adder.com

Web: www.adder.com

All trademarks are acknowledged.

Adder Corporation,

29 Water Street,

Newburyport,

MA 01950,

United States of America

Tel: +1-888-932-3337

Fax: +1-888-275-1117

USB converter

cable

KVM Switch end

Keyboard, video and

mouse connectors

Computer end

Video and USB

connectors

Circuitry shell

This moulding contains

all of the signal

conversion circuitry

Note: The USB section of

the cable is shortest so

that you may use it, if

necessary, in conjunction

with an extra extension

cable. The total length of a

USB connection should be

no more than 5m.

Your warranty

Adder Technology Ltd warrants that this product shall be free from defects in workmanship and

materials for a period of two years from the date of original purchase. If the product should fail to

operate correctly in normal use during the warranty period, Adder will replace or repair it free of

charge. No liability can be accepted for damage due to misuse or circumstances outside Adder’s

control. Also, Adder will not be responsible for any loss, damage or injury arising directly or indirectly

from the use of this product. Adder’s total liability under the terms of this warranty shall in all

circumstances be limited to the replacement value of this product.

Regulatory information

European EMC directive 89/336/EEC

This equipment has been tested and found to comply with the limits for a class B computing device in

accordance with the specifications in the European standard EN55022. These limits are designed to

provide reasonable protection against harmful interference. This equipment generates, uses and can

radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful

interference to radio or television reception. However, there is no guarantee that harmful interference will not occur

in a particular installation. If this equipment does cause interference to radio or television reception, which can be

determined by turning the equipment on and off, the user is encouraged to correct the interference with one or

more of the following measures: (a) Reorient or relocate the receiving antenna. (b) Increase the separation between

the equipment and the receiver. (c) Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected. (d) Consult the supplier or an experienced radio/TV technician for help.

FCC statement

This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is,

in strict accordance with the manufacturer’s instructions, may cause interference to radio communications. It has

been tested and found to comply with the limits for a Class A computing device in accordance with the

specifications in Subpart J of part 15 of FCC rules, which are designed to provide reasonable protection such

interference when the equipment is operated in a commercial environment. Operation of this equipment in a

residential area may cause interference, in which case the user at his own expense will be required to take whatever

measures may be necessary to correct the interference. Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

Connecting your USB converter cable

Your USB converter cable is primarily designed for use with a USB-equipped computer and a

traditional Keyboard, Video and Mouse (KVM) switch unit.

Note: It is technically possible to connect your PS/2-style keyboard, PS/2-style mouse and

monitor directly to the converter cable. However, you would first need to purchase separate

gender changers for the PS/2 keyboard and mouse connectors and possibly one also for the

video connector.

Connector/port icons & colours

Monitor (video) Dark blue

Keyboard Purple

Mouse or Mid green

USB Black

Important information

• For use in dry, oil free indoor environments only.

• Your USB converter cable contains no user-serviceable parts.

• For connection only to the following standard computer system and KVM switch connectors:

PS/2 style keyboard and mouse, SVGA analogue video connections and USB ports.

Software upgrades and keyboard emulations

The software within your USB converter cable can emulate keyboards for various computers

without modification. When used in conjunction with Adder MP-type KVM switches it can

support PC, Apple and Sun systems as standard. When used in conjunction with other

Adder or non-Adder switches, your USB converter cable supports PC and Apple systems as

standard and Sun systems by means of downloading a Sun driver into the cable.

The Sun driver as well as other specialist keyboard emulators and general software

upgrades are available within the Support section of the Adder Technology website -

www.adder.com. Full instructions for performing an upgrade/keyboard emulation are

included with the files from the website.

Keypress equivalents

The tables below provide equivalent keypresses on a standard PC (PS/2-style) keyboard that

emulate special keys found on Apple®, Microsoft® or Sun® keyboards.

3 At the other end of the converter cable (with

two plugs), connect the video and USB plugs

to the relevant sockets on your computer.

4 Switch on your computer(s) and KVM switch,

and operate in the usual manner.

Your USB converter cable emulates the

presence of a keyboard and mouse (via the

USB connector) to the computer at all times.

This means that there will be no delay in

response when switching to this channel.

KVM switch

USB-

equipped

Mouse and Keyboard

connectors

Video

connector

Video

connector

USB

connector

To connect your USB converter cable

1 If possible, switch off your

computer(s) and KVM switch.

2 At the end of the converter cable

that has three plugs, connect the

keyboard, mouse and video plugs to

the relevant sockets on your KVM

switch.

* Certain PS/2 keyboards have a power key which will be

mapped to perform the same function for a Sun system.

PS/2 keyboard Apple keyboard

Left Ctrl Left Control

Left Win Start ( ) Left Command ( )

Left Alt Left Option (alt)

Right Alt or Alt Graph Right Option (alt)

Right Win Start ( ) Right Command ( )

Right Ctrl Right Control

Windows Application key No equivalent

No equivalent On / off key

PS/2 keyboard Sun keyboard

Right-[Ctrl] [F1] Stop

Right-[Ctrl] [F2] Again

Right-[Ctrl] [F3] Props

Right-[Ctrl] [F4] Undo

Right-[Ctrl] [F5] Front

Right-[Ctrl] [F6] Copy

Right-[Ctrl] [F7] Open

Right-[Ctrl] [F8] Paste

Right-[Ctrl] [F9] Find

Right-[Ctrl] [F10] Cut

Right-[Ctrl] [1] Mute

Right-[Ctrl] [2] Volume -

Right-[Ctrl] [3] Volume +

Right-[Ctrl] [4] Power*

Right-[Ctrl] [H] Help

When used with Sun® workstations, your USB

converter needs to report a keyboard country

code to the host computer. Further details

about this feature are provided in the upgrade

notes available from www.adder.com.

Specyfikacje produktu

Marka:	Adder
Kategoria:	Kable do komputerów PC i urządzeń peryferyjnych
Model:	CCUSB-5M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adder CCUSB-5M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych Adder

Adder CCUSB-5M Instrukcja

4 Października 2024

Adder CCSUN Instrukcja

4 Października 2024

Adder CCSUN-5M Instrukcja

4 Października 2024

Adder CCUSB-10M Instrukcja

4 Października 2024

Adder View DDX CAM Instrukcja

4 Października 2024

Adder CCSUN-10M Instrukcja

4 Października 2024

Adder CCP2U Instrukcja

4 Października 2024

Adder CCUSB Instrukcja

4 Października 2024

Instrukcje Kable do komputerów PC i urządzeń peryferyjnych

Najnowsze instrukcje dla Kable do komputerów PC i urządzeń peryferyjnych

Goobay 68874 Instrukcja

9 Października 2024

Goobay 61259 Instrukcja

9 Października 2024

Kogan KAHBCSPLT4A Instrukcja

9 Października 2024

Laserliner PersonalCable Instrukcja

9 Października 2024

StarTech.com USBAUB1MBK Instrukcja

9 Października 2024

StarTech.com USBAUB3MBK Instrukcja

9 Października 2024

StarTech.com USBAUB2MBK Instrukcja

9 Października 2024

StarTech.com CRJ4550PK Instrukcja

9 Października 2024

StarTech.com CRJ45C6STR50 Instrukcja

9 Października 2024

StarTech.com ST8CU824 Instrukcja

9 Października 2024