Instrukcja obsługi Adastra AD-100


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Adastra AD-100 (6 stron) w kategorii Tuner audio. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
AD- 100
1U DAB/FM Tuner
Item ref: 2.979 95 UK
User Manual
952.979UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the Adastra AD-100 DAB/FM Tuner as part of your public address system.
This unit can receive either Digital Audio Broadcast or analogue FM radio stations for background
music and events coverage. Please read this manual fully and follow the instructions to achieve the
best results with your new purchase and to avoid damage through misuse.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the casing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case
No user serviceable parts inside Do not open the case refer all servicing to qualified service – –
personnel.
Safety
Check for correct mains voltage and condition of IEC lead before connecting to power outlet
Placement
Keep out of direct sunlight and away from heat sources
Keep away from damp or dusty environments
For rack-mounting, ensure adequate support for the weight of the unit
Ensure adequate air-flow and do not cover cooling vents at the front and rear of the amplifier
Ensure adequate access to controls and connections
Where reception is poor, connect an outdoor aerial in place of the rear antenna on F connector.
Cleaning
Use a soft cloth with a neutral detergent to clean the casing as required
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
Do not use strong solvents for cleaning the unit
952.979UK User Manual
Front panel
Rear panel
1.
Power switch
Rocker switch for main power on/off
2.
Preset memory buttons
Press to access programmed stations
3.
SHIFT
Press to jump preset by 10, press and hold for FM scan list
4.
MUTE
Press to mute output, press again to un-mute
5.
LCD display
Shows frequency and/or station information
6.
MODE
Toggles between DAB and FM modes
7.
Remote sensor
Receives control signal from the handheld remote
8.
DOWN
Press to manually tune to lower channels, press and hold to auto-scan
9.
MENU
Changes menu options for on-screen editing
10.
UP
Press to manually tune to higher channels, press and hold to auto-scan
11.
INFO
In FM mode, changes RDS options. In DAB mode, changes LCD display
12.
ENTER
Press to confirm selection
13.
SLEEP
Press to enter sleep mode and then use UP/DOWN keys to set sleep time
14.
FM LIST
Press to display the list of FM stations scanned
15.
Rotary tuner
Rotate to manually tune stations, press to select, hold for auto-scan
16.
Antenna
17.
Output R + L
18.
Mains inlet


Specyfikacje produktu

Marka: Adastra
Kategoria: Tuner audio
Model: AD-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Adastra AD-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą