Instrukcja obsługi Acti PMON-2000

Acti monitor PMON-2000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acti PMON-2000 (4 stron) w kategorii monitor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

After mounting an IP camera, use the

Camera Installation Kit to power up the

camera via Power-over-Ethernet (PoE).

1. Switch the device then press POWER On

and hold for 3 seconds.

After the device boot up process, the main menu screen appears. Tap the screen with

the bundled stylus or use the to move through the menu.Navigation Keys

1. Tap to use the device power to power on the camera. PoE ON

This button turns to to indicate PoE is already enabled.

2. Tap .IP Camera

3. Tap .Connect

The camera Live View appears. The functions displayed on the screen may vary

depending on the type of camera connected.

• To adjust focus manually, press or . Or, to set to auto focus, press and at

the same time.

• To zoom image in our out one step at a time, press or .

• To zoom to maximum zoom view, tap Zoom .

• When zoomed, tap Z & F to switch to Pan & Tilt mode.

• In P & T mode, press or to pan and tilt the view.

• Tap REC to start or stop recording. REC indicates recording is in progress.

Zoom Cameras

Fixed or Vari-focal Cameras

• To zoom to maximum digital zoom view, tap Zoom .

• In P & T mode, press or to pan and tilt the view.

• Tap REC to start or stop recording. REC indicates recording is in progress.

Speed Dome Cameras

• To zoom image in our out one step at a time,

press or .

• To zoom to maximum zoom view, tap Zoom .

• To pan and tilt the view, press or .

• Tap REC to start or stop recording. REC

indicates recording is in progress.

To view the camera Live View screen, perform the following:

IMPORTANT: To ensure optimum performance of cameras needing more than 6W

power, it is recommended to connect the device to either one of the following:

• Connect the device to an external power outlet using the DC 12V power adapter.

• Connect a PoE switch or injector to the port of the Camera Installation LAN / PSE IN

Kit and switch on . Refer to the Product Manual downloadable from the Power Bank

website for detailed instructions.

Power Bank Switch

Power Switch

The boot up process may take a while to complete.Note:

2. Make sure the switch is .Power Bank Off

3. Connect one end of the network cable to the camera and

the other end to the port of the device.LAN / POE OUT

Quick Installation Guide

V.2015.04.08

CAMERA INSTALLATION KIT

Step 5: Connect the Camera

Step 6: View the Camera

Step 7: Operate the Device

1. Switch the device power to ON.

2. Press and hold the Power

Key for at least 3 seconds.

Forrst-timeuse,theTouch Calibration screen appears. Using the stylus, follow the

on-screen instructions to complete the calibration.

The Power Indicator LED lights up.

Note: The boot up process may take a while to complete.

For protection and convenience of use, you may use the rubber casing for easy-grip

or the carrying bag to protect and carry the device wherever you go.

To place the device in the carrying bag, peform the following:

1 Power Indicator LED

2 Data Indicator LED

3 LCD Screen

4 Navigation Keys

5 ESC Key

6 Power / Snapshot /

Enter Key

7 Serial Port Connector

8 DC 12V Power Connector

9 Ethernet Cable Tester Port

Battery Charging

Indicator LED

Power Switch

Audio Output Jack

Audio Input Jack

Front Side Right Side

1213

Back Side Left Side

14 15

Stylus

BNC Connector

Battery Compartment

USB Port

Memory Card Slot

LAN Port / PoE Output

LAN Port / PSE Input

This guide contains all the information you need to quickly setup the Camera

Installation Kit. For detailed information on installations or operations, please refer to

the Product Manual downloadable from the website.

Check if the package comes with the following items:

Camera Installation

Kit

Power Cord Universal Power Adapter

Converter

Li-ion Battery

Rubber Case Carrying Bag Neck Strap Sunshield Terminal Block

Network Cable BNC Cable Ethernet

Terminal Block

1. Open the battery compartment cover.

2. Insert the battery.

Quick Installation

Guide

3. Close the battery compartment cover.

4. Connect the power cord and adapter to the device.

5. Plug the power adapter to a power outlet.

1. Insert the outer edge velcro through

the bottom slot of the device.

2. Insert the inner edge velcro through

the top slot of the device.

3. Attach the sunshield.

4. Close the bag and attach the neck

strap.

Notes:

• Use only the power adapter that is bundled with the device or approved by the manufacturer.

• When unplugging the power cord, pull on the plug head and not on the cable.

Device Overview Step 1: Unpack the Device

Step 2: Charge the Battery

Step 3: Power On

Step 4: Prepare the Device Casing

Specyfikacje produktu

Marka:	Acti
Kategoria:	monitor
Model:	PMON-2000
Kolor produktu:	Czarny
Waga produktu:	1462 g
Ilość na paczkę:	1 szt.
Technologia łączności:	Przewodowa
Port USB:	Tak
Przeznaczenie:	Uniwersalne
Napięcie operacyjne:	12 V
Przewodowa sieć LAN:	Tak
Model:	Oprawa
Kompatybilność marki:	ACTi
Wyjście BNC wideo:	Tak