Instrukcja obsługi Acti ENR-010P

Acti rejestrator wideo ENR-010P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acti ENR-010P (50 stron) w kategorii rejestrator wideo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/50

ENR-010P

ENR-020P

User Manual

2016/05/ 06

For V4.04. Firmware 36

www.acti.com

ENR-010P/ENR-020P User’s Manual

Legal Notice

Disclaimer

 The information contained in this document is intended for general information purposes.

ACTi Corporation shall not be liable for errors contained herein or for incidental or

consequential damages arising from the furnishing, performance, or use of this manual.

 The information contained herein is subject to change without notice.

Trademarks

 ACTi Connecting Vision and its logo are registered trademarks of ACTi

Corporation .

 Microsoft® and Windows® are registered trademarks of Microsoft Corporation.

All other product or company names mentioned in this document may be trademarks or

registered trademarks of their respective owners.

www.acti.com

ENR-010P/ENR-020P User’s Manual

Regulatory Compliance Information

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to the equipment that are not expressly approved by

the responsible party for compliance could void the user’s authority to operate the equipment.

European Community Compliance Statement

This product has been tested and found to comply with the limits for

Class B Information Technology Equipment according to European

Standard EN 55022 and EN 55024. In a domestic environment, this

product may cause radio interference in which cause the user be

require to take adequate measures.

Specyfikacje produktu

Marka:	Acti
Kategoria:	rejestrator wideo
Model:	ENR-010P
Kolor produktu:	Czarny
Wbudowany wyłącznik:	Tak
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	45 mm
Szerokość produktu:	260 mm
Głębokość produktu:	228 mm
Waga produktu:	2000 g
Gniazdko wyjścia DC:	Tak
Zasilacz sieciowy:	Tak
Standardy komunikacyjne:	IEEE 802.3af
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	1
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 85 %
Maksymalna liczba klatek na sekundę:	30 fps
Liczba portów USB 2.0:	2
Pobór mocy:	96 W
Obsługiwany systemy operacyjne Linux:	Tak
Diody LED:	Link, Power
Klient DHCP:	Tak
Ilość portów HDMI:	1
Liczba obsługiwanych HDD:	1
Maks. rozdzielczość:	- px
Możliwości montowania w stelażu:	Tak
Przycisk reset:	Tak
Obsługiwane protokoły sieciowe:	IPv4, IPv6, TCP/IP, UDP, HTTP, HTTPS, DHCP (server / client), PPPoE, RTP, RTSP, DNS, DDNS, NTP (SNTP), ICMP, ARP, SMTP, UPnP
Serwer DHCP:	Tak
Pojemność HDD:	- GB
Pojemność stelaża:	1U
PTZ:	Tak
Interfejs HDD:	SATA
Maksymalna pojemność przchowywania:	6 TB
Wejścia kanałów wideo:	4 kan.
Wyjście HDMI:	Tak
Ilość portów Fast Ethernet (PoE):	4