Instrukcja obsługi Acti A713

Acti nieskategoryzowany A713

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Acti A713 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

A713 Outdoor Hemispheric Dome Quick Installation Guide

The Quick Guide is for quick installing connecting A713 Outdoor Hemispheric Dome Camera. For more details, please refer to the User’s Manual of the camera.and

Installation Notices

• This camera must be installed by qualified personnel and the installation should conform to all local codes.

• Do not replace batteries of the camera. Risk of explosion may occur if the battery is replaced by an incorrect type.

• Leaving a camera in an extremely high temperature surrounding environment can result in an explosion or the

leakage of flammable liquid or gas.

• Camera subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or

gas.

• To use an external power supply, please contact the camera manufacturer to confirm that the power supply complies

with the LPS requirements and shares the same power specifications with the camera.

• The power cord of t adapter should be connected to a socket-outlet with earthing connection.he

Camera Overview

No.

Connector

Definition

Remarks

Audio I/O

Pink

Audio In (Line In)

Two-way audio transmission

Green

Audio Out (Line Out)

Alarm I/O

(4-Pin Terminal

Block)

Alarm In –

Alarm connection

* Do connect external power NOT

supply to the alarm I/O connector of

the camera.

Alarm In +

Alarm Out –

Alarm Out +

Power (DC 12V)

(2-Pin Terminal

Block)

Black

DC 12V –

Power connection

Red

DC 12V +

RJ-45

For network and PoE connections

microSD Card Slot

Insert the microSD card into the card slot to store videos and snapshots.

Do not remove the microSD card when the camera is powered on.

Reset Button

Press the button with a proper tool for at least 20 seconds to restore the

system.

NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to

support long term continu s data read/write. Please contact the manufacturer of the microSD card for ou

information regarding the reliability and the life expectancy.

Camera Cabling

Please follow the instructions below for cable connections.

Power Connection

Please use a DC 12V power adaptor and plug it to the camera and the power outlet. Alternatively, users can use an

Ethernet cable and connect it to the RJ-45 connector of the camera and a Power Sourcing Equipment (PSE) switch.

NOTE: If the device is powered over Ethernet, make sure the PSE is connected to the network.

Ethernet Cable Connection

Connect one end of the Ethernet cable to the -RJ 45 connector of the camera, and plug the other end of the cable to

the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the

PC.

NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check

the LAN connection.

Green Power LED : Lights up when the camera is powered up.

Orange Network LED (1) flashes when data is being transmitted over network,:

(2) lights up for good network connection.

NOTE: The ITE is to be connected only to PoE networks without routing to the outside plant or equivalent

description.

Before Login to the Camera

A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the

camera, ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and plug-ins or

setting Internet’s security level to default.

ActiveX Controls and Plug-ins Settings

Internet Security Level

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>, and click on <Custom level> to

change ActiveX settings.

Step 4: Set “ActiveX controls and plug-ins” items to

<Prompt> or <Enable>.

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>.

Step 4: Down the page, click <Default Level> and click

on <OK> to confirm the setting. Close the

browser window, and open a new one later for

accessing the IP camera.

V20230313

Camera Login

The default IP address of the camera is: 192.168.0.100 Therefore, to access the camera for the first time, please set

the IP address of the PC as: 192.168.0.XXX; for example:

IP Address: 192.168.0.99

Subnet Mask: 255.255.255.0

• Type in corresponding camera IP address into the URL field on the web browser and hit "Enter".

• For initial login, use the default username, “admin”, and then setup the password. Follow the on-screen instructions

to do so. This username and password will be used for succeeding login. Note that the ername and password us

are case sensitive.

Default Username admin: Password: (user must setup first)

Install the ActiveX Control

• After connecting to the camera, the request for installing the ActiveX control will appear just below the URL bar.

• Right click on the information bar, and then click on <Install ActiveX Control…> to permit ActiveX control installation.

• In the pop-up security warning window, click on <Install> to start downloading software on the PC.the

• Click on <Finish> after installation is completed.

Browser-based Viewer

The main page of the IP camera user interface is shown as the figure below.

A713

Outdoor Hemispheric Dome Camera

Quick Installation Guide

Specyfikacje produktu

Marka:	Acti
Kategoria:	nieskategoryzowany
Model:	A713

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Acti A713, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nieskategoryzowany Acti

Acti ACD-2200 Instrukcja

27 Sierpnia 2024

27 Sierpnia 2024

27 Sierpnia 2024

27 Sierpnia 2024

27 Sierpnia 2024

27 Sierpnia 2024

Acti ACD-2000QT Instrukcja

27 Sierpnia 2024

Acti ACD-2000Q Instrukcja

27 Sierpnia 2024

Acti ACD-2300 Instrukcja

27 Sierpnia 2024

Acti A951 Instrukcja

27 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024

Emko EZM-9920 Instrukcja

27 Października 2024

Emko ESM-3712-H Instrukcja

27 Października 2024

Emko ATS-10 Instrukcja

27 Października 2024

Emko EAOM-11.2 Instrukcja

27 Października 2024

Emko EPM-3790 Instrukcja

27 Października 2024

Emko EPM-7790 Instrukcja

27 Października 2024

Livarno Lux IAN 108340 Instrukcja

27 Października 2024

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024