Instrukcja obsługi ZyXEL XGN100F
ZyXEL
Schakelaar
XGN100F
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZyXEL XGN100F (8 stron) w kategorii Schakelaar. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
LEDs
Troubleshooting / Download Drivers
•
•
Make sure your computer is using a supported operating system.
Manually install the card driver. If a supported operating system
does not automatically install the driver, go to
https://www.zyxel.com/support/download_landing.shtml and
search for XGN100F. Download the driver, and install it.
Hardware Installation LEDsHardware Installation
1
2
4
CloseBack Finish
FCC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
Interference that may cause undesired operation.
3
1
2
EN
ES
FR
IT
DE
Turn off your computer, disconnect its power cord, and remove the
computer case.
Insert the XGN100F firmly into an available PCIe slot, and then
secure its back bracket.
Schalten Sie Ihren Computer aus, ziehen Sie das Netzkabel ab und
entfernen Sie das Computergehäuse.
Stecken Sie den XGN100F fest in einen freien PCIe-Steckplatz und
befestigen Sie dann die hintere Halterung.
Apague su ordenador, desconecte el cable de alimentación y retire
la carcasa.
Introduzca bien el XGN100F en una ranura PCIe disponible y a
continuación asegure su soporte posterior.
Éteignez votre ordinateur, débranchez son cordon d'alimentation et
retirez le boîtier de l'ordinateur.
Insérez fermement le XGN100F dans un emplacement PCIe
disponible, puis fixez son support arrière.
Spegni il computer, disconnetti l’alimentatore, e rimuovi la
copertura del computer.
Inserisci l’XGN100F nell’inserto PCIe, premendo bene, e poi
aggancia la staffa posteriore.
3
4
EN
ES
FR
IT
DE
Put back the computer case, connect the computer power cord,
and turn the computer back on.
A supported operating system will automatically install the driver,
and prompt you when completed.
Bringen Sie das Computergehäuse wieder an, schließen Sie das
Netzkabel des Computers an und schalten Sie den Computer
wieder ein.
Ein unterstütztes Betriebssystem installiert den Treiber automa-
tisch und wird nach Fertigstellung eine Meldung anzeigen.
Vuelva a colocar la carcasa del ordenador, conecte el cable de
alimentación y enciéndalo.
Un sistema operativo compatible instalará automáticamente el
controlador y le avisará cuando haya finalizado.
Remettez le boîtier de l'ordinateur, branchez le cordon d'alimenta-
tion de l'ordinateur et remettez l'ordinateur sous tension.
Un système d'exploitation pris en charge installe automatiquement
le pilote et vous avertit lorsque l’opération est terminée.
Rimonta la copertura del computer, connetti l’alimentatore, e
riaccendi il computer.
Il sistema operativo installerà automaticamente il driver, e ti
avviserà a installazione completata.
1
2
1
2
3
4
3
4
1
2
3
4
1
2
3
4
TSCH | ESPAÑOL | FRANÇAIS
ITALIANO
Support Information
USA
+ 1 800 255 4101
support@zyxel.com
EU
https://support.zyxel.eu
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
https://www.zyxel.com/dk/da/
XGN100F
10G Network Adapter PCIe Card with
Single SFP+ Port
Quick Start Guide
Low Profile Bracket
XGN100F
Package Contents
Requirements
Declaration of Conformity
Safety Warnings
DoC
A computer with an available PCI Express 2.0 slot using one
of the following operating systems:
• Windows 7, 8.0, 8.1, 10 or Server 2012
• Linux 3.10, 3.12, 3.20, 4.20 or 4.40
Quick
ENGLISH | DEU
SPEED
Amber
On - No Data Transmission.
Blinking - Data transmission.
Off - Disconnected or fail.
Green
ACTIVITY
On - 10G Connection.
Off - Disconnected or fail.
Green On - 1G Connection.
Off - Disconnected or fail.
LEDs
Troubleshooting / Download Drivers
•
•
Make sure your computer is using a supported operating system.
Manually install the card driver. If a supported operating system
does not automatically install the driver, go to
https://www.zyxel.com/support/download_landing.shtml and
search for XGN100F. Download the driver, and install it.
Hardware Installation LEDsHardware Installation
1
2
4
CloseBack Finish
FCC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
Interference that may cause undesired operation.
3
Support Information
EU
https://support.zyxel.eu
1
2
DK
NO
FI
SE
NL
Sluk for computeren, frakobl netledningen og fjern computerkabi-
nettet.
Indsæt XGN100F solidt i et ledigt PCle-slot og fastgør derefter dets
bagbeslag.
Schakel de computer uit, ontkoppel de stroomkabel en verwijder de
behuizing van de computer.
Plaats XGN100F stevig in een beschikbare PCIe sleuf en zet de
achtersteun vast.
Slå av datamaskinen, koble fra strømledningen og fjern datamaski-
nens kabinett.
Sett inn XGN100F i et ledig PCIe-spor, og fest den bakre braketten.
Sammuta tietokone, irrota virtajohto ja poista tietokoneen kotelo.
Asenna XGN100F-kortti vapaaseen PCIe-paikkaan ja kiinnitä
lukitussalpa.
Stäng av datorn, dra ur nätkabeln och avlägsna datorhöljet.
Sätt i XGN100F ordentligt på en ledig PCIe-plats och säkra därefter
dess bakre fäste.
3
4
DK
NO
FI
SE
NL
Sæt kabinettet tilbage på plads, tilslut computerens netledning og
tænd igen for computeren.
Et understøttet operativsystem vil automatisk installere driveren,
og give en meddelelse når det er gennemført.
Plaats de behuizing van de computer terug, verbind de stroomka-
bel van de computer en schakel de computer weer aan.
Een ondersteund besturingssysteem zal de driver automatisch
installeren en je op de hoogte stellen als dit is beëindigd.
Sett på kabinettet igjen, koble til strømledningen og slå på
datamaskinen igjen.
Et støttet operativsystem vil automatisk installere driveren og
varsle deg når installeringen er fullført.
Sulje kotelo, liitä tietokoneen virtajohto ja käynnistä tietokone.
Tuettu käyttöjärjestelmä asentaa laiteohjaimen automaattisesti ja
ilmoittaa, kun asennus on valmis.
Sätt tillbaka datorhöljet, anslut datorns nätsladd och slå på datorn
igen.
Ett operativsystem som stöds kommer automatiskt att installera
drivrutinen och meddela när den är klar.
1
2
1
2
3
4
3
4
1
23
4
1
23
4
Copyright © 2020 Zyxel Communications Corp. All Rights Reserved.
EU Importer
Zyxel Communications A/S
Gladsaxevej 378, 2. th. 2860 Søborg, Denmark
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
https://www.zyxel.com/us/en/
https://www.zyxel.com/dk/da/
Quick art GuideSt
DANSK | NEDERLANDS | NORSK | SUOMI
SVENSKA
XGN100F
10G Network Adapter PCIe Card with
Single SFP+ Port
Quick Start Guide
Low Profile Bracket
XGN100F
Package Contents
Requirements
Declaration of Conformity
Safety Warnings
DoC
A computer with an available PCI Express 2.0 slot using one
of the following operating systems:
• Windows 7, 8.0, 8.1, 10 or Server 2012
• Linux 3.10, 3.12, 3.20, 4.20 or 4.40
SPEED
Amber
On - No Data Transmission.
Blinking - Data transmission.
Off - Disconnected or fail.
Green
ACTIVITY
On - 10G Connection.
Off - Disconnected or fail.
Green On - 1G Connection.
Off - Disconnected or fail.
Specyfikacje produktu
Marka: | ZyXEL |
Kategoria: | Schakelaar |
Model: | XGN100F |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z ZyXEL XGN100F, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Schakelaar ZyXEL
30 Sierpnia 2024
16 Sierpnia 2024
13 Sierpnia 2024
7 Sierpnia 2024
6 Lipca 2024
Instrukcje Schakelaar
- Schakelaar Yamaha
- Schakelaar Tenda
- Schakelaar TP-Link
- Schakelaar Philips
- Schakelaar SilverCrest
- Schakelaar Hikvision
- Schakelaar StarTech.com
- Schakelaar Theben
- Schakelaar Behringer
- Schakelaar Nedis
- Schakelaar Nexa
- Schakelaar TRENDnet
- Schakelaar D-Link
- Schakelaar ATen
- Schakelaar APC
- Schakelaar HP
- Schakelaar Honeywell
- Schakelaar Tripp Lite
- Schakelaar Alpine
- Schakelaar Chamberlain
- Schakelaar Lindy
- Schakelaar Linksys
- Schakelaar Digitus
- Schakelaar Vimar
- Schakelaar Dahua Technology
- Schakelaar Perel
- Schakelaar Adder
- Schakelaar Ansmann
- Schakelaar Netgear
- Schakelaar Homematic IP
- Schakelaar Totolink
- Schakelaar Black Box
- Schakelaar Delta Dore
- Schakelaar Lancom
- Schakelaar Edimax
- Schakelaar EnGenius
- Schakelaar Planet
- Schakelaar LevelOne
- Schakelaar Abus
- Schakelaar Omnitronic
- Schakelaar Elro
- Schakelaar Hama
- Schakelaar Marmitek
- Schakelaar Ubiquiti Networks
- Schakelaar Goobay
- Schakelaar QNAP
- Schakelaar Hager
- Schakelaar Vemer
- Schakelaar CyberPower
- Schakelaar Electro Harmonix
- Schakelaar Fibaro
- Schakelaar Gefen
- Schakelaar Alecto
- Schakelaar Kathrein
- Schakelaar JUNG
- Schakelaar Monacor
- Schakelaar H-Tronic
- Schakelaar EVE
- Schakelaar Belkin
- Schakelaar Profile
- Schakelaar Flamingo
- Schakelaar Brennenstuhl
- Schakelaar KlikaanKlikuit
- Schakelaar Ei Electronics
- Schakelaar Sylvania
- Schakelaar Tork
- Schakelaar Techly
- Schakelaar AV:link
- Schakelaar Chacon
- Schakelaar Konig
- Schakelaar UPM
- Schakelaar Finder
- Schakelaar Gira
- Schakelaar Wago
- Schakelaar Tiptel
- Schakelaar OSD Audio
- Schakelaar Berker
- Schakelaar GAO
- Schakelaar Kraus & Naimer
- Schakelaar Phoenix Contact
- Schakelaar Seuthe
- Schakelaar SmartAVI
Najnowsze instrukcje dla Schakelaar
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024