Instrukcja obsługi ZyXEL RM410


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZyXEL RM410 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
Quick Start Guide
www.zyxel.com
RM410
Rack Mounting Kit
Version 1.00
Edition 1, 12/2012
Copyright © 2012 ZyXEL Communications Corporation
Hardware Installation Guide
RM410 Hardware Installion Guide2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
This guide shows you how to use the rack mounting kit to install the Switch in a rack. Graphics in
this book may differ slightly from your product. Every effort has been made to ensure that the
information in this manual is accurate.
Related Documentation
Module Hardware Installation Guide
This guide shows how to install the power and fan modules in the Switch.
User’s Guide
This guide shows how to use the Web Configurator to configure the Switch.
CLI Reference Guide
This guide explains how to use the Command-Line Interface (CLI) to configure the Switch.
Web Configurator Online Help
Click the help icon in any web configurator screen for help in configuring that screen and
supplementary information.
RM410 Hardware Installion Guide 3
CHAPTER 1
Rack Mounting Kit
1.1 Installation Requirements
Two front mounting brackets (short) and two rear mounting brackets (long).
16 M4 flat head screws and a #2 Philips screwdriver for attaching the brackets to the Switch.
Eight rack screws (NO.10-32UNF) and a screwdriver for attaching the Switch (with attached
brackets) to the rack. Rack depth can be from 90 to 120 cm.
Note: Failure to use the proper screws may damage the unit.
1.1.1 Precautions
Make sure the rack will safely support the combined weight of all the equipment it contains. The
maximum weight a bracket can hold is 30.6 Kg.
Make sure the position of the Switch does not make the rack unstable or top-heavy. Take all
necessary precautions to anchor the rack securely before installing the unit.
1.2 Attaching the Brackets to the Switch
Use the M4 screws (smaller than the rack screws) to attach the brackets to the Switch.
1Position the smaller front mounting bracket on one side at the front of the Switch (the ports are at
the front of the Switch), lining up the four screw holes on the bracket with the screw holes on the
side of the Switch.
2Use a #2 Philips screwdriver to install the M4 screws through the mounting bracket holes into the
Switch.
3Repeat step 2 to install the second front mounting bracket on the other side of the front of the
Switch.


Specyfikacje produktu

Marka: ZyXEL
Kategoria: Niesklasyfikowane
Model: RM410

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ZyXEL RM410, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane ZyXEL

ZyXEL

ZyXEL GS-105B v5 Instrukcja

11 Grudnia 2024
ZyXEL

ZyXEL GS-108B v5 Instrukcja

11 Grudnia 2024
ZyXEL

ZyXEL XMG-105 Instrukcja

7 Października 2024
ZyXEL

ZyXEL XMG-100 Instrukcja

3 Października 2024
ZyXEL

ZyXEL XMG-108 Instrukcja

3 Października 2024
ZyXEL

ZyXEL XMG-105HP Instrukcja

3 Października 2024
ZyXEL

ZyXEL MG-108 Instrukcja

26 Września 2024
ZyXEL

ZyXEL GS1300-26HP Instrukcja

26 Września 2024
ZyXEL

ZyXEL NSW200-28P Instrukcja

26 Września 2024
ZyXEL

ZyXEL GS1915-8EP Instrukcja

3 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane