Instrukcja obsługi ZyXEL MagicOffice

ZyXEL Niesklasyfikowane MagicOffice

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZyXEL MagicOffice (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Datasheet MagicOffice
Benefits
Slim design, outstanding signal quality
MagicOffice is a quad-band repeater designed to resolve cellular coverage
issues in smaller offices and commercial venues. It excels in this role through
its ability to connect up to 4 bands simultaneously and cover up to 900 m2
of floor space. Supporting donor antennas from up to 15 meters away, the
MagicOffice provides one to four 10 dBm quad-band outputs, each servicing
a 15 x 15 m2 area as far as 30 meters away. Be it shops, warehouses, or smaller
offices, MagicOffice means great, reliable coverage.
Auto-Adjusts to signal source changes
Traditional repeaters lack the ability to compensate for signal level changes
in cellular networks. For example, a new high-rise building may appear (or
disappear) between the base station and donor antenna, or a base station
may change its antenna directions due to reconfiguration. Such scenarios
often lead to significant input signal degradation, and traditional repeaters
just cannot adapt.
The result is that either the repeater would fail from suddenly working
with far weaker signals (such as when a new high-rise appears) or disrupt
base stations with overly strong signals (such as when a new high-rise
disappears). The former would turn the coverage area into a no-signal zone,
while the latter can lead to much worse: the repeater can become an “illegal
installation,” with serious repercussions. Thankfully, Zyxel’s MagicOffice
features built-in smart auto leveling that enables proactive adaptation
to carrier signal strength variations, providing steady indoor cellular
coverage—and worry-free mobility.
MagicOffice
Quad-band Digital Repeater
Innovative design guarantees
end-to-end performance
Superb voice and data across
2G ~ 5G FDD
Self adjusting automatically
echo free
Quad band operation in
channelized or full band
configurations
Technology independent
Easy installation plug & play
2Datasheet MagicOffice
Application Diagram
Safe with mobile networks
Echoing is another major concern in repeater deployment.
Traditional repeaters cannot space their donor and service
antennas too closely—nor output signals too strongly—
because then their antennas would receive each others
signals, echo them back and forth, and quickly destroy the
repeaters operation.
To avoid echoing (and still maximize signal strength/
coverage) while staying within the 15 m cable limit from
service antenna to repeater, traditional repeater installers
perform manual calibrations at each service antenna
point—and do it again every time there’s a layout change
in the building. There is echo cancellation technology, of
course, but that only helps to a certain degree.
Zyxel gets to the root of the problem and solves everything
completely! Its patented Echo-Avoidance Technology
is a huge step up in functionality, as it automatically
detects echoes and reduces power output accordingly.
Furthermore, MagicOffice repeaters feature real-time
isolation detection, downlink sleep, and uplink mute
functionalities. Together, these innovations enable
MagicOffice to extend mobile network signals perfectly.
Interference free.
Tech independent quad band operation
The MagicOffice supports four bands, can be configured
as full band or channelized, and each of its four service
antenna ports can simultaneously operate all four bands.
It’s also technology independent, as it is analogue based,
and supports everything from 2G to 5G FDD, VoLTE to NB-
IoT. Furthermore, it supports “frequency refarming” and
allows multiple technologies (2G/3G/4G/5G-NR FDD/NB-IoT)
to run in the same range of frequencies concurrently.
Easy installation
Traditional repeater deployments are highly labor- and
time-intensive, requiring power gain optimizations and
signal isolation measurements, using signal generators and
spectrum analyzers, before installation. And this is not one-
time-only: everything must be repeated for every coverage
antenna and redone with every change in room or antenna
positioning!
Zyxel’s MagicOfce Repeater deployments on the other
hand, are easy and installer-friendly. Great for Extra-Low
Voltage (ELV) system integrators. Simply connect power
to the MagicOffice Repeater device and set the maximum
power output for coverage, and the MagicOffice Repeater
will detect the isolation figure, set the optimal gain, and
readjust to match changes. Real time.
15 m
15 m
6 dBm
EiRP
15 m
Donor
Antenna
30 m
30 m
20 m
9.5 dBm
EiRP
9.5 dBm
EiRP
RSRP > -95 dBm
6 dBm
EiRP
10 dBm
Max. 17 dBm
Datasheet MagicOffice
For more product information, visit us on the web at www.zyxel.com
Copyright © 2022 Zyxel and/or its affiliates. All rights reserved.
All specifications are subject to change without notice. 01/03/22
Repeater System RF
Specifications
Frequency range:
Quad-band fixed at B1, B3, B8, B20,
or at B1, B3, B8, B28a
Quad-band full bandwidth or
channelized configuration
Supports all cellular network
protocols: GSM, WCDMA, UMTS, LTE
64QAM, and 5G-NR FDD 256QAM
Maximum system gain: 70 dB ± 2 dB
Input power range: -30 to -65 dBm
(auto gain control active within this
range)
ALC protection range: -20 to -30 dBm
Shutdown protection range: -10 to
-20 dBm (with auto recovery at 60
second intervals)
System damage at: ≥ -10 dBm
Maximum output power: 17 dBm
uplink 10 dBm downlink (from 4
service antenna ports)
Manual gain configuration: 0 to 35 dB
in 1 dB increments
Voltage Standing Wave Ratio (VSWR):
≤ 1.9
Group delay (Latency): ≤ 1.3 s μ
(2G/3G/4G/5G)
Noise level: ≤ 8 dB
Impedance: 50 Ω
Specifications
Band Uplink
(MHz)
Downlink
(MHz)
11920 ~ 1980 2110 ~ 2170
31710 ~ 1785 1805 ~ 1880
8880 ~ 915 925 ~ 960
20 832 ~ 862 791 ~ 821
28a 703 ~ 733 758 ~ 788
Hardware Specifications
4 x SMA-type connector for service
antenna (50-ohm coaxial cables)
1 x SMA-type connector for donor
antenna
12 V 5 A power input
Wall mounting kit
Physical Specifications
Item dimensions (WxDxH):
270 x 42 x 204 mm
(10.63” x 1.65” x 8.03”)
Item weight: 1,432 g (3.16 lb.)
Package weight: < 2,000 g (4.42 lb.)
Environmental Specifications
Operating Environment
Temperatures:
0ºC to 40ºC
Humidity:
10% to 90% (Non-condensing)
Storage Environment
Temperatures:
-10ºC to 70ºC
Humidity:
10% to 90% (non-condensing)


Specyfikacje produktu

Marka: ZyXEL
Kategoria: Niesklasyfikowane
Model: MagicOffice

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ZyXEL MagicOffice, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane ZyXEL

ZyXEL

ZyXEL XMG-105 Instrukcja

7 Października 2024
ZyXEL

ZyXEL XMG-100 Instrukcja

3 Października 2024
ZyXEL

ZyXEL XMG-108 Instrukcja

3 Października 2024
ZyXEL

ZyXEL XMG-105HP Instrukcja

3 Października 2024
ZyXEL

ZyXEL MG-108 Instrukcja

26 Września 2024
ZyXEL

ZyXEL GS1300-26HP Instrukcja

26 Września 2024
ZyXEL

ZyXEL NSW200-28P Instrukcja

26 Września 2024
ZyXEL

ZyXEL GS1915-8EP Instrukcja

3 Września 2024
ZyXEL

ZyXEL SFP10G-LR-E Instrukcja

29 Sierpnia 2024
ZyXEL

ZyXEL USG 50 Instrukcja

21 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024