Instrukcja obsługi ZTE Blade A0620

ZTE Niesklasyfikowane Blade A0620

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZTE Blade A0620 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
第1页
ZTE BLADE A0620 Upgrade Guide (Through an SD Card)
1. Cautions
The software version and pictures in this document are just for
reference only. Please use ZTE handset support website provided version
to download software.
1) Download the upgrade package.
Open http://www.ztedevice.com.cn/support and download the upgrade
package (update.zip) that matches your phone model. If the
downloaded package is not update.zip, unzip the package to obtain
update.zip.
Ensure that your micro SD card is at least 2GB.
Note Please refer to our current version download size：.
2) Remove the SIM card, then back up the data and APPs in your phone
before the upgrade.
3) Perform data backup.
Note: You should not remove the SD card during the backup process. To
avoid data lost, it is not recommended to cancel the backup process.
4) Verify that the file in the root directory of the SD cardupdate.zip
matches the model of the phone. Do not modify the file name and
extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 40%) power. Charge the phone
if required. To avoid data lost or upgrade failure, it is not recommended to
upgrade your phone through an SD card when the phone is being charged.
6) You should not perform any other operation on the phone during the
upgrade process.
7) A normal upgrade should be completed in minutes. If the phone does3-5
not reboot or show any response in minutes, you should perform the5
upgrade process again. If the phone cannot be started, perform a forced
upgrade. If the forced upgrade does not work, you should contact an
after-sale service agent for support.
2. Upgrade Description
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be
started, or the phone does not enter standby state, perform a forced upgrade.
If the phone can be started properly and the menu can be selected,Settings
perform a normal upgrade.
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
第2页
3. Upgrade Steps
A. Normal upgrade (the primary upgrade method)
1) Download the upgrade package that matches the phone model from
ZTE official website (http://www.ztedevice.com.cn/support/), extract
update.zip from the package, and copy update.zip to the root directory
of the SD card (the file name must be update.zip).
2) Select > , verify that the update.zip file in theFile Manager SD Card
root directory of the SD card is proper, see Figure 3-1:
Figure 3-1
3) Tap and select > ,see Figure 3-2.Settings System Update
Figure 3-2
4) Tap and select , then touch , After 15 secondsSystem update INSTALL
the phone automatically upgrade, See Figure 3-3to
Figure 3-3
秘密 Confidential▲
<以上所有信息均为中兴通讯股份有限公司所有，不得外传>
All Rights reserved, No Spreading abroad without Permission of ZTE
第3页
B. Forced upgrade (for the phones that cannot be started or the phones
that cannot enter standby state)
1) For a powered-off phone, Press and hold the key andvolume up
power Android recovery.key until the phone enters In this mode, the
volume powerkey can be used to select a menu, the key can be used to
confirm it.
2) Press the key to selectVolume down Apply update from SD card,
and press the key to confirm it. The root directory of the SD card ispower
opened.
3) Press the key to select the file, and press theVolume down update.zip
power key to confirm it. The phone starts the upgrade process.
4) The phone completes the upgrade process in about minutes.5
4. (Optional) Restoring the Data
If you have backed up data before upgrading your phone, restore the data.
Do not remove the SD card during the restoration process. To avoid data
lost, it is not recommended to cancel the restoration process.

Specyfikacje produktu

Marka: ZTE
Kategoria: Niesklasyfikowane
Model: Blade A0620

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ZTE Blade A0620, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane ZTE

ZTE

ZTE MC888 Instrukcja

16 Września 2024
ZTE

ZTE MC801A Instrukcja

15 Września 2024
ZTE

ZTE MF293N Instrukcja

13 Września 2024
ZTE

ZTE A2019G Pro Instrukcja

17 Sierpnia 2024
ZTE

ZTE Experia Box V10A Instrukcja

8 Sierpnia 2024
ZTE

ZTE VFD 600 Instrukcja

5 Lipca 2024
ZTE

ZTE VFD 511 Instrukcja

4 Lipca 2024
ZTE

ZTE Orange Neva play Instrukcja

4 Lipca 2024
ZTE

ZTE Blade A0621 Instrukcja

4 Lipca 2024
ZTE

ZTE Experia Box V8 Instrukcja

4 Lipca 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024