Instrukcja obsługi Zoom G1 Four

Zoom Niesklasyfikowane G1 Four

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zoom G1 Four (61 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/61

You must read the Usage and Safety Precautions before use.

Operation Manual

Multi-Effects Processor

Copying or reprinting this manual in part or in whole without permission is prohibited.

Product names, registered trademarks and company names in this document are the property of their respective companies. All trademarks and regis-

tered trademarks in this document are for identification purposes only and are not intended to infringe on the copyrights of their respective owners.

Introduction

This Multi-Effects Processor starts with numerous effects that can be combined for use together. Effect

combinations and parameter settings can be saved as patches to be used whenever you like. By simply

switching between preset patches, you can achieve dramatic changes in sound.

This processor includes a wide variety of effects, including distortion, chorus and reverb effects. Under-

standing the features of each effect is important for designing your own sounds. By turning off the effects

in a preset one at time, you should be able to learn their individual roles. If understanding how a sound

is being changed is difcult, try turning off all but one of the effects and adjusting its parameters as you

play. The order of the effects also impacts the sound. Experimenting with the effect order could bring you

closer to your desired sound.

This Multi-Effects Processor allows you to easily enjoy a variety of sounds.

We hope you will enjoy using it for many years.

Main features of the

Realistic amp and effect sounds

The rich collection of effects from the latest G Series content includes boutique pedals and realistic amp

and cabinet models that faithfully emulate the originals.

Using the free Guitar Lab effect management application on a computer (Mac/Windows), you can add ef-

fects that are distributed online as well as edit and back up patches, for example.

Craft sounds intuitively with easy operations

With 5 buttons and 4 knobs, you can create sounds intuitively like working with a compact effect or

stompbox.

Rhythm patterns and looper

The looper can record up to 30 seconds and be synchronized with rhythm patterns.

Equalization (EQ) can be quickly adjusted to suit performance conditions

In MEMORY and STOMP modes, 3 EQ (Lo/Mid/Hi) knobs and a volume (Vol) knob can be used to ad-

just the output. These enable you to make quick adjustments whether at home, in a rehearsal studio, on

stage or elsewhere.

Long operation on batteries

Continuous operation for about 18 hours is possible using 4 AA batteries (when the LCD backlight is off).

Terms used in this manual

Patch

A “patch” stores effect ON/OFF states and parameter setting values. Effects are saved and recalled in units

of patches. Five effects can be added to one patch, and the can store up to 50 patches.

Bank

One group of 10 patches is a “bank”. Patches can be quickly recalled by switching banks. The

has 5 banks.

Effect type

The available effect types include various guitar effects and amp/cabinet simulation models. Effects can

be selected from these types to be added to patches.

MEMORY mode

This mode allows you to select patches with the footswitches.

STOMP mode

Use this mode to turn effects in a patch ON/OFF with the footswitches.

EDIT mode

In this mode, edit the types and parameters and effects used in a patch.

PRESELECT

This function allows you to switch to a patch at any location while continuing to use the tone of the cur-

rently selected patch.

BANK HOLD

This function allows patch switching to be limited to the current bank.

AUTO SAVE

This function automatically saves changes to patch and effect settings.

ECO mode

This function will automatically turn the power off 10 hours after the last operation.

Introduction �� 2

Terms used in this manual �� 3

Contents �� 4

structure �� 5

Names of parts �� 7

Loading batteries �� 9

Connecting �� 10

Adjusting the overall audio character and output

level �� 11

Using patches (MEMORY mode) �� 12

Switching to MEMORY mode. �� 12

Selecting patches and banks �� 13

Changing individual patch settings �� 14

Turning effects ON/OFF with footswitches (STOMP

mode) �� 16

Activating STOMP mode �� 16

Turning effects ON/OFF with footswitches � 17

Editing effects (EDIT mode) �� 18

Activating EDIT mode �� 18

Selecting effects �� 19

Turning effects ON/OFF �� 19

Changing effect types 20 ��

Adjusting effect parameters 21 ��

Changing the effect order 22 ��

Managing patches �� 23

Saving patches 23 ��

Swapping patches 25 ��

Adjusting the master tempo 27 ��

Setting the AUTO SAVE function 28 ��

Setting the PRESELECT function 31 ��

Setting the BANK HOLD function 34 ��

Making power and display settings �� 35

Setting the type of batteries used 35 ��

Setting the ECO mode 36 ��

Setting the backlight time 37 ��

Adjusting the display contrast 38 ��

Using the tuner �� 39

Activating the tuner 39 ��

Tuning a guitar 39 ��

Changing tuner settings 41 ��

Using rhythms �� 43

Activating the rhythm function 43 ��

Setting the rhythm 44 ��

Starting/stopping rhythm playback 45 ��

Rhythm patterns 46 ��

Using the looper �� 47

Activating the looper 47 ��

Setting the looper 48 ��

Recording and playing loops 50 ��

Overdubbing loops 51 ��

Clearing the loop 52 ��

Using the expression pedal ( only) � 53

Setting pedal effects 53 ��

Adjusting the pedal 54 ��

Managing the rmware �� 56

Checking the rmware versions 56 ��

Updating the rmware 57 ��

Restoring factory default settings 58 ��

Troubleshooting �� 59

Specications �� 60

Contents

G1 FOUR/G1X FOUR

structure

Signal ow

AUX IN

INPUT

OUTPUT

1 2 3 4 5

Patch

level

Output

volume

Tuner

Effect

Looper

Rhythm

The input guitar sound passes through effects 1 – 5 in order.

( “Using patches (MEMORY mode)” on page 12)

The patch level is adjusted.

( “Using patches (MEMORY mode)” on page 12)

The overall sound is adjusted. This setting is retained even when the patch is changed.

( “Adjusting the overall audio character and output level” on page 11)

Recorded phrases can be played back in a loop.

( “Using the looper” on page 47)

Drum sounds can be played back using built-in rhythm patterns.

( “Using rhythms” on page 43)

The overall level is adjusted.

( “Adjusting the overall audio character and output level” on page 11)

This function enables tuning the connected guitar.

( “Using the tuner” on page 39)

Memory overview (patches/banks)

The can save up to 50 patches.

Patches are managed in banks of 10.

Patch 10

Patch 11

Patch 12

Patch 13

Patch 14

Patch 15

Patch 16

Patch 17

Patch 18

Patch 19

Bank 1

Patch 20

Patch 21

Patch 22

Patch 23

Patch 24

Patch 25

Patch 26

Patch 27

Patch 28

Patch 29

Bank 2

Patch 30

Patch 31

Patch 32

Patch 33

Patch 34

Patch 35

Patch 36

Patch 37

Patch 38

Patch 39

Bank 3

Patch 40

Patch 41

Patch 42

Patch 43

Patch 44

Patch 45

Patch 46

Patch 47

Patch 48

Patch 49

Bank 4

Patch 50

Patch 51

Patch 52

Patch 53

Patch 54

Patch 55

Patch 56

Patch 57

Patch 58

Patch 59

Bank 5

Operation modes

The has three operation modes that can be used as needed while performing.

• MEMORY mode

Use to select patches for performance.

( “Using patches (MEMORY mode)” on page 12)

• STOMP mode

Use this to turn effects in a patch ON/OFF with the footswitches.

( “Turning effects ON/OFF with footswitches (STOMP mode)” on page 16)

• EDIT mode

Use this to change the effects used in a patch and to edit effect parameters.

( “Editing effects (EDIT mode)” on page 18)

MEMORY mode

EDIT modeSTOMP mode

Names of parts

Front Panel

Display

This shows information, including the names of the selected patch and its effects and their parameter

values.

Mode switch

Press this to cycle through the MEMORY, STOMP and EDIT modes.

Parameter knobs

Use these to adjust effect parameters and to make various settings.

RHYTHM button

Press to activate the rhythm.

Effect/bank buttons

In MEMORY mode, these change banks.

In STOMP mode, these turn effects ON/OFF.

In EDIT mode, these select effects and turn them ON/OFF.

/ buttons

Use these to switch effects in EDIT mode. These have the same functions as the / footswitches.

/ footswitches

In MEMORY mode, use these to switch patches. In STOMP mode, use these to select effects and turn

them ON/OFF, for example.

SETTING button

This opens the SETTING screen.

LOOPER button

Press to activate the looper.

Expression pedal ( only)

When an effect in the PEDAL category is selected, this adjusts the amount of that effect. ( “Setting

pedal effects” on page 53)

Rear Panel

Pedal switch ( only)

When an effect in the PEDAL category is in use, this turns that effect ON/OFF.

Input jack

Connect a guitar here.

AUX IN jack

Connect an audio device or other external sound source here.

HINT

Signals input through the AUX IN jack will be sent to the OUTPUT jack directly without passing through

the built-in effects.

AC adapter connector

Connect the dedicated AC adapter (ZOOM AD-16) here.

USB port

Connect a computer other external device here. By using Guitar Lab, you can manage patches and edit

and add effects, for example from a computer.

You can also connect a mobile battery, for example, to provide power.

OUTPUT jack

Connect a guitar amp or headphones here.

Connecting

1, 7

25 3

1. Minimize the volume of the guitar amp.

2. To use AC power supply, connect to the dedicated AC adapter (ZOOM AD-16) to the AC adapter jack

and an outlet.

This turns the power ON.

3. To use a computer, connect a USB cable (not included) to the USB port and the computer.

When using USB bus power to operate the , connecting this cable will turn it ON.

Guitar Lab

By using Guitar Lab, you can manage patches and edit and add effects, for example from a computer.

Download Guitar Lab from the ZOOM website (https://www.zoom.co.jp).

4. Connect a guitar to the INPUT jack.

When using battery power to operate the , connecting to this will turn it ON.

5. To use external input, connect a portable audio player or other device to the AUX IN jack.

HINT

Signals input through the AUX IN jack will be sent to the OUTPUT jack directly without passing through

the built-in effects.

6. Connect a guitar amp or headphones to the OUTPUT jack.

7. Raise the guitar amp volume.

Adjusting the overall audio character and out-

put level

1. In MEMORY or STOMP mode, turn – .

Function Operation

Adjust the level of low frequencies Turn

Adjust the level of middle frequencies Turn

Adjust the level of high frequencies Turn

Adjust the overall level Turn

HINT

These adjustments are retained even when the patch is changed.

Using patches (MEMORY mode)

The manages effects in patches. A patch can have up to ve effects and save their ON/

OFF states and parameter settings.

12345

Patch

IN OUT

Effect

Up to 50 patches can be created. Groups of 10 patches are organized into banks, so effects can be quickly

recalled by switching banks.

Select patches to use in MEMORY mode.

Switching to MEMORY mode.

HINT

MEMORY mode is shown when the starts up.

1. When using STOMP or EDIT mode, press .

Pressing repeatedly, cycles through the MEMORY, STOMP and EDIT modes in order.

Selecting patches and banks

Switching patches

1. Press or .

This changes the patch.

Function Operation

Switch to lower-numbered patch Press

Switch to higher-numbered patch Press

HINT

• By continuing to press or , you can continuously switch patches.

• By using the PRESELECT function, you can switch to a patch at any location while continuing to use the

tone of the currently selected patch. ( “Setting the PRESELECT function” on page 31)

• When using the BANK HOLD function, switching is limited to patches in the same bank. ( “Setting the

BANK HOLD function” on page 34)

Switching banks

1. Press – .

This changes the bank. The LED for the selected bank lights.

Function Operation

Switch to patch numbers 10 – 19 Press

Switch to patch numbers 20 – 29 Press

Switch to patch numbers 30 – 39 Press

Switch to patch numbers 40 – 49 Press

Switch to patch numbers 50 – 59 Press

Changing individual patch settings

1. Select the patch with settings you want to change.

2. Press .

This opens the SETTING screen.

3. Press .

This opens the patch setting screen.

The patch level and name can be changed. ( “Changing patch levels” on page 14, “Changing

patch names” on page 15)

Changing patch levels

1. Turn .

This changes the patch level.

HINT

• Press to end patch setting and return to the original screen.

• In addition to settings for individual patches, the overall volume and EQ of the can

also be changed. ( “Adjusting the overall audio character and output level” on page 11)

Changing patch names

1. Turn .

This moves the cursor.

2. Turn .

This changes the character at the cursor position.

HINT

• Press to end patch setting and return to the original screen.

• The characters and symbols that can be used are as follows.

A–Z, a–z, 0–9, ! # $ % & ' () +, -. ; = @ [] ^ _ ` { } ~ (space)

• Turn to change the character type.

Turning effects ON/OFF with footswitches

(STOMP mode)

In STOMP mode, you can turn effects ON/OFF with footswitches.

Activating STOMP mode

1. When using MEMORY or EDIT mode, press .

Pressing repeatedly, cycles through the MEMORY, STOMP and EDIT modes in order.

Turning effects ON/OFF with footswitches

1. Press .

Select the effect to control.

The selected effect is shown ark inverted.

Press repeatedly to move the selection to the right.

2. Press .

This turns the e

To turn an effect ON/OFF by hand, press the – button that corresponds to the effect position.

Editing effects (EDIT mode)

In EDIT mode, you can change the effects used in a patch and adjust their parameters.

1 2 3 4 5

Patch

EDIT mode screen

Effect

Activating EDIT mode

1. Select a patch in MEMORY mode.

2. Press .

Pressing repeatedly, cycles through the MEMORY, STOMP and EDIT modes in order.

Selecting effects

1. Press – for the effect you want to edit.

This switches the effect.

The LED for the selected effect lights.

Effect nameUnit number

Parameters

HINT

The effect unit number is its position in the patch order.

Turning effects ON/OFF

1. Press – for the selected effect again.

Pressing –

Changing effect types

Selecting effect types

1. Press or .

�

Function Operation

Change to the previous effect type Press

Change to the next effect type Press

Selecting effect categories

1. While pressing , press .

The category name appears on the display.

Press again to show the next category name.

�

After the category name has been shown for a moment, the effect will change to the rst effect in the

category.

HINT

• While pressing , press to show the previous category name.

• See Guitar Lab for the explanations of each effect.

NOTE

Using the , you can combine 5 effects as you like. If the processing capability limit is

exceeded, a "PROCESS OVERFLOW" warning will appear and effects will be bypassed.

Change one of the effects to end this condition.

HINT

Select effects in the PEDAL category on the to use effects that can be controlled by the expres-

sion pedal.

Adjusting effect parameters

1. Turn – .

The parameters assigned to each knob depend on the effect. Refer to the names shown on the dis-

play.

If an effect has 5 or more parameters, use to change the screen.

HINT

• When AUTO SAVE is set to ON, parameter changes will be saved automatically. ( “Setting the AUTO

SAVE function” on page 28)

• When AUTO SAVE is set to OFF, a parameter saving screen will appear when you try to change patches.

• The AUTO SAVE function is on by default.

Changing the effect order

1. Press .

This opens the SETTING screen.

2. Press .

This opens the CHAIN screen.

The effects used in the selected patch are shown as icons.

3. Press the – button for ant to move.

4. Press the – button for the destination position.

The effect will be moved to the selected destination.

Managing patches

Saving patches

Patch changes can be saved to the same patch, overwriting it. They can also be saved to a patch with a dif-

ferent number.

1. Press .

This opens the SETTING screen.

2. Press .

This opens the SAVE screen.

3. Use , and – .

Select the destination patch number.

Function Operation

Select previous patch Press

Select next patch Press

Select patch numbers 10 – 19 Press

Select patch numbers 20 – 29 Press

Select patch numbers 30 – 39 Press

Select patch numbers 40 – 49 Press

Select patch numbers 50 – 59 Press

4. Press and at the same time.

This saves the patch, overwriting the content.

Swapping patches

The contents of the patch can be switched with a patch at a different number.

1. Press .

This opens the SETTING screen.

2. Press .

This opens the SAVE screen.

3. Turn .

The icon on the display chang o SWAP.

4. Use , and – .

Select the number of the patch to swap.

Function Operation

Select previous patch Press

Select next patch Press

Select patch numbers 10 – 19 Press

Select patch numbers 20 – 29 Press

Select patch numbers 30 – 39 Press

Select patch numbers 40 – 49 Press

Select patch numbers 50 – 59 Press

5. Press and at the same time.

This swaps the patches.

NOTE

A patch that has been edited must be saved before it can be swapped.

Save the patch before trying to swap it. ( “Saving patches” on page 23)

Setting the AUTO SAVE function

This function can be used automatically save changes to patch and effect settings when they are made.

1. Press .

This opens the SETTING screen.

2. Press .

This opens the SETUP screen.

3. Turn .

Setting Explanation

ON Automatic saving is enabled.

OFF Automatic saving is disabled.

When AUTO SAVE is ON

Patch and effect setting changes will be saved automatically.

When AUTO SAVE is OFF

Patch changes can be saved with the following procedure.

1. After editing a patch, switch to a different patch.

A message conrming that you want to save the changes will appear on the display.

2. Turn .

Setting Explanation

YES Changes will be saved.

NO Changes will not be saved.

NOTE

If you select “NO”, the other patch will open without saving the changed patch settings.

3. Press or .

This opens a screen for selecting the patch number to use for saving.

4. Use , and – .

Select the destination patch number.

Function Operation

Switch to lower-numbered patch Press

Switch to higher-numbered patch Press

Switch to patch numbers 10 – 19 Press

Switch to patch numbers 20 – 29 Press

Switch to patch numbers 30 – 39 Press

Switch to patch numbers 40 – 49 Press

Switch to patch numbers 50 – 59 Press

5. Press and at the same time.

The edited patch is saved.

HINT

An edited patch can also be saved on the SETTING screen. ( “Saving patches” on page 23)

Setting the PRESELECT function

This function can be used to switch to a patch at any location while continuing to use the tone of the cur-

rently selected patch.

1. Press .

This opens the SETTING screen.

2. Press .

This opens the SETUP screen.

3. Turn .

Setting Explanation

ON Use the PRESELECT function.

OFF Do not use the PRESELECT function.

When PRESELECT is ON

1. In MEMORY mode, use , and – .

This opens a screen for selecting the number of the preselect destination patch.

Function Operation

Switch to lower-numbered patch Press

Switch to higher-numbered patch Press

Switch to patch numbers 10 – 19 Press

Switch to patch numbers 20 – 29 Press

Switch to patch numbers 30 – 39 Press

Switch to patch numbers 40 – 49 Press

Switch to patch numbers 50 – 59 Press

2. Press and at the same time.

This switches to the selected patch.

When PRESELECT is OFF

1. In MEMORY mode, use , and – .

This changes the patch.

Function Operation

Switch to lower-numbered patch Press

Switch to higher-numbered patch Press

Switch to patch numbers 10 – 19 Press

Switch to patch numbers 20 – 29 Press

Switch to patch numbers 30 – 39 Press

Switch to patch numbers 40 – 49 Press

Switch to patch numbers 50 – 59 Press

Making power and display settings

Setting the type of batteries used

Set the type of battery used correctly so that the amount of remaining battery charge can be shown accu-

rately.

1. Press .

This opens the SETTING screen.

2. Press .

This opens the PWR/LCD screen.

3. Turn .

Setting Explanation

ALKALI Alkaline batteries

Ni-MH Nickel-metal hydride batteries

Setting the backlight time

1. Press .

This opens the SETTING screen.

2. Press .

This opens the PWR/LCD screen.

3. Turn .

Setting Explanation

OFF The backlight stays off.

ON The backlight stays on.

15s The backlight turns off 15 seconds after the last operation.

30s The backlight turns off 30 seconds after the last operation.

Adjusting the display contrast

1. Press .

This opens the SETTING screen.

2. Press .

This opens the PWR/LCD screen.

3. Turn .

HINT

This can be set from 1 to 13.

Using the tuner

Use this to tune the connected guitar.

Activating the tuner

1. When using MEMORY, STOMP or EDIT mode, press and at the same time.

This activates the tuner.

HINT

Pressing anything other than will close the tuner and return to the original screen.

Tuning a guitar

1. Play the open string that you want to tune and adjust its pitch.

The display will differ according to the selected tuner type. ( “Changing tuner settings” on page

41)

CHROMATIC tuner

The nearest note name and pitch detuning will be shown on the display and by the LEDs.

When the pitch is accurate, the LED at the center of the meter will light green and the LEDs to the left

and right will light red.

Flat Sharp

Other tuners

The nearest string number and pitch detuning will be shown on the display and by the LEDs.

When the pitch is accurate, the LED at the center of the meter will light green and the LEDs to the left

and right will light red.

Flat Sharp

Changing tuner settings

1. Press when the TUNER screen is open.

This opens the TUNER setting.

Setting the output method

1. Turn .

Setting Explanation

BYPASS Effects are bypassed and the guitar sound is output.

MUTE The guitar sound is not output.

HINT

You can also turn on the TUNER screen to change this setting.

Adjusting the standard pitch

1. Turn .

HINT

• This sets middle A between 435 and 445 Hz.

• You can also turn on the Tuner Screen to change this setting.

Setting the tuner type

1. Turn .

Setting Explanation

CHROMATIC The pitch detuning is shown according to the nearest note (in

semitones).

Other tuner types

The nearest string number is shown according to the selected

type, and the amount of detuning from its pitch is shown. The

following tuner types can be selected.

Display Explanation String number/note

7 6 5 4 3 2 1

GUITAR Standard guitar tuning with a 7th string B E A D G B E

OPEN A Open A tuning (open strings play A chord) – E A E A C# E

OPEN D Open D tuning (open strings play D chord) – D A D F# A D

OPEN E Open E tuning (open strings play E chord) – E B E G# B E

OPEN G Open G tuning (open strings play G chord) – D G D G B D

DADGAD Alternate tuning often used for tapping and other tech-

niques – D A D G A D

Using at tunings

1. Turn .

All strings can be tuned at from an ordinary tuning by one ( ×1), 2 ( ×2) or 3 ( ×3) semitones.

NOTE

Flat tuning cannot be used when the tuner type is “CHROMATIC”.

Using rhythms

You can play along with built-in rhythms.

Activating the rhythm function

1. When using MEMORY, STOMP or EDIT mode, press .

This opens the RHYTHM screen.

HINT

• Press to return to the original mode.

• During rhythm playback, press to continue rhythm playback and return to the original mode.

• The looper can be used during rhythm playback. When the RHYTHM screen is open, press to

switch to the LOOPER screen. ( “Using the looper” on page 47)

Setting the rhythm

Selecting rhythm patterns

1. Turn .

This selects the rhythm pattern. ( “Rhythm patterns” on page 46)

Setting the precount

1. Turn .

This sets the precount.

This plays a count sound before looper recording starts.

Setting Explanation

OFF A precount is not played.

ON A precount is played.

Adjusting the tempo

1. Turn .

HINT

• This can be set from 40 to 250.

• The tempo set here will be shared by the effects and the looper.

Adjusting the volume

1. Turn .

HINT

This can be set from 0 to 100.

Starting/stopping rhythm playback

1. Press .

This starts rhythm playback.

2. Press .

This stops rhythm playback.

HINT

During rhythm playback, you can switch MEMORY, STOMP and EDIT modes. To stop rhythm playback,

press to open the RHYTHM screen, and then press .

Rhythm patterns

No. Name Time

Sig.

No. Name Time

Sig.

No. Name Time

Sig.

1 GUIDE 4/4 24 R&B1 4/4 47 Jazz2 4/4

2 8Beats1 4/4 25 R&B2 4/4 48 Fusion 4/4

3 8Beats2 4/4 26 70's Soul 4/4 49 Swing1 4/4

4 8Beats3 4/4 27 90's Soul 4/4 50 Swing2 4/4

5 16Beats1 4/4 28 Motown 4/4 51 Bossa1 4/4

6 16Beats2 4/4 29 HipHop 4/4 52 Bossa2 4/4

7 16Beats3 4/4 30 Disco 4/4 53 Samba1 4/4

8 Rock1 4/4 31 4/4 54 Samba2 4/4Pop

9 Rock2 4/4 32 PopRock 4/4 55 Breaks1 4/4

10 Rock3 4/4 33 IndiePop 4/4 56 Breaks2 4/4

11 ROCKABLY 4/4 34 EuroPop 4/4 57 Breaks3 4/4

12 R'n'R 4/4 35 NewWave 4/4 58 12/8 Grv 12/8

13 HardRock 4/4 36 OneDrop 4/4 59 Waltz 3/4

14 HeavyMtl 4/4 37 Steppers 4/4 60 JzWaltz1 3/4

15 MtlCore 4/4 38 Rockers 4/4 61 JzWaltz2 3/4

16 Punk 4/4 39 Ska 4/4 62 CtWaltz1 3/4

17 FastPunk 4/4 40 2nd Line 4/4 63 CtWaltz2 3/4

18 Emo 4/4 41 Country 4/4 64 5/4 Grv 5/4

19 TomTomBt 4/4 42 Shufe1 4/4 65 Metro3 3/4

20 Funk1 4/4 43 Shufe2 4/4 66 Metro4 4/4

21 Funk2 4/4 44 Blues1 4/4 67 Metro5 5/4

22 FunkRock 4/4 45 Blues2 4/4 68 Metro

23 JazzFunk 4/4 46 Jazz1 4/4

Setting the looper

Setting of the loop recording time

1. Turn .

Setting Explanation

MANUAL Recording will continue until stopped manually or the maxi-

mum recording time is reached.

×1–64

Set the value to 1 – 64 quarter notes. The actual recording time

depends on the BPM setting.

Recording time (seconds) = 60 ÷ BPM × quarter notes

NOTE

• The looper recording time is between 1.5 and 30 seconds.

• Settings that will not t in the recording time will be adjusted automatically.

• Changing the recording time will delete the recorded data.

Setting how looping stops

1. Turn .

Setting Explanation

Instant Stops immediately after the stop operation.

Finish The loop will stop after playing to its end.

Fade Out The loop will stop after fading out.

Adjusting the tempo

1. Turn .

NOTE

Changing the tempo will delete the recorded data.

HINT

• This can be set from 40 to 250.

• The tempo set here will be shared by the effects and the rhythm.

Adjusting the volume

1. Turn .

HINT

This can be set from 0 to 100.

Recording and playing loops

1. Press .

This starts loop recording.

2. Stop recording and start loop playback.

If the recording time is set to "Manual"

Pressing again or allowing the maximum recording time to be reached will stop recording and

start loop playback.

If the recording time is set to “ ×1–64”

When the set recording time is reached, recording will stop and loop playback will start.

3. Press .

This stops loop playback.

NOTE

• During rhythm playback, recording will start after the precount.

• Sound input through the AUX IN jack will not be recorded.

HINT

• During rhythm playback, quantization is enabled so even if the recording ending time is not exact, the

loop will automatically be adjusted so that loop playback stays in time.

• During loop playback, you can switch MEMORY, STOMP and EDIT modes.

Overdubbing loops

Additional performances can be added to the recorded loop.

1. Press during loop playback.

This starts overdubbing.

When the end of the loop is reached, loop playback will continue from the beginning, and overdub-

bing can be repeated.

2. Press during overdubbing.

This stops overdubbing, but continues loop playback.

Clearing the loop

1. When loop playback is stopped, press and hold .

This clears the recorded loop.

Using the expression pedal (

G1X FOUR

only)

If an effect in the PEDAL category is selected when using a , you can control the amount of the

effect with the expression pedal.

Setting pedal effects

1. In EDIT mode, select an effect from the PEDAL category.

NOTE

Only one effect in a patch can be selected from the PEDAL category.

HINT

Selecting effects from categories ( “Selecting effect categories” on page 20)



2. Turn – .

Adjust the pedal effect. ( “Adjusting effect parameters” on page 21)

3. Use the expression pedal.

This changes the amount of the effect.

HINT

Press the front-end of the expression pedal down to turn the pedal effect ON/OFF. This does not, howev-

er, save the ON/OFF setting.

Adjusting the pedal

Adjusting the pedal sensitivity

1. While pressing , turn the power on.

This opens the PEDAL CALIBRATION screen.

2. Operate the pedal as shown on the display, and press or each time.

Calibration is nished when “Complete!” appears.

NOTE

• Adjust the pedal sensitivity in the following cases.

– Stepping on the pedal has little effect.

– The volume and tone changes greatly even when the pedal is only pressed lightly.

• If “Error!” appears, start calibration again from the beginning.

Adjusting the torque

1. Insert a 5 mm hex wrench into the torque adjustment screw on the side of the pedal.

2. Turn it clockwise to tighten the pedal and counterclockwise to loosen it.

Loosen Tighten

NOTE

Be careful because loosening the torque adjustment screw too much could cause it to become discon-

nected internally, making it impossible to keep the pedal in a xed position.

Managing the rmware

Checking the rmware versions

1. While pressing , turn the power on.

This opens the rmware VERSION screen.

2. Press or .

This restarts the and reopens the usual screen.

Updating the rmware

Check the ZOOM website (https://www.zoom.co.jp/), and download rmware for the .

1. While pressing both and , use a USB cable to connect the and the

computer.

This turns the power on and opens the FIRMWARE UPDATE screen.

2. Launch the rmware update application on the computer.

This will start the update.

"Complete!" will appear when updating nishes.

NOTE

• Do not disconnect the USB cable during a rmware update.

• In the unlikely event that a rmware update should fail while in progress, conduct the procedures from

the beginning to update the rmware again.

HINT

See the ZOOM website for details about using the application.

3. After updating completes, disconnect the USB cable and turn the power off.

HINT

Updating the rmware will not erase saved patches.

Restoring factory default settings

1. While pressing , turn the power on.

This opens an initialization conrmation screen.

2. Turn .

Select the operation.

Setting Explanation

YES Initialize settings, rewriting them with the factory defaults.

NO Cancel the initialization and return to the usual screen.

3. Press or .

This starts initialization.

When initialization nishes, “Complete!” appears, and then the usual screen reopens.

NOTE

Initialization will overwrite all settings, including patches, to their factory defaults. Be certain before us-

ing this function.

Specyfikacje produktu

Marka:	Zoom
Kategoria:	Niesklasyfikowane
Model:	G1 Four

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zoom G1 Four, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Zoom

Zoom ERL-6 Instrukcja

13 Stycznia 2025

Zoom MS-90LP+ Instrukcja

12 Grudnia 2024

Zoom MS-70CDR+ Instrukcja

4 Października 2024

Zoom ZMA-1 Instrukcja

7 Września 2024

Zoom B2 FOUR Instrukcja

31 Sierpnia 2024

Zoom G2X Four Instrukcja

28 Sierpnia 2024

Zoom 4598 Instrukcja

27 Sierpnia 2024

Zoom G3n Instrukcja

26 Sierpnia 2024

Zoom B1 FOUR Instrukcja

24 Sierpnia 2024

Zoom AC-2 Instrukcja

22 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Rock N Roller R14G Instrukcja

29 Stycznia 2025

Rock N Roller R6RT Instrukcja

29 Stycznia 2025

QSC TSC-8 Instrukcja

29 Stycznia 2025

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025

Sunding SD-581G Instrukcja

29 Stycznia 2025

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025

Shimbol Memory I PRO Instrukcja

29 Stycznia 2025

OSEE TX402 Instrukcja

29 Stycznia 2025

GOgroove Record Cleaning Kit Instrukcja

29 Stycznia 2025