Instrukcja obsługi ZKTeco G3 Pro

ZKTeco Niesklasyfikowane G3 Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZKTeco G3 Pro (70 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/70
USER MANUAL
Applicable Model: G3 Pro
Version: 1.0
Date: February 2020
Copyright © ZKTeco 2020 All rights reserved.
Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form.
All parts of this manual belong to ZKTeco co., LTD and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Trademark
is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their
respective owners.
Disclaimer
This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the
documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The
contents hereof should not be used or shared by the receiver with any third party without express written permission of
ZKTeco.
The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied
equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting
the operation and maintenance of the said equipment.
It is an essential pre requisite for the satisfactory operation and maintenance that the operating and maintenance -
personnel are fully familiar with the design and that the said personnel have received thorough training in operating and
maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment
that personnel has read, understood and followed the safety instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction
sheets or any other contract related documents, the contract conditions/documents shall prevail. The contract specific -
conditions/documents shall apply in priority.
ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this
manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without
limitation, any warranty of design, merchantability or fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced
by or linked to this manual. The entire risk as to the results and performance obtained from using the information is
assumed by the user.
ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or
exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business
information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in
or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.
This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the
manual. ZKTeco reserves the right to add, delete, amend or modify the information contained in the manual from time to
time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment. The said
additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such
amendments shall not give any right to claim any compensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any non-compliance
of the instructions contained in this manual (ii) in case of operation of the machine/unit/equipment beyond the rate
limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of
the manual.
The product will be updated from time to time without prior notice. The latest operation procedures and relevant
documents are available on http://www.zkteco.com
If there is any issue related to the product, please contact us.
About the Company
ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product
offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access
controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including
battery- - -operated fingerprint and face reader Door Locks. Our security solutions are multi lingual and localized in
numerous different languages. At the ZKTeco state- - -of the art 700,000 square foot ISO9001-certified manufacturing
facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof.
Since 1998, the founders of ZKTeco have been determined for independent research and development of biometric
verification procedures and the productization of biometric verification SDK, which was initially widely applied in PC
security and identity authentication fields. With the continuous enhancement of the development and plenty of market
applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem,
which are based on biometric verification techniques. With years of experience of the industrialization of biometric
verifications.

Specyfikacje produktu

Marka: ZKTeco
Kategoria: Niesklasyfikowane
Model: G3 Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ZKTeco G3 Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane ZKTeco

ZKTeco

ZKTeco ZPad Plus 4G Instrukcja

7 Października 2024
ZKTeco

ZKTeco ZKTime Small Business Instrukcja

16 Września 2024
ZKTeco

ZKTeco FBL2211 Instrukcja

16 Września 2024
ZKTeco

ZKTeco ProRF-T Instrukcja

15 Września 2024
ZKTeco

ZKTeco inPulse+ Instrukcja

15 Września 2024
ZKTeco

ZKTeco FR1500S Instrukcja

15 Września 2024
ZKTeco

ZKTeco GoTime Cloud Instrukcja

15 Września 2024
ZKTeco

ZKTeco iClock S880 Instrukcja

15 Września 2024
ZKTeco

ZKTeco iClock 700 Instrukcja

15 Września 2024
ZKTeco

ZKTeco SBTL3022 Instrukcja

15 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024