Instrukcja obsługi Zanussi ZWF 81263 W LINDO 300

Zanussi pralka ZWF 81263 W LINDO 300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zanussi ZWF 81263 W LINDO 300 (20 stron) w kategorii pralka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
EN
ZWF 81263W
User Manual
Washing Machine
Contents
Contents
Contents
ContentsContents
Safety information 2
Safety Instructions 3
Product description 4
Control panel 5
Programme Chart 6
Consumption values 7
Options 8
Settings 9
Before first use 9
Daily use 9
Hints and tips 12
Care and cleaning 13
Troubleshooting 15
Technical Data 17
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
•This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
•Do not let children play with the appliance.
•Keep all packaging away from children.
•Keep all detergents away from children.
•Keep children and pets away from the appliance door when it is
open.
•Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
•Do not change the specification of this appliance.
•Obey the maximum load volume of 8 kg (refer to the
“Programme chart” chapter).
•The operating water pressure (minimum and maximum) must be
between 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa).
2 www.zanussi.com
•The ventilation openings in the base (if applicable) must not be
obstructed by a carpet.
•The appliance is to be connected to the water mains using the
new supplied hose-sets. Old hose sets must not be reused.
•If the supply cord is damaged, it must be replaced by the
manufacturer, its Authorised Service Centre or similarly
qualified persons in order to avoid a hazard.
•Before maintenance, deactivate the appliance and disconnect
the mains plug from the mains socket.
•Do not use water spray and steam to clean the appliance.
•Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Safety Instructions
Installation
• Remove all the packaging and the transit
bolts.
• Keep the transit bolts. When you move the
appliance again you must block the drum.
• Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied
with the appliance.
• Do not install or use the appliance where the
temperature is less than 0 °C or where it is
exposed to the weather.
• Make sure that the floor where you install the
appliance is flat, stable, heat resistant and
clean.
• Do not install the appliance where the
appliance door can not be fully opened.
• Make sure that there is air circulation
between the appliance and the floor.
• Adjust the feet to have the necessary space
between the appliance and the carpet.
Electrical Connection
• The appliance must be earthed.
• Always use a correctly installed shockproof
socket.
• Make sure that the electrical information on
the rating plate agrees with the power
supply. If not contact an electrician.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable. Should
the mains cable need to be replaced, this
must be carried out by our Authorised
Service Centre.
• Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
• Do not touch the mains cable or the mains
plug with wet hands.
• Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
• Only for UK and Ireland: The appliance has a
13 amp mains plug. If it is necessary to
change the fuse in the mains plug, use a 13
amp ASTA (BS 1362) fuse.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Make sure not to cause damage to the water
hoses.
• Before you connect the appliance to new
pipes or pipes not used for a long time, let
the water flow until it is clean.
• The first time you use the appliance, make
sure that there is no leakage.
www.zanussi.com 3

Specyfikacje produktu

Marka: Zanussi
Kategoria: pralka
Model: ZWF 81263 W LINDO 300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zanussi ZWF 81263 W LINDO 300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje pralka Zanussi

Zanussi

Zanussi ZWF724A5W2 Instrukcja

13 Października 2024
Zanussi

Zanussi ZWF 12380 W Instrukcja

9 Października 2024
Zanussi

Zanussi ZWF 14080 G Instrukcja

2 Października 2024
Zanussi

Zanussi ZWF 8167 NW Instrukcja

1 Października 2024
Zanussi

Zanussi FLS 802 Instrukcja

30 Września 2024
Zanussi

Zanussi ZWS 2127 W Instrukcja

30 Września 2024
Zanussi

Zanussi ZWD86SB4PW Instrukcja

27 Września 2024
Zanussi

Zanussi ZWT3205 Instrukcja

26 Września 2024
Zanussi

Zanussi ZNI814PDWV Instrukcja

24 Września 2024
Zanussi

Zanussi ZWF842D1DG Instrukcja

23 Września 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy

Candy CS 15102D3-80 Instrukcja

15 Października 2024
GE

GE GSD3715FAA Instrukcja

15 Października 2024
Siemens

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024
LG

LG WTP22BK Instrukcja

15 Października 2024
Freggia

Freggia WTIE148 Instrukcja

15 Października 2024
Freggia

Freggia WISE126R Instrukcja

15 Października 2024
Freggia

Freggia WISE126B Instrukcja

15 Października 2024
Freggia

Freggia WISE126 Instrukcja

15 Października 2024
Freggia

Freggia WISA105 Instrukcja

15 Października 2024
Freggia

Freggia WISA106 Instrukcja

15 Października 2024