Instrukcja obsługi Zanussi ZGG643ITXC

Zanussi piekarnik ZGG643ITXC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zanussi ZGG643ITXC (12 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
29
During Operation
This appliance has been designed for non professional
purpose in private houses only. It is meant to cook
edible foodstuff only and MUST NOT be used for any other
purposes.
It is dangerous to alter the specification in any way.
For hygiene and safety reasons, this appliance should
be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Zanussi Service
Centre. Always insist on genuine Zanussi spare parts.
Ensure that all control knobs are in the OFF position
when not in use.
Should you connect any electrical tool to a plug near
this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.
If the appliance is out of order, disconnect it from the
electric supply.
Child Safety
This appliance has been designed to be operated by
adults and children under supervision. Young children
MUST NOT be allowed to tamper with the controls or play
near or with the oven.
Accessible parts of this appliance may become hot
when it is in use. Children should be KEPT AWAY until it
has cooled.
About Installation, Cleaning
and Manteinance
It is mandatory that all operations required for the
installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.
Disconnect the appliance from the electrical supply,
before carrying out any cleaning or manteinance work.
Ensure a good ventilation around the appliance. A
poor air supply could cause lack of oxygen.
Ensure that the gas supply complies with the gas type
stated on the identification label, placed near the gas
supply pipe.
ENGLISH
These warnings are provided in the interest of safety. You MUST read them carefully before
installing or using the appliance.
Important Safety Information
Using a gas cooking appliance will produce heat
and moisture in the room which it has been
installed in. Ensure a continuous air supply,
keeping the air vents in good conditions or
installing a cooker hood with discharge tube.
In case of intensive or long time use of the
appliance, make the ventilation more efficient,
by opening a window or increasing the electric
exhaust fan power.
Once you removed all packaging from the appliance,
ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.
The manufacturer disclaims any responsability
should all the safety measures not be carried out.
Service
Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Centre.
Always insist on genuine spare parts.
Environmental Information
After installation, please dispose of the packaging
with due regard to safety and the environment.
When disposing of an old appliance, make it
unusable, by cutting off the cable.
It is most important that this instruction
book should be retained with the appliance
for future reference. Should the appliance
be sold or transferred, always ensure that
the book is left with the appliance in order
that the new owner can get to know the
functions of the appliance and the relevant
warnings. These instructions are only for the
countries stated by the symbol printed on the
front cover of this instruction book.
30
Hob burners control knobs
The hob burners control knobs are situated on the hob
right hand side. The symbols on the knobs mean that :
l there is no gas supply
there is maximum gas supply
there is minimum gas supply
Lighting the burners
For easier lighting, proceed before putting a
pan on the pan support.
To light a burner, turn the relevant knob
anticlockwise to maximum position and push
down the knob to ignite.
After lighting the flame, keep the knob pushed
down for about 5 seconds. This will allow the
"thermocouple" (Fig. 1 lett. C) to be heated and the
safety device to be switched off, otherwise the gas
supply would be interrupted.
Then, check the flame is regular and adjust it as
required.
If you cannot light the flame even after several
attempts, check the "cap" (Fig. 1 lett. A) is in the
correct position.
To put the flame out, turn the knob to the symbol l.
Burner minimum maximum
diameter diameter
Big (rapid) 160 mm. 260 mm.
Medium (semirapid) 120 mm. 220 mm.
Small (Auxiliary) 80 mm. 160 mm.
Fig. 1 FO 2295
A - Burner cap
B - Ignition candle
C - Thermocouple
Contents
Instruction for the User 30
Cleaning and Maintenance 31
Guarantee 37
This appliance complies with the
following E.E.C. Directives:
- 73/23 - 90/683 (Low Voltage Directive);
- 89/336
(Electromagnetical Compatibility
Directive);
- 93/68 (General Directives)
and subsequent modifications.
MANUFACTURER:
ELECTROLUX ZANUSSI S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italie)
For the User
The following symbols will be found in the text to
guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an
operation
Hints and Tips
Environmental information
i
F
Guide to Use the instructions
For the Installer
Technical Data 32
Electrical Connection 33
Adaptation to different types of gas 34
Building In 35
Instruction for the User
i
F
31
Always turn the flame down or put it out before
taking the pans off the burner.
Using the hob correctly
To ensure maximum burner efficiency, it is strongly
recommended that you use only pots and pans with a
bottom fitting the size of the burner used, so that flame
will not spread beyond the bottom of the vessel (see the
table beside).
It is also advisable, as soon as a liquid starts boiling, to
turn down the flame so that it will barely keep the liquid
simmering.
Use only pans or pots with flat bottom.
Carefully supervise cookings with fats or oil,
since these types of foodstuff can result in a
fire, if over-heated.
i
Cleaning and Maintenance
Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
manteinance work.
Wash the enamelled components with warm soapy
water. Never use abrasive cleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.
Regularly wipe over the hob top using a soft cloth weel
wrung out in warm water to which a little liquid detergent
has been added. Avoid the use of the following:
- household detergent and bleaches;
- impregnated pads unsuitable for non-stick saucepans;
- steel wool pads;
- bath/sink stain removers.
Should the hob top become heavily soiled, it is
recommended that a proper cleaning product is used.
The electric ignition is obtained through a ceramic
"candle" and a metal electrode (fig. 1 lett. B). Keep these
components well clean, to avoid difficult lighting, and
check that the burner crown holes are not obstructed.
The cap and crown of each burner are secured with two
screws. To separate the two pieces, lift the cap, turn it
upside down, then undo the two fixing screws as shown
in fig. 3.
After a thorough cleaning, reassemble the two parts and
refit the cap in its correct position on the burner.
Periodic Maintenance
Periodically ask your local Service Centre to check the
conditions of the gas supply pipe and the pressure
adjuster, if fitted.
To ensure the good operation of the hob and its safety
features, it is necessary that the taps are periodically
lubricated.
lThe periodic lubrication of the taps must be
carried out by qualified personnel, which you
must refer to also in case of malfunctioning.
Fig. 2
Fig. 3
FO 2110
FO 2265

Specyfikacje produktu

Marka: Zanussi
Kategoria: piekarnik
Model: ZGG643ITXC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zanussi ZGG643ITXC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piekarnik Zanussi

Zanussi

Zanussi ZKCXL3X1 Instrukcja

15 Stycznia 2025
Zanussi

Zanussi ZOA35526 Instrukcja

15 Stycznia 2025
Zanussi

Zanussi ZOB25601XU Instrukcja

15 Stycznia 2025
Zanussi

Zanussi zos 745 qx Instrukcja

15 Stycznia 2025
Zanussi

Zanussi zou 341 w n Instrukcja

15 Stycznia 2025
Zanussi

Zanussi ZC602V Instrukcja

15 Stycznia 2025
Zanussi

Zanussi ZOHNB0W2 Instrukcja

30 Grudnia 2025
Zanussi

Zanussi ZC565G Instrukcja

30 Grudnia 2025
Zanussi

Zanussi ZVENN6XN Instrukcja

30 Grudnia 2025
Zanussi

Zanussi ZOFNC0K2 Instrukcja

30 Grudnia 2025

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik

Whirlpool

Whirlpool ACMT 5131 Instrukcja

15 Stycznia 2025
Miele

Miele H 4130 E Instrukcja

15 Stycznia 2025
Siemens

Siemens HB65AB522 Instrukcja

15 Stycznia 2025
AEG

AEG Competence 30480 B W Instrukcja

15 Stycznia 2025
AEG

AEG Competence B4100-a Instrukcja

15 Stycznia 2025
Siemens

Siemens HB78AA770 Instrukcja

15 Stycznia 2025
Indesit

Indesit FE10 K Instrukcja

15 Stycznia 2025
Siemens

Siemens he 33au540 Instrukcja

15 Stycznia 2025
Miele

Miele h 310 1 b Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool AKZ 152 Instrukcja

15 Stycznia 2025