Instrukcja obsługi Yamaha RX-V595a

Yamaha odbiornik RX-V595a

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha RX-V595a (63 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/63
RX-V595a
Natural Sound AV Receiver
Ampli-Tuner audio-vidéo
OWNER’S MANUAL
MODE D’EMPLOI
U C A
2
1Read Instructions – All the safety and operating instructions
should be read before the unit is operated.
2Retain Instructions – The safety and operating instructions
should be retained for future reference.
3Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4Follow Instructions – All operating and other instructions
should be followed.
5Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the
manufacturer.
6A A unit and cart combination should be moved
with care. Quick stops, excessive force, and
uneven surfaces may cause the unit and cart
combination to overturn.
7Wall or Ceiling Mounting – The unit should be mounted to a
wall or ceiling only as recommended by the manufacturer.
example, the unit should not be situated on a bed, sofa,
rug, or similar surface, that may block the ventilation
openings; or placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air
through the ventilation openings.
9Heat – The unit should be situated away from he
such as radiators, stoves, or other appliances th
heat.
10 Power Sources – The unit should be connected t
supply only of the type described in the operatin
tions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords sh
routed so that they are not likely to be walked on
pinched by items placed upon or against them, p
particular attention to cords at plugs, convenienc
tacles, and the point where they exit from the un
12 Cleaning – The unit should be cleaned only as re
mended by the manufacturer.
13 Nonuse Periods – The power cord of the unit sho
unplugged from the outlet when left unused for a
period of time.
14 Object and Liquid Entry – Care should be taken
objects do not fall into and liquids are not spilled
inside of the unit.
15 Damage Requiring Service – The unit should be
by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally
a marked change in performance; or
E. The unit has been dropped, or the cabinet da
16 Servicing – The user should not attempt to servic
beyond those means described in the operating
tions. All other servicing should be referred to q
service personnel.
17 Power Lines – An outdoor antenna should be loc
from power lines.
18 Grounding or Polarization – Precautions should
so that the grounding or polarization is not defea
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
you to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the presence
of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
National Electrical Code, ANSI/NFPA 70, provides informa-
tion with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
FCC INFORMATION (for US customers only)
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing.
Since hearing damage from loud sounds is often
undetectable until it is too late, YAMAHA and the
Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid
prolonged exposure from excessive volume levels.
Compliance with FCC regulations does not gu
that interference will not occur in all installation
product is found to be the source of interferen
can be determined by turning the unit “OFF” a
please try to eliminate the problem by using on
following measures:
Relocate either this product or the device that
affected by the interference.
Utilize power outlets that are on different bran
breaker or fuse) circuits or install AC line filter/
In the case of radio or TV interference, relocat
the antenna. If the antenna lead-in is 300 ohm
lead, change the lead-in to coaxial type cable.
If these corrective measures do not produce s
tory results, please contact the local retailer au
to distribute this type of product. If you can no
the appropriate retailer, please contact Yamah
Electronics Corp., U.S.A. 6660 Orangethorpe A
Buena Park, CA 90620.
The above statements apply ONLY to those pr
distributed by Yamaha Corporation of America
subsidiaries.
1. IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC,
to use the product.
2. IMPORTANT : When connecting this product to
accessories and/or another product use only high
quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instruc-
tions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE : This product has been tested and found to
comply with the requirements listed in FCC Regula-
tions, Part 15 for Class “B” digital devices. Compliance
with these requirements provides a reasonable level of
assurance that your use of this product in a residential
environment will not result in harmful interference with
other electronic devices.
This equipment generates/uses radio frequencies and,
if not installed and used according to the instructions
found in the users manual, may cause interference
harmful to the operation of other electronic devices.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
GROUND
CLAMP
LEAD IN
WIRE
ANTENNA
DISCHAR
(NEC SEC
GROUNDING
(NEC SECTIO
GROUND CLAMPS
POWER SERVICE GROUND
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC
SERVICE
EQUIPMENT
NEC
– NATIONAL ELECTRICAL CODE

Specyfikacje produktu

Marka: Yamaha
Kategoria: odbiornik
Model: RX-V595a

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Yamaha RX-V595a, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Yamaha

Yamaha

Yamaha HTR-5072 Instrukcja

9 Stycznia 2025
Yamaha

Yamaha MA2030a Instrukcja

31 Grudnia 2025
Yamaha

Yamaha PC412-DI Instrukcja

31 Grudnia 2025
Yamaha

Yamaha PC406-D Instrukcja

31 Grudnia 2025
Yamaha

Yamaha PA2030A Instrukcja

31 Grudnia 2025
Yamaha

Yamaha PC2001N Instrukcja

31 Grudnia 2025
Yamaha

Yamaha PC9501N Instrukcja

31 Grudnia 2025
Yamaha

Yamaha P1000S Instrukcja

31 Grudnia 2025
Yamaha

Yamaha MusicCast RX-V583 Instrukcja

31 Grudnia 2025
Yamaha

Yamaha PC4801N Instrukcja

31 Grudnia 2025

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Marantz

Marantz SR-8000 Instrukcja

15 Stycznia 2025
AKAI

AKAI AM-32 Instrukcja

15 Stycznia 2025
Peavey

Peavey CKd 608 Instrukcja

15 Stycznia 2025
OSD Audio

OSD Audio Nero HTX4150 Instrukcja

14 Stycznia 2025
S.M.S.L

S.M.S.L PA200 Instrukcja

14 Stycznia 2025
Pyle

Pyle PFMRA340BB.5 Instrukcja

13 Stycznia 2025
Wavtech

Wavtech link700.4plus Instrukcja

13 Stycznia 2025
Behringer

Behringer NU6000DSP Instrukcja

12 Stycznia 2025
Denon

Denon DRA-935R Instrukcja

12 Stycznia 2025
Kenwood

Kenwood KMM-BT508DAB Instrukcja

12 Stycznia 2025