Instrukcja obsługi Xiaomi Mi Bunny MITU

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Xiaomi Mi Bunny MITU (6 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Mi Bunny Speaker
Accessories
Mi Bunny Speaker х 1
Overview
Micro SD slot
Charging port
Overview
Play/Pause
Long press: on/o device
Switch SD card folder
Long keypress: activate previous folder
Volume down
Long keypress: switch previous track
Volume up
Long keypress: switch next track
Switch les source (Bluetooth or SD card);
Long press: detection devices via Bluetooth
Charge level information
Press both buttons simultaneously
* Connect to new devices
Press and hold (1) for 2 seconds, then resume detection of Bluetooth device.
Select connection to pair devices.
* When downloading music on SD card by connecting a USB cable to your computer, press
the button (5) to turn the copy.
Connecting
Turning Mi Bunny Speaker on
Press and hold a button (1) for 2 seconds, until you hear corresponding beep.
Mi Bunny Speaker automatically turns on Bluetooth mode of devices detection.
Connecting to other devices
Open Bluetooth settings, select «Mi Bunny Speaker» in a list of available devices.
After successful combination of appropriate devices you can hear a beep signal. Indicator
will light up blue.
With further use turn on Bluetooth on Mi Bunny Speaker and device automatically
connects to it.
Frequently used functions
Play music via Bluetooth
Pairing of smartphone and Mi Bunny Speaker: smartphone operating as a control panel
and Mi Bunny Speaker is a speaker.
Play music from SD card
After inserting a card, press Play button to play les, stored on Micro SD.
* Support Micro SD 32GB or more.
* Upload tracks to SD card via USB cable.
Notes
Charging
During charging a power indicator ickers green. Permanent Red light indicates a full
charge of the device.
* During charging there is a certain limit of playback volume.
Specications
Maximum output power: 2.8 W x 1 (4 ohms, THD <1%);
Speaker diameter. 45 mm, 1 driver;
Bluetooth Edition: 4.0;
Frequency: 150 Hz - 20 kHz;
Battery capacity / Voltage: 650 mAh 3.7 V;
The duration of battery life: 3 hours (60 dB / 1m);
Power Consumption USB: 5 V, 500 mA;
Size (length x width x height): 80 x 74 x 136 mm;
Operating temperature 0 ° C - 45 ° C.

Specyfikacje produktu

Marka: Xiaomi
Kategoria: Niet gecategoriseerd
Model: Mi Bunny MITU

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Xiaomi Mi Bunny MITU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Xiaomi

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd