Instrukcja obsługi Worx WX852L

Worx Niesklasyfikowane WX852L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx WX852L (32 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
12V Multifunction Jump Starter with LED Lights
Aide au démarrage multifonctions de 12V avec les voyants LED
Motor de arranque auxiliar multifunción de 12V con luces LED
P05
P12
P20
EN
F
ES
2
WARNING Read all safety warnings
and all instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
WARNING: This product can expose you
to chemicals including lead and Di(2-
ethylhexyl)phthalate (DEHP) which are known
to the State of California to cause cancer and
birth defects or other reproductive harm. For
more information go to www.P65Warnings.
ca.gov.
1. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to battery,
picking up or carrying the appliance. Carrying
the appliance with your finger on the switch or
energizing appliance that have the switch on
invites accidents.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery may create a risk of fire when used
with another battery.
3. Use appliances only with specifically designated
battery. Use of any other battery may create a risk
of injury and fire.
4. When battery is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together
may cause burns or a fire.
5. Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6. Do not use a battery or appliance that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
7. Do not expose a battery or appliance to fire
or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
8. Follow all charging instructions and do not
charge the battery or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
of the specified range may damage the battery
and increase the risk of fire.
9. Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
10. Do not modify or attempt to repair the appliance
or the battery (as applicable) except as indicated
in the instructions for use and care.
Instructions pertaining to risk of fire, electric
shock, or injury to persons
IMPORTANT SAFETY INSTRUCTIONS
Warning- When using this product, basic precautions
should always be followed including the following:
1. Read all the instructions before using the product.
2. To reduce the risk of injury, close supervision is
necessary when the product is used near children.
3. Do not put fingers or hands into the product.
4. Use of an attachment not recommended or sold
by power pack manufacturer may result in a risk
of fire, electric shock, or injury to persons.
5. To reduce risk of damage to the electric plug and
cord, pull the plug rather than the cord when
disconnecting the power pack.
6. Do not use a battery pack or appliance that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
7. Do not operate the power pack with a damaged
cord or plug, or a damaged output cable.
8. Do not disassemble the power pack, take it to a
qualified service person when service or repair is
required. Incorrect reassembly may result in a risk
of fire or electric shock.
9. To reduce the risk of electric shock, unplug the
power pack form the outlet before attempting any
instructed servicing.
10. WARNING – RISK OF EXPLOSIVE GASES.
a. WORKING IN VICINITY OF A LEAD ACID
BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR THIS
REASON, IT IS OF THE UTMOST IMPORTANCE
THAT YOU FOLLOW THE INSTRUCTIONS EACH
TIME YOU USE THE POWER PACK.
b. To reduce risk of battery explosion, follow
these instructions and those published by battery
manufacturer and manufacturer of any equipment
you intend to use in vicinity of the battery. Review
cautionary marking on these products.
11. PERSONAL PRECAUTIONS
a. Consider having someone close enough by to
come to your aid when you work near a lead-acid
battery.
b. Have plenty of fresh water and soap nearby in
case battery acid contacts skin, clothing, or eyes.
c. Wear complete eye protection and clothing
protection. Avoid touching eyes while working
near battery.
d. If battery acid contacts skin or clothing, wash
3
immediately with soap and water. If acid enters
eye, immediately flood eye with running cold
water for at least 10 minutes and get medical
attention immediately.
e. NEVER smoke or allow a spark or flame in
vicinity of battery or engine.
f. Be extra cautious to reduce risk of dropping a
metal tool onto battery. It might spark or short-
circuit battery or other electrical part that may
cause explosion.
g. Remove personal metal items such as rings,
bracelets, necklaces, and watches when working
with a lead-acid battery. A lead-acid battery can
produce a short-circuit current high enough to
weld a ring or the like to metal, causing a severe
burn.
12. When charging the internal battery, work in a well
ventilated area and do not restrict ventilation in
any way.
13. Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
14. Do not expose a power pack to fire or excessive
temperature. Exposure to fire or temperature
above 130°C may cause explosion. The
temperature of 130°C can be replaced by the
temperature of 265°F.
15. Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
16. Attach output cables to a battery and chassis as
indicated below. Never allow the output clamps
to touch one another.
a. Instructions shall include step by step
directions for the proper use of the booster
function detailing the correct steps to connect and
disconnect the booster cables to the battery.
b. Each step shall be a different numbered item.
SAVE THESE INSTRUCTIONS
Warning- When using flashlight or lanterns,
additional precautions should always be
followed including the following:
1. To reduce the risk of injury, close supervision is
necessary when a product is used near children.
2. Do not contact hot parts.
3. Only use attachments recommended or sold by
the manufacturer.
4. Do not use the unit for works other than those for
which they are designed.
5. Do not disassemble the unit and keep it out of the
reach of children.
6. Do not use in the rain or get wet.
7. Warning: to reduce the risk of injury, do not stare
at operating lamp. Serious eye injury could occur.
8. Warning: Do not use magnet for horizontal
overhead mounting.
9. Warning: The lens get very hot during use. To
reduce the risk of burns, do not touch hot lens.
10. To reduce the risk of fire, keep away from
combustible materials while in operation.
11. Do not short out the contacts of jump starter.
12. Do not charge the jump starter with a damaged
wall charger or power extension cord. Replace
them immediately.
13. When using, ensure that the product is in a
well-ventilated area and away from inflammable
materials.
14. Batteries can get hot during charging. Do not
overcharge any batteries. Ensure that Jump
Starter are not left unsupervised during charging.
15. Protect the product away from fire and heat, such
as sunlight.
16. Please use the specified charger (cable) for
charging. If the product or cable is damaged,
please do not use the product.
17. Do not disassemble, bump, squeeze, puncture or
penetrate the product.
18. Keep jump starter dry, clean and oil-free. Be sure
to use a clean cloth when cleaning and do not use
any corrosive solvent.
19. Longer life and better performance can be
obtained if the battery is charged when the air
temperature is between 18°C and 24°C. Do not
charge the battery in air temperatures below 0°C,
or above 40°C. This is important as it can prevent
serious damage to the battery.
20. Do not recharge non-rechargeable batteries, as
they can overheat and break.
21. Risk of electric shock and fire. This device cannot
be stored at a high temperature, especially not in
the vehicle with high temperature.
WARNING: The jump starter should only be
used as a jump starter with the supplied Safety
Cable. NEVER use an alternate cable when
jump starting with the jump starter.
1. Someone should always be within range of your
voice or close enough to come to your aid when
you work near a lead-acid battery.
2. Have plenty of fresh water and soap nearby in
case battery acid contacts skin, clothing or eyes.
Protective eyewear should always be worn when
working near lead-acid batteries.
3. If battery acid contacts skin or clothing, wash
immediately with soap and water. If acid enters
eye, immediately flood eye with running cold
water for at least 10 minutes and get medical
attention immediately.
4. Be extra cautious to reduce risk of dropping a
metal tool onto a battery. It might spark or short
circuit the battery or another electrical part that

Specyfikacje produktu

Marka: Worx
Kategoria: Niesklasyfikowane
Model: WX852L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Worx WX852L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Worx

Worx

Worx MakerX WX741.9 Instrukcja

5 Października 2024
Worx

Worx MakerX WX743.9 Instrukcja

5 Października 2024
Worx

Worx WX891.9 Instrukcja

5 Października 2024
Worx

Worx MakerX WX739 Instrukcja

5 Października 2024
Worx

Worx MakerX WX739.9 Instrukcja

4 Października 2024
Worx

Worx WX891 Instrukcja

4 Października 2024
Worx

Worx WA3014 Instrukcja

4 Października 2024
Worx

Worx Landroid WA0892 Instrukcja

4 Października 2024
Worx

Worx MakerX WX744.9 Instrukcja

4 Października 2024
Worx

Worx Landroid WA0862 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024