Instrukcja obsługi Worx WX500L
Worx
Zaagmachine
WX500L
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Worx WX500L (12 stron) w kategorii Zaagmachine. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
EN
F
ES
Cordless Reciprocating Saw
Scie alternative sans fil
Sierra de vaivén inalámbrica
P02
P12
P22
2
WARNING: Some dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to
the state of California to cause cancer, birth defects
or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and
other masonry products and
• Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
WARNING: This product can expose you to
chemicals including lead, phthalate or bisphenol
A which are known to the State of California to cause
cancer, birth defects or other reproductive harm.
Wash your hands after use. For more information
go to www.P65Warnings.ca.gov.
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for fut ure
reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with grounded
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use marked “W-A” or “W”. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a Ground
Fault Circuit Interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of
electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional star ting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection
facilities, ensure these are connected and
properly used. Use of dust collection can
3
reduce dust-related hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4. POWER TOOL USE AND CARE
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection
facilities, ensure these are connected and
properly used. Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
5. BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to
fire or excessive temperature. Exposure
to fire or temperature above 130 °C may cause
explosion.
g) Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions. Charging improperly or
at temperatures outside the specified range
may damage the battery and increase the risk
of fire.
6. SERVICE
a) Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
b) Never service damaged battery packs.
Service of battery packs should only be
performed by the manufacturer or authorized
service providers.
1. Hold reciprocating saw by insulated
gripping surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
2. Use clamps or another practical way to
secure and support the workpiece to a
stable platform. Holding the workpiece by
hand or against your body leaves it unstable
and may lead to loss of control.
Specyfikacje produktu
Marka: | Worx |
Kategoria: | Zaagmachine |
Model: | WX500L |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Worx WX500L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Zaagmachine Worx
19 Września 2024
4 Września 2024
19 Sierpnia 2024
16 Sierpnia 2024
6 Sierpnia 2024
6 Sierpnia 2024
6 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Zaagmachine
- Zaagmachine AEG
- Zaagmachine Milwaukee
- Zaagmachine Stihl
- Zaagmachine Bosch
- Zaagmachine Parkside
- Zaagmachine Stiga
- Zaagmachine Festool
- Zaagmachine Stanley
- Zaagmachine Black & Decker
- Zaagmachine Scheppach
- Zaagmachine Proxxon
- Zaagmachine Ford
- Zaagmachine Gardena
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Remington
- Zaagmachine Genesis
- Zaagmachine Hyundai
- Zaagmachine Silverline
- Zaagmachine Husqvarna
- Zaagmachine Makita
- Zaagmachine Ozito
- Zaagmachine RYOBI
- Zaagmachine Flex
- Zaagmachine Baumr-AG
- Zaagmachine Sovereign
- Zaagmachine Hilti
- Zaagmachine Trotec
- Zaagmachine AL-KO
- Zaagmachine Güde
- Zaagmachine Texas
- Zaagmachine ATIKA
- Zaagmachine Zipper
- Zaagmachine Mafell
- Zaagmachine Florabest
- Zaagmachine Ferm
- Zaagmachine Hitachi
- Zaagmachine Herkules
- Zaagmachine Craftsman
- Zaagmachine Fieldmann
- Zaagmachine Homelite
- Zaagmachine Ridgid
- Zaagmachine Gardenline
- Zaagmachine PowerPlus
- Zaagmachine Bebe Confort
- Zaagmachine Vonroc
- Zaagmachine Powerfix
- Zaagmachine HiKOKI
- Zaagmachine McCulloch
- Zaagmachine Porter-Cable
- Zaagmachine Metabo
- Zaagmachine Cotech
- Zaagmachine Skil
- Zaagmachine Wolfcraft
- Zaagmachine Brennenstuhl
- Zaagmachine ACG
- Zaagmachine Sun Joe
- Zaagmachine Bort
- Zaagmachine Dolmar
- Zaagmachine Qualcast
- Zaagmachine Max
- Zaagmachine MTM
- Zaagmachine Meister Craft
- Zaagmachine Batavia
- Zaagmachine Holzmann
- Zaagmachine Elu
- Zaagmachine BGU
- Zaagmachine Verto
Najnowsze instrukcje dla Zaagmachine
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024