Instrukcja obsługi Whirlpool HSCX 10444

Whirlpool Suszarka bębnowa HSCX 10444

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool HSCX 10444 (8 stron) w kategorii Suszarka bębnowa. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

PRODUCT DESCRIPTION

APPLIANCE

DAILY REFERENCE

GUIDE

CONTROL PANEL

1. Worktop

2. Control panel

3. Water tank

4. Door

5. Door handle

6. Door filter (behind

door)

7. Bottom filter (behind

flap)

8. Adjustable feet (4)

1. On/Off button (Reset if

long pressed)

2. Settings button

3. Drum light

4. Key lock

5. Steam option

6. Finish in

7. Drying time

8. Dryness level

9. Options button

10. Start/Pause button

11. OK key (to confirm)

12. UP key

13. DOWN key

14. Options indicators

15. Dryness level

indicators

16. Display

17. Eco monitor

18. Programmes area

1. 7.2. 6. 8.4. 10.3. 9.5.

11.

12.

13.

18. 17. 16. 15. 14.

Before using the appliance, carefully

read the Health and Safety guide.

Before using the dryer, the transport

bolts must be removed.

For detailed instructions on how to

remove them, refer to the Installation Guide.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on http://www.whirlpool.eu/register

BEFORE USING THE DRYER

CHECK DRAIN HOSE AND WATER TANK

Make sure that the water tank is correctly inserted.

Make sure that the drain hose on the back of the dryer is xed

correctly, either to the dryer’s water tank, or to your domestic

sewage system (see Installation guide).

1. LOAD LAUNDRY

• Prepare your laundry according to the

recommendations in section “ ”. HINTS AND TIPS

Make sure that pockets are empty.

• Open the door and load the laundry. Observe

the maximum load sizes given in the PROGRAMME

CHART.

2. CLOSE THE DOOR

• Make sure that no laundry gets stuck between

door glass and door lter.

• Close the door so that you can hear it click shut.

3. SWITCH ON DRYER

• Press the . An animation appears on the On/O button

control panel, and there is a sound. Afterwards the dryer is

ready to be operated.

FIRST TIME USE

DAILY USE See Use and Care Guide for more details on functions / see last page for

information on how to obtain the Use and Care Guide

Make sure that no lighters or

matches remain in the laundry.

Make sure that the laundry is

not soaked with flammable

liquids.

When switching on the dryer for the rst time, you will be asked to

• Set the desired language

• Adapt the value for your local water conductivity

• Set the dryer to recall the last used programme setting or not when switching it on.

Refer to HINTS AND TIPS and OPTIONS, FUNCTIONS AND INDICATORS / Settings.

WARNING

4. SET THE DESIRED PROGRAMME

• Select programme:

Press the programme symbol on the control panel. Programme

name, default dryness level and default programme duration

appear on the display.

• Change the dryness level, if needed

Press the Dryness level button to select the desired dryness level:

iron dry

cupboard dry

extra dry

The symbol on the control panel lights up.

• Select options, if needed

Press the options button; the list of available options appears on the

display. Press the UP or DOWN key to navigate through the list. Press

the OK key to select the desired option; a checkmark appears on the

display next to the option name, and the option symbol lights up.

Some options / functions can be selected by directly pressing the

button:

If an option is not selectable for the programme, it shortly blinks

and switches o again when the button is pressed , and there is a

sound.

Refer to section OPTIONS, FUNCTIONS AND INDICATORS for more

information.

• If “Drying time” or “Airing” programme was selected:

To adapt the drying or airing time,

- press the Drying time button

- adjust the desired drying or airing time by pressing the

drying time button repeatedly, or alternatively by pressing the UP or

DOWN key.

Conrm the selected duration by pressing the OK key.

5. START PROGRAMME

• Press and hold Start/Pause until the button lights up

solidly. After a short load sensing phase, the drying process

starts.

• The display indicates the remaining programme duration and the

current programme phase.

• The duration can be recalculated and adapted in the course of the

programme. During such phases, the display indicates the sensing

phase, and an animation is shown on the control panel.

6. CHANGE THE SETTINGS OF A RUNNING PROGRAMME,

IF NEEDED

You can still change some settings after a programme was started:

Adjust drying time (only if programme Drying time or Airing is

selected).

Adjust or cancel “Finish in”, if a delay was selected and started.

Add or cancel an option, provided the progress of the programme

still allows it.

• Press the relevant button. The selected setting will blink for a few

seconds.

• While blinking, you can adjust the setting by pressing the UP or

DOWN key. If the value or setting stopped blinking, press the

button again.

• Press the OK key to conrm the modication. If you do not

conrm, the modication will be conrmed automatically – the

modied setting will stop blinking after a while.

The programme will continue automatically.

To change the settings of a running programme or delay, you can

also:

• Press Start/Pause to put the running programme on pause

• Change your settings

• Press Start/Pause again to continue the programme.

7. RESET A RUNNING PROGRAMME, IF NEEDED

• Press and hold the On/O button until the display indicates

that the programme is cancelled.

• Immediately open the door and unload the laundry, so that

eventual heat in the laundry can dissipate.

8. SWITCH OFF THE DRYER AFTER PROGRAMME END

• The display indicates that the cycle has nished. Press On/

O to switch o the dryer. Open the door and take out the

laundry.

• The dryer will switch o automatically in about a quarter of an

hour after programme end, to save energy.

• If not switched o right after programme end, the dryer will

tumble the laundry for about 10 minutes, to avoid creasing.

The display alternately indicates the programme end and the

anti-crease phase. This phase can be ended by either switching of

the dryer as mentioned above, or by opening the dryer door.

9. EMPTY WATER TANK / CLEAN DOOR FILTER / CLEAN

BOTTOM FILTER

• Refer to section CARE AND MAINTENANCE.

Specyfikacje produktu

Marka:	Whirlpool
Kategoria:	Suszarka bębnowa
Model:	HSCX 10444

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whirlpool HSCX 10444, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Suszarka bębnowa Whirlpool

Whirlpool 3RAWZ481E Instrukcja

14 Października 2024

Whirlpool WED7800XW Instrukcja

13 Października 2024

Whirlpool WGD5720RW Instrukcja

9 Października 2024

Whirlpool WGD5720RR Instrukcja

9 Października 2024

Whirlpool FFT B CM11 8X B FR Instrukcja

8 Października 2024

Whirlpool W7X D95WR IT Instrukcja

7 Października 2024

Whirlpool HSCX 10444 Instrukcja

7 Października 2024

Whirlpool HDLX 80412 Instrukcja

7 Października 2024

Whirlpool W6 D93WB EE Instrukcja

7 Października 2024

Whirlpool W7 D94WB PL Instrukcja

7 Października 2024

Instrukcje Suszarka bębnowa

Najnowsze instrukcje dla Suszarka bębnowa

Asko T410HD.W.AU Instrukcja

15 Października 2024

Bosch WTH8300CNL Instrukcja

15 Października 2024

Adler AD 2279 Instrukcja

15 Października 2024

Haier HWD90-B14959NU1 Instrukcja

15 Października 2024

Haier HWD100-B14959S8NU1 Instrukcja

15 Października 2024

Haier HWD100-B14959NU1 Instrukcja

15 Października 2024

Haier HWD80-B14959S8NU1 Instrukcja

15 Października 2024

Teka THPD80 Instrukcja

15 Października 2024

Indesit IDV 75 B K (UK) Instrukcja

14 Października 2024

Indesit YT M11 82 X UK Instrukcja

14 Października 2024