Instrukcja obsługi Whirlpool FT M22 9X2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool FT M22 9X2 (4 stron) w kategorii suszarka. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
EN
Quick guide
Before using the appliance carefully read the Safety Instructions.Before using the appliance carefully read the Safety Instructions.
PROGRAMS
Eco cotton kg Max*
Standard cotton programme, suitable to dry normally wet cotton
laundry. Most ecient programme in terms of energy consumption
for drying cotton laundry. The values on the Energy Label are based on
this programme.
Mixed kg 4
This programme is ideal for drying cotton and synthetic fabrics
together.
Bed linen Kg Max*
This programme is intended for drying cotton sheets.
Shirts kg 3
This is a programme for Shirts made from cotton or cotton
blend/synthetics.
Sport kg 4
For drying sports garments made of synthetics or cotton.
Duvet
Programme intended to dry bulky garments, as single duvet.
Jeans kg 3
For drying cotton jeans-wear and garments made of robust
cotton, like denim, such as trousers and jackets.
Easy ironing
This cycle allows to extend the bres of garments thus making
ironing and folding easier. Do not use in case of garments that are
still wet. Suitable for small loads of cotton textiles or cotton blends.
Refresh
A short programme suitable for refreshing bres and garments by
means of fresh air. Do not use with garments that are still wet. It can be
used on with any load size but is more eective with small loads. The
cycle duration is about 20 minutes.
FIRST TIME USE
Make sure that the water tank is correctly inserted. Make sure
that the drain hose on the back of the dryer is xed correctly,
either to the dryer’s water tank, or to your domestic sewage
system.
The dryer should be installed in environment in a room
temperature range of 20°to 23°C for optimum performance. But
will function if the room is between 14 and 30°C. Before you use
your dryer ensure that it has been in a upright position for at
least 6 hours.
DAILY USE
Doing this will keep your machine working at its BEST!
Remember to empty your water tank after each drying cycle.
Remember to clean your lters after each drying cycle. (Refer
to section Care & Maintanence).
1. Open the door and load garments. Always refer to instructions
on clothing labels and the max loads indicated in the programme
section. Empty pockets. Make sure garments do not get caught
between the door and/or the door lter.
2. Close the door.
3. Press the button On/O.
4. Select the programme according to the laundry type.
5. Select the options, if necessary.
6. To start the cycle, press the Start/Pause button.
7. At the end of the drying cycle, a buzzer will beep. An indicator on
the control panel signals the end of the cycle. Pull the load out
immediately to prevent the formation of creases on laundry
8. Turn the machine o by pressing the button On/O, open the
door and pull clothing out. If the machine is not switched o
manually, after about a quarter of an hour from the cycle end, the
appliance turns o automatically to save energy.
If this last stage is not carried out immediately, some machines
and/or some programmes/options are equipped with Crease Care
system. For some hours, after the end of drying, the drum rotates
at regular intervals to prevent the formation of creases. In case of
power failure, it is necessary to press the button Start/Pause to
restart the cycle.
OPENING OF THE DOOR DURING THE CYCLE
During operation, it is possible to open the door. After having
closed it, press the button Start/Pause again to restart the dryer.
*MAX LOAD 9 Kg (Dry load)
CARE LABEL
Always check the care labels, especially when placing garments in
the tumble dryer for the rst time. Below are the most commonly
used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.
CONTROL PANEL
1 ON/OFF button (Reset if long pressed)
2 Programme selection Knob
3 Start/Pause
Options Buttons*
4 Cycle end
5 High heat
6 Anti tangle (Mute if long pressed)
7 Dryness level
8 Start lelay
9 Timed drying
10 Rapid (Key lock if long pressed)
11 Gentle
12 Fresh care+ *Note: some models may have the wording in full instead of the icons
INDICATORS
Dryness level: Iron dry - Hanger dry - Cupboard dry - Extra dry
Cycle phase: Drying - Cool down - End of cycle
Empty water tank - Clean door lter - Clean bottom lter
Refer to troubleshooting section: Failure: Call after sales service
DEMO
Demo mode.
1
3
2
12
10
11
7 8 9
3“
3“
h
6
5
4
OPTIONS BUTTONS
These buttons serves to personalise the selected programme
according to personal requirements. Not all options are available
for all programmes. Some options are incompatible with the
ones previously set. The buzzer and/or blinking indicators will
signal the incompatibility. If the option is available, the option
indicator will stay on. Some options may be kept in the memory
of the programme if selected in the previous drying.
Rapid 30' kg 0,5
Ideal for drying cotton garments spun at high speed in the
washing machine.
Coloured kg Max*
Programme for gentle drying suitable for coloured garments.
Silk kg 0,5
Gentle drying of silk garments.
Wool kg 1
Programme for drying wool clothing. It is advisable to turn
the garments inside out before drying. Leave to dry naturally the
heaviest edges that are still damp.
Delicates kg 2
For drying delicate laundry which needs gentle treatment.
Synthetics kg 4
For drying laundry made of synthetic bres.
OPTIONS
After selecting the programme, the various options can be
set, if necessary.
Dryness level
Press the related button several times to obtain a dierent
level of residual moisture on garments. An indicator signals the
level being selected.
Iron dry: a very delicate ironing. Suitable for making ironing of
garments easier immediately after the end of the cycle.
Hanger dry: a level intended for delicate garments ready to
be hanged.
Cupboard dry: the garments are ready to be folded and put
away.
Extra dry: used for garments to be worn at the end of the
cycle.
Timed drying
This option allows to set the drying time. Press the
corresponding button to set the required time for drying. An
indicator on the control panel signals the time being selected.
h
Start delay
This option allows you to set the delay of the cycle start. Press
the corresponding button several times to obtain the required
delay. After having reached the max. settable time, the option is
reset by pressing the button again. An indicator on the control
panel signals the time being selected. After having pressed the
button Start/Pause, the machine signals the remaining time
for the cycle start. In case of door opening, after closing, it is
necessary to press the button Start/Pause.
Rapid
Enables quicker drying.
Fresh care+
If garments are left inside the drum after the end of the
cycle, they are subject to bacterial proliferation. This option allows
to prevent this proliferation by controlling the temperature and
the rotation of the drum. This treatment has a max. duration of 6
hours after the end of the programme set. This option remains in
memory if selected in the previous drying.
If this option is used together with the Start Delay, a crease
treatment (a periodic rotation of the drum) is added in the Start
Delay phase.
Key lock
This option makes all machine controls inaccesible, except the
button On/O. When the machine is on: to activate the option,
keep the button pressed until the indicator goes on. To disable the
option, keep the button pressed until the indicator goes o. This
option remains in memory if selected in the previous drying.
Cycle end
This option activates a prolonged buzzer at the end of the
cycle. Enable it if you are not sure to hear the normal sound at the
end of the cycle. This option remains in memory if selected in the
previous drying.
Mute
This option turns o all sounds of control panel. Only
warnings remain active.
• to activate the option, keep the button pressed until the
indicator goes on.
• to disable the option, keep the button pressed until the indicator
goes o.
High heat
It improves the drying capacity. Option suitable for drying
tough garments, it is used with timed cycles.
Anti tangle
This option has the drum movement modied to give a
tumbling action that reduces tangling and knotting of your
clothes. This option gives best results when used with smaller
loads.
Gentle
Enables a more gentle treatment of the laundry by reducing
the drying temperature.
The wool drying cycle of this machine
has been approved by The Woolmark
Company for the drying of wool gar-
ments labelled as “hand wash” provided
that the garments are dried according
to the instructions issued by the ma-
nufacturer of this machine. Follow the
garment care label for other laundry
instructions. . The Woolmark symbol is a Certi cation mark in
many countries.
M1762
The duration of these programs will depend on the size of the
load, types of textiles, the spin speed used in your washer and
any extra options selected. In machines equipped with display,
the duration of the cycles is shown on the control panel. The
remaining time is constantly checked and adjusted during the
drying cycle to show the best possible estimate.
EN
Quick guide
Heat Pump System
The heat pump contains uorinated greenhouse gases,
contained in a hermetically sealed unit. This sealed unit contains
0,18 kg of the F gas R134a. GWP = 1430 (1 t CO2).
Power consumption
o-mode (Po) - Watts 0.50
left-on mode (Pl) - Watts 1.00
Programs MinutesKg kWh
Eco Cotton * 9 2.07 211
Eco Cotton 4.5 1.19 131
Synthetics 4 0.73 95
*This is the reference programme for the energy label and suitable to
dry normal wet cotton laundry. This is the most ecient programme
in terms of energy consumption for drying wet cotton laundry.
(Standard/Default starting conguration)
TRANSPORT AND HANDLING
Never lift the dryer by holding it at the worktop.
1. Unplug the dryer.
2. Make sure that door and water tank are properly closed.
3. If the drain hose is connected to your sewage system, x the
drain hose on the rear of the dryer again (see Installation Guide).
A B
1
42
3
C
CARE AND MANTENANCE
Unplug the dryer during the cleaning and maintenance
procedures.
Emptying the water tank after each cycle (see Fig. A).
Pull the container out of the dryer and and empty it into a
sink or other suitable drain, then place it back. Do not use the dryer
without having inserted the container back in place.
Cleaning the door lter after each cycle (see Fig. B).
Pull the lter out and clean it by removing the lint from the
lter surface under running water or using a vacuum cleaner. For
optimal performance, dry up all the lters before inserting them
back in place. Do not use the dryer without having reinserted the
lter in place.
Remove the door lter as described below:
1. Open the door and pull upwards.
2. Open the lter and remove lint from all its parts. Replace it
correctly.
Ensure it is completely inserted ush with the dryer seal.
Cleaning the bottom lter when the relevant indicator
turns on (see Fig. C).
Pull the lter out and remove the lint from its surface by washing
it under runing water or by using a vacuum cleaner.
However, it is advisable to clean this lter after each cycle to
optimise drying performance. Do not use the dryer without
having inserted the lter in place rst.
Remove the bottom lter as described below:
1. Open the lower door.
2. Take the handle and pull the lower lter out.
3. Open the rear side of the lter and remove the lint from the
inner surface of the mesh.
4. Clean the bottom lter chamber avoiding the direct contact
with the leaves.
5. Close the rear side of the lower lter and place it back by
checking it is perfectly integrated in place.
6. Lower the lter handle and close the bottom door.
7. Make sure the air intake is free.
The lters are essential parts for drying. They are intended
to collect the lint formed during drying process. In case
of clogged lters, the air ow inside the dryer would be
seriously aected: the drying times would be longer, the
energy consumption would increase and the dryer could be
damaged. If these procedures are not carried out properly,
the dryer may not start.
PRODUCT DESCRIPTION
1. Water Tank
2. Air Intake
3. Bottom lter
4. Door lter
Specyfikacje produktu
| Marka: | Whirlpool |
| Kategoria: | suszarka |
| Model: | FT M22 9X2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Whirlpool FT M22 9X2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje suszarka Whirlpool
28 Maja 2024
27 Maja 2024
27 Maja 2024
25 Maja 2024
21 Maja 2024
21 Maja 2024
20 Maja 2024
15 Maja 2024
13 Maja 2024
7 Maja 2024
Instrukcje suszarka
- suszarka Samsung
- suszarka Electrolux
- suszarka AEG
- suszarka Beko
- suszarka Teka
- suszarka LG
- suszarka Smeg
- suszarka Gram
- suszarka Amica
- suszarka Gorenje
- suszarka Cookology
- suszarka Bosch
- suszarka Candy
- suszarka Miele
- suszarka Midea
- suszarka Lamona
- suszarka Panasonic
- suszarka Hoover
- suszarka Maytag
- suszarka GE
- suszarka Siemens
- suszarka Grundig
- suszarka Haier
- suszarka Remington
- suszarka Fisher & Paykel
- suszarka Indesit
- suszarka Hotpoint
- suszarka Amana
- suszarka Hotpoint Ariston
- suszarka Corbero
- suszarka Zanussi
- suszarka Continental Edison
- suszarka SVAN
- suszarka AEG-Electrolux
- suszarka Omega
- suszarka VOX
- suszarka Vedette
- suszarka Frigidaire
- suszarka Daewoo
- suszarka SanGiorgio
- suszarka Magic Chef
- suszarka Constructa
- suszarka Proline
- suszarka KDK
- suszarka Speed Queen
Najnowsze instrukcje dla suszarka
26 Września 2024
23 Września 2024
22 Września 2024
17 Września 2024
17 Września 2024
5 Września 2024
9 Lipca 2024
9 Lipca 2024
9 Lipca 2024
8 Lipca 2024