Instrukcja obsługi Whirlpool CGT9100GQ

Whirlpool pralka CGT9100GQ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool CGT9100GQ (2 stron) w kategorii pralka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
Quick Start Guide
Setting Up and Using Your High-Efciency
Commercial Stacked Washer/Dryer
CONNECT NEW INLET HOSES
TO FAUCETS
1
CONNECT INLET HOSES
TO WASHER AND
CHECK FOR LEAKS
3
Do not overtighten or use tape or
sealants when attaching to faucets.
Make sure that both hot
and cold water hoses are
connected to the correct
faucets. The washer will
not operate unless both
hoses are connected.
IMPORTANT:
Make sure that water
faucets are turned on
fully before using the
washer for the rst time.
If there is no/low water
pressure to the washer,
the display will scroll “lo h2O”. To clear, open
and close the washer door.
4
CLEAR WATER LINES
2
Do not
overtighten
or use tape
or sealants
when attaching
to washer.
KEY AND COIN BOX*
LOCATION OF KEY
Coin box key (shown) comes
taped to coin box lock.
Document the key code
(engraved on coin box key)
in a safe place.
If key is lost, contact
1-800-221-0982 x200 or
x154 for replacement
(not covered by warranty). Have key code
handy; otherwise, a locksmith will have
to drill out coin box and a replacement
coin box (part no. W11190039) will have
to be installed.
*Applies only to select models.
W11189593A
W11189594A - SP
CONNECTING WATER /SECURING DRAIN HOSE
Make sure that the washer/dryer is level (see the “Leveling Stacked Washer/Dryer” section in the
Installation Instructions). Run a wash cycle to verify that the washer is working correctly and has no
leaks at faucets and inlet hoses.
Insert new hose washers
(in separate bag) into each end of
inlet hoses. Firmly seat washers into
couplings.
Turn on
faucets and
check for
leaks at both ends of hoses.
Position the washer/dryer so that the rear
is within approximately 3 feet (900 mm)
of its nal location.
Keep the washer/dryer in
the upright position; using
a 1/2" wrench, loosen each
of the four shipping bolts
on the rear panel. Once
each bolt is loose, move
it to the center of the
hole and completely pull
out the bolt, including
the plastic spacer. Discard
the bolts and spacers. Close the bolt holes
with the four transport bolt hole plugs.
REMOVING SHIPPING BOLTS
Install and secure the
drain hose in a manner
that will avoid it coming
out of or leaking from the
plumbing/drain.
Do not seal or
put more than
4.5" (114 mm)
of the drain hose
into drainpipe or standpipe.
5
114 mm
(41/2")
4½"
(114 )mm
and/or
Quick Start Guide
Plug in washer/dryer
or connect power.
“SYNC” will be
displayed for less
than 1 minute.
SETTING UP THE WASHER/DRYER
W11189593A
W11189594A - SP
©2017 All rights reserved.
12/17
For coin drop use,
match the wash price
on the display to the
number of coin 1s for
Regular cycle price
and the Value of coin 1.
See the Installation Instructions for programming details.
Wash price Regular cycle price
(number of coin 1s)
Value of coin 1
(number of nickels)
For a suggested setup, see the “User & Set-Up Instructions” section of the Installation Instructions.
NOTE: To minimize the potential of oversudsing, follow this recommended setup:
• Add a two-minute prewash length (see the “User & Set-Up Instructions” section of the
Installation Instructions).
• Shake out clothing prior to loading.
• Zip all zippers.
• Use the recommended amount
of HE detergent.
• If a detergent pod is used, toss it into the
wash drum, not into the dispenser.
• Use chlorine bleach only.
• Fabric softener must be diluted.
NOTE: The washer remains locked for the entire
wash cycle.
IMPORTANT WASH TIPS
Fire Hazard
Never place items in the washer that
are dampened with gasoline or other
flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any
type of oil on it (including cooking oils).
Doing so can result in death, explosion,
or fire.
CHANGING COIN DROP
PRICING (Applies only
to select models)
Refer to Installation
Instructions for
detailed instructions
located in the
washer/dryer.
NOTE: Coin box needs
to be emptied frequently
to avoid jams and damage.

Specyfikacje produktu

Marka: Whirlpool
Kategoria: pralka
Model: CGT9100GQ

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whirlpool CGT9100GQ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje pralka Whirlpool

Whirlpool

Whirlpool 3LA5700XK Instrukcja

14 Października 2024
Whirlpool

Whirlpool WFW9250WR Instrukcja

10 Października 2024
Whirlpool

Whirlpool BI WDWG 961484 Instrukcja

9 Października 2024
Whirlpool

Whirlpool WFW5720RW Instrukcja

9 Października 2024
Whirlpool

Whirlpool WFW6720RW Instrukcja

9 Października 2024
Whirlpool

Whirlpool FFB D96 BV IT Instrukcja

9 Października 2024
Whirlpool

Whirlpool FFS 8469 BV BE Instrukcja

9 Października 2024
Whirlpool

Whirlpool FFB 9489 BV SPT Instrukcja

9 Października 2024
Whirlpool

Whirlpool FFB 9469 WV BE Instrukcja

9 Października 2024
Whirlpool

Whirlpool FFB 8469E WV BE Instrukcja

9 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy

Candy CS 15102D3-80 Instrukcja

15 Października 2024
GE

GE GSD3715FAA Instrukcja

15 Października 2024
Siemens

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024
LG

LG WTP22BK Instrukcja

15 Października 2024
Freggia

Freggia WTIE148 Instrukcja

15 Października 2024
Freggia

Freggia WISE126R Instrukcja

15 Października 2024
Freggia

Freggia WISE126B Instrukcja

15 Października 2024
Freggia

Freggia WISE126 Instrukcja

15 Października 2024
Freggia

Freggia WISA105 Instrukcja

15 Października 2024
Freggia

Freggia WISA106 Instrukcja

15 Października 2024