Instrukcja obsługi Whirlpool BI WDWG 861484

Whirlpool pralka BI WDWG 861484

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool BI WDWG 861484 (4 stron) w kategorii pralka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
GB
Quick Guide
CONTROL PANEL
WASH CYCLE TABLE
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance,
please register your product on
www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction.
Before using the machine, it is imperative that the transport bolts are removed.
For more detailed instructions on how to remove them, see the Installation Guide.
PRODUCT DESCRIPTION
1. Worktop
2. Detergent dispenser
3. Control panel
4. Door handle
5. Door
6. Water lter
7. Adjustable feet (4)
DETERGENT DISPENSER
Compartment 1: Pre-wash detergent
(powder)
Compartment 2: Washing detergent
(powder or liquid)
Compartment 3: Additives (fabric softeners,
etc.)
The fabric softener must not exceed the “MAX”
level.
! Use powder detergent for white cotton
garments, for pre-washing, and for washing at
temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
3
1.
3.2.
5.
4.
6.
7.
Maximum load 8 kg
Power input in o mode 0,5 W / in left-on mode 8 W
Detergents and
additives
Recommended
detergent
Residual
dampness % (***)
Energy
consumption kWh
Total water lt
Laundry
temperature °C
Programme
Temperatures Max.
spin
speed
(rpm)
Dry-
ing
Max. load
for wash
cycle (kg)
Max. load
for drying
cycle (kg)
Duration
(h : m)
Prewash Main Softener
Powder Liquid
Setting Range 1 2 3
MIXED 40°C - 40°C 1000 8,0 6,0 ** - - – –
COTTON2 40°C - 60°C 1400 8,0 6,0 3:55 - 49 1 90 40
SYNTHETICS 3 40°C - 60°C 1200 4 4 2:55 - 35 0,75 55 43
RAPID 30’ 30°C - 30°C 800 - 4,5 4,5 0:30 - - 71 0,2 45 27
20°C 20 °C - 20 °C 1400 8,0 6,0 1:50 - - 49 0,16 90 22
WASH&DRY 45’ 30°C 30°C 1400 1,0 1,0 ** - - – –
WASH & DRY 90’ 30°C 30°C 1200 2,0 2,0 ** - - – –
SPIN & DRAIN * - - 1400 8,0 6,0 ** - - - - - – –
RINSE & SPIN - - 1400 8,0 6,0 ** - - - - – –
WHITE 60°C - 90°C 1400 8,0 6,0 2:45 (90°) 49 0,9 90 55
ECO 40-60 (1) 40 °C 40°C
1351 8,0
6,0
3:30 - 53 0,77 54 33
1351 4,0 2:45 - 53 0,65 52 36
1351 2,0 2:10 - 53 0,45 37 33
WOOL 40°C - 40°C 800 2,0 2,0 ** - - – –
DELICATES 30°C - 30°C 0 1,0 1,0 ** - -
COLOURS 15° 15°C 15°C 1000 4,5 4,5 ** - - – –
  Required dosage Optional dosage
ECO COTTON 4 60 °C 60 °C 1400 8,0 6,0 3:45 - 53 1,04 60
1. On/O button
2. Programme selector
3. Start/Pause button
4. Temperature button
5. FreshCare+ button
6. Dry Only button / Lock button
7. Drying settings button
8. Display
9. Start delay button
10. Spin speed button
21 93
4
10 6
5
7
8
DISPLAY INDICATORS
Washing phase
Indicates washing phase of the cycle
Drying phase
FreshCare+ activated
Key lock activated
Drying only
Timer drying mode
Drying automatic levels
Start delay activated
Door locked
Note: spin speed values shown on the display can slightly differs from the values stated in the table.
2) Long cotton programme: set the “ programme with a temperature of 40°C.
3) Synthetic program along: set the “ programme with a temperature of 40°C.
* Select the programme and set the spin speed to “ to empty only.0
** The duration of the programme is shown on the display.
***
After programme end and spinning with maximum selectable spin speed, in default
programme setting.
6th Sense - the sensor technology adapts water, energy and programme duration to your wash load.
4) Eco Cotton -
Test wash cycle in compliance with regulations 1061/2010. Set
wash
cycle at a temperature of 60°C to access this cycles.
For wash programmes with temperatures above 50°C, we recommend using powder detergent
rather than liquid, and following the directions given on the detergent package.
This data may dier in your home due to changing conditions in inlet water temperature,
water pressure etc. Approximate programme duration values refer to the default setting of
the programmes, without options.
The values given for programmes other than the Eco 40-60
programme are indicative only.
For all Test Institutes
1) Eco 40-60 (Wash)- Test wash cycle in compliance with EU Ecodesign regulation 2019/2014.
The most efficient programme in terms of energy and water consumption for washing normally soiled
cotton laundry.
Eco 40-60 (Drying)-
Test wash cycle in compliance with EU Ecodesign regulation
2019/2014
. To access “wash and dry” cycle select “Eco 40-60 wash programme and set
“Drying” option leval to
.
The most ecient programme in terms of energy and water
consumption for washing and drying normally soiled cotton laundry.
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic bres and mixed bres.
Cotton
for washing normally to heavily soiled towels, underwear, table and bed
linen etc. in resilient cotton and linen.
Synthetics
for washing normally soiled garments made from synthetic bres (such as
polyester, polyacrylic, viscose etc.) or cotton/synthetic blends.
Rapid 30
for washing lightly soiled garments quickly: this cycle lasts only 30 minutes,
saving time and energy. Maximum load 3,5 Kg.
20 °C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Wash&Dry 45’
for washing and drying lightly soiled cotton and synthetic bre garments
quickly. This cycle washes and dries a laundry load of up to 1 Kg in just 45
minutes.
Wash & Dry 90’
for washing and drying cotton and synthetic bre garments quickly. This
cycle washes and dries a laundry load of up to 2 Kg in just 90 minutes.
Spin & Drain
spins the load then empties the water. For resilient garments.
Rinse & Spin
rinses and then spins. For resilient garments.
White
For washing normally to heavily soiled towels, underwear, table and bed linen,
etc in resilient cotton and linen. Only when the temperature is selected at 90°C
the cycle is provided with a prewash phase before main washing phase. In this
case it is recommended to add detergent both, in the prewash and main wash
section.
Eco 40-60
For washing normally soiled cotton garments declared to be washable at
40 °C or 60 °C, together in the same cycle. This is the standard cotton
programme and the most ecient in terms of water and energy
consumption.
Wool
All wool garments can be washed using programme ‚“Wool“ even those
carryng the “hand-wash only “ label. For best results, use special detergents
and do not exceed max kg declaration of laundry.
Delicates
for washing particularly delicate garments. Preferably turn garments inside
out before washing.
Colour 1
This cycle helps protect colours by washing in cold water (15°C) and uses
less energy to heat the water while still oering satisfactory wash results.
Suitable for lightly soiled, ustained garments. This cycle oers wash results
comparable to 40°c mixed at just 15°C
Eco Cotton
For washing normally soiled cotton garments at 60°C.
Door locked indicator
if the symbol is o the door is locked. To prevent any damage, wait
until the symbol turns on before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is lit, the door can be opened.
FIRSTTIME USE
Once the appliance has been installed, and before you use it for the rst time,
run a wash cycle with detergent and no laundry, using the wash cycle (60°).
DAILY USE
Prepare the laundry by following the suggestions appearing under the
TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; the START/PAUSE indicator light will
ash slowly.
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the Wash Cycle Table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments as described in “DETERGENT DISPENSER DRAWER”
section.
- Close the door.
- Use the WASH CYCLE selector knob to select the desired wash cycle: it
will be associated with a specic temperature and spin speed that can be
modied. The duration of the cycle will appear on the display.
- The machine automatically displays the default temperature and spin
speed values for the selected cycle, or the most recently used settings if
they are compatible with the selected cycle.
- Select the drying cycle if desired.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the relative
indicator light will light up steady and the door will lock ( symbol o).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the
indicator light will ash. If the symbol is lit, the door may be opened. To
start the wash cycle from the point at which it was interrupted, press the
START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns o to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle; the
indicator light will ash. If the symbol is lit, the door may be opened.
Press the START/PAUSE button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button (the relative indicator light will ash), then
select the desired cycle and press the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch o.
END OF THE CYCLE
This will be indicated by the word “END on the display; when the
symbol switches on, the door may be opened. Open the door, unload the
laundry and switch o the machine. If you do not press ON/OFF”
button, the washing machine will switch o automatically after about a
10 minutes. Close the water tap, open the door and unload the washing
machine. Leave the door ajar to allow the drum to dry.
OPTIONS
! If the selected option is incompatible with the programme set, the
incompatibility will be signalled by a buzzer and the corresponding
indicator light will ash.
! If the selected option is incompatible with another previously set
option, only the most recent selection will remain active.
Freshcare+
If associated with wash cycles, this option increases their performances by
generating steam to block proliferation of the main sources of unpleasant
odours inside the appliance (exclusively for the wash). After the steam
phase, the machine runs a delicate cycle with slow drum rotations. When
the Freshcare+ option is associated with drying cycles, it prevents
stubborn creases from stabilising on garments, thanks to slow drum
rotations.
The FreshCare+ cycle starts at the end of the wash or drying cycle and
continues for maximum 6 hours; it can be interrupted at any time by
pressing any button on the control panel, or by turning the knob. Wait
roughly 5 minutes before opening the door.
h.
Start Delay
To set the selected programme to start at a later time, press the button to
set the desired delay time. The
h.
symbol lights on the display when this
function is enabled. To cancel the delayed start, press the button again
until the value “0” is shown on the display.
Temperature
Each wash cycle has a pre-dened temperature. To modify the
temperature, press the button. The value will appear on the display.
Spin
Each wash cycle has a pre-dened spin speed. To modify the spin speed,
press the button. The value will appear on the display.“ ”
Setting the drying cycle
The rst time the button is pressed, the machine will automatically “ ”
select the maximum drying cycle which is compatible with the selected
wash cycle. Subsequent presses will decrease the drying level and then the
drying time, until the cycle is excluded completely (“OFF”).
Drying may be set as follows:
A- Based on the desired laundry dryness level:
Cupboard : suitable for laundry which can be put back in a cupboard
without being ironed.
Hanger : ideal for clothes which do not need to be dried fully.
Iron : suitable for clothes which will need ironing afterwards. the
remaining dampness softens creases, making them easier to remove.
B - Based on a set time period: between 210 and 30 minutes.
If your laundry load to be washed and dried is much greater than the
maximum stated load (see adjacent table of wash cycles), perform the
wash cycle, and when the cycle is complete, divide the garments into
groups and put some of them back in the drum.
At this point, follow the instructions provided for a ” cycle. Drying only
Repeat this procedure for the remainder of the load. Note: a cooling-down
period is always added to the end of each drying cycle.
Drying only
Press button to perform the drying-only cycle. After selecting the
desired cycle (compatible with the type of garments), press button
to exclude the washing phase and start the drying phase at the maximum
level for the selected cycle. The drying level or time may be set and
changed by pressing the drying button “ ”.
CHILD LOCK
to lock the control panel, press and hold the button for “ ”
approximately 3 seconds. the symbol lights on the display to indicate
that the control panel is locked (with the exception of the button). This
prevents unintentional changes to programmes, especially with children
near the machine.
If any attempt is made to use the control panel, the symbol ashes on
the display.
To unlock the control panel, press and hold the button for
approximately 3 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed bres, synthetics, wool, garments to be
hand-washed). Colour (separate coloured garments from whites, wash
new coloured garments separately). Delicates (small garments – such as
nylon stockings – and items with hooks – such as bras: insert them in a
fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and
the drum. Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of surplus
detergent
Use low temperature and longer duration
The most ecient programmes in terms of energy consumption are
generally those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the
“PROGRAMME CHART table to save water and energy.
Noise and remaining moisture content
They are inuenced by the spinning speed: the higher the spinning speed
in the spinning phase, the higher the noise and the lower the remaining
moisture content.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washing machine
o and disconnect it from the mains power. Do not use ammable liquids to
clean the washing machine. Clean and maintain your washer - dryer
periodically (at least 4 times per year).
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all
maintenance work.
Clean the washing machine
The outer parts and rubber components of the appliance can be cleaned
using a soft cloth soaked in lukewarm soapy water. Do not use solvents or
abrasives.
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated
frequently.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant
odours from forming.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken, it
must be replaced: during wash cycles, the high pressure of the water
could suddenly split the hose open.
! Never use hoses that have already been used.
Cleaning the water lter / draining residual water
Switch o and unplug the washing machine, take out the kitchen
plinth before cleaning the water lter or draining residual water.
The kitchen plinth must be mounted back all the time once the cleaning
operation is over.
If you used a hot wash programme, wait until the water has cooled
down before draining any water. Clean the water lter regularly, to
avoid that the water cannot drain after the wash due to obstruction of
thelter. If the water cannot drain, the display indicates that the water
lter may be clogged.
1 . Place a container close to the pump to collect any spillage.
2 . Remove, pulling it out, the emergency drain hose from the
base of the washing machine .
Remove the stopper of the emergency drain hose” at the end of the
hose and let the water ow into the container.
3 . Turn the exhaust lter handle and pull it out of the housing .
When the container of plinth is full with water, plug the stopper to
the hose end, and reinsert the small hose in the washing machine’s
base . After, empty the container .
Afterwards rmly close the emergency drain hose with the stopper .
4. Remove lter: Lay a cotton cloth beneath the water lter, which
can absorb a small amount of rest water . Then remove the water
lter by turning it out anticlockwise .
5 . Clean the water lter: remove residues in the lter and clean it
under running water .
6 . Insert the water lter: Reinsert the water lter again by turning
it in clockwise direction . Make sure to turn it in as far as it goes; the
lter handle must be in vertical position . To test water tightness
of the water lter, you can pour about 1 liter of water into the
detergent dispenser .
1
2
Then reinstall the kitchen plinth.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every spin and
to distribute the load in a uniform manner, the drum rotates continuously
at a speed which is slightly greater than the washing rotation speed. If,
after several attempts, the load is not balanced correctly, the machine
spins at a reduced spin speed. If the load is excessively unbalanced, the
washing machine performs the distribution process instead of spinning. To
encourage improved load distribution and balance, we recommend small
and large garments are mixed in the load.
TRANSPORT AND HANDLING
Do not lift the washing machine by gripping it from the upper section.
Unplug the appliance and close the water tap. Check that the door and
detergent dispenser drawer are tightly closed. Detach the lling hose
from the water tap then detach the drain hose. Empty all the water
remaining in the hoses and secure the latter so that they do not get
damaged during transport. Apply the transport bolts back on. Repeat, in
reverse order, the transport bolt removal procedure described in the
“Health & Safety and Installation Guides”.


Specyfikacje produktu

Marka: Whirlpool
Kategoria: pralka
Model: BI WDWG 861484

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whirlpool BI WDWG 861484, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje pralka Whirlpool

Instrukcje pralka

Najnowsze instrukcje dla pralka