Instrukcja obsługi Whirlpool AWU612

Whirlpool pralka AWU612

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Whirlpool AWU612 (4 stron) w kategorii pralka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
TRAHCEMMARGORP
Whirlpool is a registered trademark of Whirlpool USA
: optional / Yes : dosing required
1) For improved garment care, spin speed is restricted in these programmes.
The “wool” programme of this washing machine has been approved by The Woolmark Company for the washing
of garments labelled as “machine washable”. Follow the instructions given on the label sewn on the garment and
the instructions supplied by the washing-machine manufacturer. (Cert. no. M0402-M0403-M0404-M0405).
Programme Tempe-
rature
Care
Labels
Max.
Load
kg
Type of wash/Notes
- For temperature selection, respect the manufacturer’s recommendations on
the care label
Detergents and additives Special functions Max.
spin
speed
rpm
Pre-
wash
Main
wash
Softener Start
delay
Drying
time
Pre-
wash
Rapid
wash
Intensive
rinse
Rinse
hold
Variable
spin
White Cotton
Antibacterial 75 - 90 °C 6.0 Normally to heavily soiled bed linen, table linen and underwear, towels,
shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria,
ensuring sanitization of your laundry. The bacteria removal efficiency has
been tested following a similar methodology to the NF EN 13697 standard
of Nov. 2001.
Ye s Max.
Cotton
60 °C 6.0
30 - 40 °C 6.0
Synthetics 30 - 60 °C 3.0 Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton. Ye s 800 1)
Delicates 30 - 40 °C 3.0 Curtains and delicate clothing, skirts, shirts and blouses. —Ye s — — — — 500 1)
Wool 30 - 40 °C 1.5
Only woollens labelled with the Woolmark and identified as machine
washable.
This programme (40°C) is tested and approved by The Woolmark Company
for handwashable wool.
—Ye s — — — — — 800 1)
800 1)
Lingerie Cold —3.0 Curtains and delicate clothing in wool or silk only washable in cold water. —Ye s — — — — —
Quick wash 35 °C 3.0 Outer clothing worn for short periods and made of cotton, polyester,
polyamide and cotton blends. —Ye s —— — — — Max.
Daily load 40 °C 4.0 Slightly to normally soiled garments made of cotton and/or synthetics. Ye s — —— — Max.
Cold wash — — 6.0 Slightly soiled garments in cotton and/or synthetics washable only in cold water. —Ye s Max.
Drying —
4.0
Drying can be carried out using the “Cotton“ programme (with dry laundry
load of 3/4 kg) or the “Synthetics” programme (with dry laundry load of
1.5/2 kg).
— — — — — — — — —
Rinse — — 6.0 Same as the last rinse and the final spin in the “Cotton” programme. — — — — ——Max.
Drain/Spin — — 6.0 In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme. — — — — — — — Max.
The washing machine has automatic
safety functions able to detect and
promptly signal any faults, indicating them
in a suitable way on the display, e.g.:
E02-E03 “Service” indicator
E01 “Clean Pump” indicator
E00 “Water Tap Closed” indicator
E04 “Door lock” indicator
A. Programme selector
B. “Start” button
C. “Variable spin” button
T. “Drying time” button
D. Display: Wash cycle sequence and
functions indicator
O. Optional function buttons
J. “Start delay” button
AWU 608 - AWU 610 - AWU 612 - AWI 312
(AWI 312)
(AWU 612)
3.0
(AWU 608)
(AWU 610)
—
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives”
in the Instructions for Use.
1. Turn the programme selector to the desired
programme.
2. The indicator of the predefined spin speed
lights up; in case you want to set another spin
speed, press the “Variable spin” button.
Press the button(s) of any required option(s) - the
respective indicator lights up.
When the combination of programme and
additional option(s) is not possible,
the indicators switch off automatically. Unsuitable
combinations of options are deselected automatically.
“Prewash” button
tOnly for heavily soiled loads (e.g. sand, granular dirt).
Increases the cycle time by approx. 15 minutes.
tDo not use liquid detergent for the main wash
when activating the prewash option.
“Rapid wash” button
tAllows you reduce the wash times of the
“Cotton” and “Synthetics” programmes; with
this option selected the machine does one less
rinse and disables the prewash function.
“Intensive rinse” button
tMore water is added and the rinse cycle is
prolonged.
t This option is particularly suitable for areas with
very soft water, washing baby linen, and helps
people with allergies.
“Rinse hold” button
tThe laundry remains in the last rinse water
without the final spin cycle, to avoid creasing and
prevent colours from changing.
tThis option is particularly recommended for the
“Synthetics” or “Delicates” programmes.
tIt is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
tIf you select “Rinse hold”, do not leave the
laundry to soak for too long.
Note: The programme stops to “Rinse hold” at
the time the “Rinse Hold” light in the programme
sequence indicator is on. The indicator next to
the “Start” button flashes.
To terminate the “Rinse hold” option:
tPress the “Start” button; the programme will
terminate automatically with the final spin cycle
for the preset wash programme.
“Variable spin” button
tEvery programme has a predefined maximum
spin speed.
tPress the button to set another spin speed.
tIf spin speed “00” is selected, the final spin is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
Press the button to select the drying time, in
automatic mode (at end of wash cycle) or in manual
mode, selecting the “Drying” programme (with
hand-washed laundry). In the latter case it is
CONSUMPTION DATA
Programme Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. programme duration
(hours : minutes)*
White Cotton / Antibacterial 90 6.0 62** 1.70 2:09
Cotton 75 6.0 62 1.33 2:05
Cotton with “Eco”*** 60 6.0 59 0.93 2:07
Cotton 40 6.0 62 0.69 1:51
Synthetics 60 3.0 56** 0.88 1:51
Synthetics 40 3.0 56 0.43 1:39
Dailywash 40 4.0 40 0.39 1:28
Quickwash 35 3.0 30 0.27 0:41
Delicates 30 3.0 54 0.22 0:53
Wool 40 1.5 54 0.39 0:50
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. In domestic use, consumption data
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*The time indicated on the display (if present) can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference programme for energy label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
DRYING TIME
necessary to spin at a speed of at least 800 rpm. The
set time is shown on the display and varies from “00”
to “180” minutes. Drying is not carried out with set
time “00”.
The “Start Delay” option allows you to programme
machine activation at a later stage, for example at night
when electricity is cheaper. Do not use liquid
detergent when activating the “Start delay”.
tSelect the programme and options.
tPress the “Start Delay” button to select
programme start a delay time of 1 to 16 hours;
tPress the “Start” button.
The indicator next to the “Start delay” button
lights up, whereas the selection made is shown
on the display.
Its flashing indicates the countdown of the
remaining time.
tAt the end of the delay time the machine starts
the set programme. The icon indicating the wash
cycle step being carried out at that moment is
displayed.
tAfter pressing the “Start”, the number of hours
preselected can be reduced by pressing and
holding the “Start Delay” button.
To cancel the “Start Delay”:
Press the “Start delay” button until the time
indicated on the display is “00”; the selected
programme will then start.
Open the tap and press the “Start”. The indicator
next to the button lights up.“Start”
At the end of a programme, the message “End”
appears on the display, indicating that the door can
be opened. As long as a wash programme is running,
the door remains locked and must not be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
E02-E03 “Service”
The display of this “Service” code can be due to a
faulty electrical component. Refer to the
“Troubleshooting guide” in the Instructions for Use;
If the fault persists, contact the After-Sales Service.
E01 “Pump cleaning”
The water is not discharged. Check if the drain hose
is bent or if the filter requires cleaning; in the latter
case, refer to the Instructions for Use (“Removing
the filter”).
E00 “Water tap closed”
The washing machine water feed is insufficient or
lacking. Open the tap; Turn the programme
selector to “Off/O” and reset the programme. If the
fault remains displayed, consult the
“Troubleshooting guide” in the Instructions for Use.
E04 “Door open”
The display of this code could be due to the door not
being properly closed. Try closing it again. Turn the
programme selector to “Off/O” and reset the
programme. If the fault remains displayed, consult the
“Troubleshooting guide” in the Instructions for Use.
t At the end of the wash cycle, the message
“END” will appear on the display, indicating
that the door is unlocked.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and remove the washing.
4. Leave the door ajar to allow the drum to dry.
1. Turn the programme selector to “Off/O”.
2. Select the new programme, any options and
another spin speed if you want.
3. Press the “Start” button again. The new
programme resumes the wash programme
from where the previous one was interrupted.
Do not add detergent for this programme.
t Reset by turning the programme selector to
“Off/O” and select the “Drain Spin”
programme to remove the water remaining in
the bowl before the door can be opened.
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATOR
DISPLAY ALPHANUMERIC INDICATIONS
END OF WASH CYCLE
CHANGING PROGRAMME AND/OR
OPTIONS AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
AWU 608 - AWU 610 - AWU 612 - AWI 312
4.0
(AWI 312)
(AWU 612)
3.0
(AWU 608)
(AWU 610)

Specyfikacje produktu

Marka: Whirlpool
Kategoria: pralka
Model: AWU612

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Whirlpool AWU612, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje pralka Whirlpool

Whirlpool

Whirlpool AWE 6720 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool WGD7000D Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool AWO 8166 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool awe 4626 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool awm 5150 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool AWZ 514 D WP Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool awm 256 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool awo d 47116 Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool awo 846 7kg Instrukcja

15 Stycznia 2025
Whirlpool

Whirlpool awo d 6740 Instrukcja

15 Stycznia 2025

Instrukcje pralka

Najnowsze instrukcje dla pralka

Samsung

Samsung p 1453 gw Instrukcja

15 Stycznia 2025
Bauknecht

Bauknecht WA Black 714 BW BK Instrukcja

15 Stycznia 2025
Beko

Beko WTV8814MMC1 Instrukcja

15 Stycznia 2025
Daewoo

Daewoo DWD-FD1441 Instrukcja

15 Stycznia 2025
Indesit

Indesit W 144 XS Instrukcja

15 Stycznia 2025
Beko

Beko WMY71464STR1 Instrukcja

15 Stycznia 2025
Indesit

Indesit WN860WSK Instrukcja

15 Stycznia 2025
AEG-Electrolux

AEG-Electrolux l 88819 Instrukcja

15 Stycznia 2025
AEG-Electrolux

AEG-Electrolux L88489FL Instrukcja

15 Stycznia 2025
Beko

Beko wmd 26145 Instrukcja

15 Stycznia 2025