Instrukcja obsługi Vimar ELVOX 945B

Vimar przełącznik ELVOX 945B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vimar ELVOX 945B (24 stron) w kategorii przełącznik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

945B, 945B/I

Porter’s Switchboard

Installer guide

DESCRIPTION

Porter's switchboard in desk-top version with black thermoplastic housing. This switchboard can call up to 99999999 users

using a 20-key keypad which serves to enter user numbers, make calls, activate intercom or conference functions (excluding

the building complex), release the door lock and for F1-F2 functions and to cancel the operation currently in progress. The

switchboard can store up to 30 different calls (displayed by using the memory scroll button) and is provided with watch (with

time and date) and two wake up functions. Option to manage a printer (use switchboard Art. 945B/I with printer interface)

MANAGING THE DISPLAY (40X2):

The switchboard display is (in its typical operation state) divided in 5 main zones in order to allow an easy and immediate

distinction of all data displayed.

UPPER LINE

3 zones may be distinguished:

Left hand side: display of all outgoing messages, and also particular information signalling.

Centre: display of the number to be dialled (8 digits) or the respective message on its left hand side

Right hand side: display of the current time.

LOWER LINE

- Left hand side: display of all incoming messages (from internal units or from external lines), followed by respective number.

- Right hand side: display of a series of "icons" able to show in a graphic way a wide series of states/functions.

"ICON" DESCRIPTION

+ (box with an arrow, followed by a number): It shows that there are calls (or other commands) in the memory (5 =

number of queued calls)

(Telephone handset): It means the handset is lifted.

(Arrow toward the wire at the left hand side): It indicates intromission in the conversation line by the switchboard's operator.

(Key): It means there is a lock release or a function activation in progress.

(Bell in movement): It means there is a call in progress (ring). Is then being replaced by an "A" indicating a "Wait for the

answer" and then by a "C" indicating a "Conversation in progress" (NOTE: with hooked handset).

or (Telephone in movement): It means there is a connection with the telephone line.

(Lock): Indicates "locked keypad" by an external key.

(Int) (Ext): Indicates the switchboard state (Internal or External mode).

Exclusion of sound (by using R+3).

(Lock in movement): Indicates 'locked keypad'.

Moreover, the display switches its operation if there is any particular function.

QUICK GUIDE

- Parameter programming (R+4) + code

- Displaying the date-time-wake up (R+2), (or R+"8->8")

- Entering the code for keypad lock (R+1)

- Activation of accessory functions (KEY)

- Programming the events to store (R+ )

- Programming the events to print (Press again the push-button)

- Setting the time for wake up service 1 (Press again the push-button)

- Setting the time for wake up service 2 (Press again the push-button)

- Setting the time (Press again the push-button)

- Setting the date (Press again the push-button)

- Exclusion - Reactivation of audio sound R + 3

STORED CALLS

- Possibility of storing different types of "events": calls from interphones, activation of: different functions, door lock release,

calls from switchboard. The selection of the type of events to store is managed by interactive menu type display (see "OPE-

RATION OF MENU PROGRAMMING" ).

- Besides the type of message concerning the type of event and the calling number, the time of the event is stored.

- Maximum number of stored messages: 30 with circular queue (i.e. the latest 30 more recent events are stored).

- Storage of events on the watch backed up RAM (by means of a proper capacitor). In case of mains failure there is no loss

of stored data.

- The events may be sent to a printer simultaneously (option with interface type 945B/I).

- In case of events stored in the memory, a special flashing icon is activated (arrow toward the box ) on the display and

also the number of stored messages. As soon as a message is read it gets cancelled and the number decreases .

- A sound simultaneous with the event reception is generated (programmable).

INTERNAL WATCH WITH DATE AND TIME AND 2 WAKE UP SERVICES

It is always possible to display the present date and time. The internal watch is "backed up" (by means of a capacitor) in case

of mains failure (capacitor supply dwell: nearly 4 days). Two wake up services may be also programmed.

AUDIO EVENTS

Different types of sounds are forseen according to different type of events (call from riser, from external lines, wake up service

etc.). The sounds may be also programmed with musical melodies by means of a special software and an interface connec-

ted to a personal computer.

"SOFTWARE" LOCK KEY

The switchboard keypad may be locked by means of the "software key".

SIMPLIFIED MANAGEMENT OF THE "INTERNAL-EXTERNAL" MODE PUSH-BUTTON.

Now the "Internal-External" push-button (I/E) has only the function to switch from the internal to the external mode. In this new

version there is no keypad lock activation. At any time it is possible to recognize the switchboard state: a proper symbol on

the bottom on the right hand side of display (icon zone) indicates the mode ("I" for internal mode and "E" for external mode).

On external mode also the respective "EXTERNAL" mode LED switches on. NOTE: the state is memorized in EEPROM and is

kept stored even during the mains failure.

MANAGING THE PRINTER

- The printer is connected by means a special optional interface, built-up inside the same switchboard.

- Any printer provided with connected parallel circuit board may be installed (not any more a dedicated printer). It is the

internal software to manage the different models.

- A wide range of data may be selected (either on reception either on transmission).

CIRCUIT BOARD RE-PROGRAMMING "IN-CIRCUIT".

The circuit board may be easily programmed "in-circuit" by proper connector (above all useful for special versions).

POSSIBLE CONNECTION TOWARD A PC

By means of a computer equipped with a proper software and interface it is possible to download the data (events in

memory), to manage the configuration parameters, to manage the names in memory (optional), and to set various functions.

Morover, it is possible to modify the musical melodies, the direct event recording, and to make a partial switchboard selfdia-

gnose.

Specyfikacje produktu

Marka:	Vimar
Kategoria:	przełącznik
Model:	ELVOX 945B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vimar ELVOX 945B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje przełącznik Vimar

Vimar 16634 Instrukcja

29 Grudnia 2024

Vimar 19255 Instrukcja

29 Grudnia 2024

Vimar 20468.1 Instrukcja

15 Grudnia 2024

Vimar 20518 Instrukcja

15 Grudnia 2024

Vimar 20469 Instrukcja

15 Grudnia 2024

Vimar 20465.B Instrukcja

15 Grudnia 2024

Vimar 20468.B Instrukcja

15 Grudnia 2024

Vimar 20448.N Instrukcja

15 Grudnia 2024

Vimar 20448.B Instrukcja

15 Grudnia 2024

Vimar 20465 Instrukcja

15 Grudnia 2024

Instrukcje przełącznik

Najnowsze instrukcje dla przełącznik

Powerfix PSSS 2 A1 Instrukcja

14 Stycznia 2025

INOGENI CAM230 Instrukcja

14 Stycznia 2025

Schneider CCT15225 Instrukcja

14 Stycznia 2025

Luxul XMS-5248P Instrukcja

14 Stycznia 2025

Luxul AMS-2624P Instrukcja

14 Stycznia 2025

Luxul XGS-1005 Instrukcja

14 Stycznia 2025

Luxul AGS-1008M Instrukcja

14 Stycznia 2025

Luxul XMS-1208P Instrukcja

14 Stycznia 2025

Luxul XMS-7048P Instrukcja

14 Stycznia 2025

Luxul AMS-2600 Instrukcja

14 Stycznia 2025