Instrukcja obsługi Velleman K8063


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Velleman K8063 (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
2 MODULAR DIGITS WITH SERIAL INTERFACE
K8063
ILLUSTRATED ASSEMBLY MANUAL H8063IP-1
Total solder points: 82
Difficulty level: beginner 1 2 3 4 5 advanced
Multiple units can be linked in an easy
way to c
reate larger r
eadouts for e.g.
Score-ke
epi
ng, timing, cou
nting, ...
2
Features & Specifications
The K8063 is a 7-segment display which can be controlled by a two-wire serial connection, using the RS232 protocol. The
protocol is platform-independent i.e. any computer running any programming language can control the K8063, as long as it
is equipped with a serial port. Up to 255 units can be individually addressed, allowing you to create large display systems for
e.g. scoreboards, clocks, timers, thermometers, games,
Features
Red bright 57mm jumbo 7-segment display
Complete with snap-in enclosure
Multiple units can easily be linked in order to create larger readouts for different purposes e.g. scorekeeping, timing,
counting, ...
Easy platform-independent control via three-wire RS232 interface
Up to 255 separate units can be addressed
Tested with distances of up to 50m between PC and display
Use our optional PCUSB6 for USB connection
Specifications
Power supply: 9 to 12Vdc / 120mA per display
RS232 interface: 2400baud / 8databits / no parity / 1 stop bit
Dimensions: 74 x 58.5 x 32mm
The general manuals containing guidelines for assembly, safety and electromagnetic compatibility can be downloaded
from our Velleman website (support / manuals / HALG).
3
Assembly hints
1. Assembly (Skipping this can lead to troubles ! )
Ok, so we have your attention. These hints will help you to make this project successful. Read them carefully.
1.1 Make sure you have the right tools:
A good quality soldering iron (25-40W) with a small tip.
Wipe it often on a wet sponge or cloth, to keep it clean; then apply solder to the tip, to give it a wet look. This is called ‘thinning’ and will
protect the tip, and enables you to make good connections. When solder rolls off the tip, it needs cleaning.
Thin raisin-core solder. Do not use any flux or grease.
A diagonal cutter to trim excess wires. To avoid injury when cutting excess leads, hold the lead so they
cannot fly towards the eyes.
Needle nose pliers, for bending leads, or to hold components in place.
Small blade and Phillips screwdrivers. A basic range is fine.
For some projects, a basic multi-meter is required, or might be handy
1.2 Assembly Hints :
Make sure the skill level matches your experience, to avoid disappointments.
Follow the instructions carefully. Read and understand the entire step before you perform each operation.
Perform the assembly in the correct order as stated in this manual
Position all parts on the PCB (Printed Circuit Board) as shown on the drawings.
Values on the circuit diagram are subject to changes.
Values in this assembly guide are correct*
Use the check-boxes to mark your progress.
Please read the included information on safety and customer service
* Typographical inaccuracies excluded. Always look for possible last minute manual updates, indicated as ‘NOTEon a separate leaflet.


Specyfikacje produktu

Marka: Velleman
Kategoria: Niesklasyfikowane
Model: K8063

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Velleman K8063, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Velleman

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane