Instrukcja obsługi VDO C08
VDO
Fietscomputer
C08
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla VDO C08 (18 stron) w kategorii Fietscomputer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/18
English page 1-16
Deutsch Seite 17-32
Français page 33-48
Italiano pagine 49-64
Español pagina 65-80
Nederlands pagina 81-96
GB
C 08
D
C 08
F
C 08
I
C 08
E
C 08
NL
C 08
ETRTO WS in mm KMH WS in inch MPH
47-305 16x1,75 1272 50,1
47-406 20x1,75 1590 62,6
34-540 24x1 3/8 1948 76,7
47-507 24x1,75 1907 75,1
23-571 26x1 1973 77,7
40-559 26x1,5 2026 79,8
44-559 26x1,6 2051 80,7
47-559 26x1,75 2070 81,5
50-559 26x1,9 2089 82,2
54-559 26x2,00 2114 83,2
57-559 26x2,125 2133 84,0
37-590 26x1 3/8 2105 82,9
20-571 26x3/4 1954 76,9
32-630 27x1 1/4 2199 86,6
40-622 28x1,5 2224 87,6
47-622 28x1,75 2268 89,3
40-635 28x1 1/2 2265 89,2
37-622 28x1 3/8 2205 86,8
18-622 700x18C 2102 82,8
20-622 700x20C 2114 83,2
23-622 700x23C 2133 84,0
25-622 700x25C 2146 84,5
28-622 700x28C 2149 84,6
32-622 700x32C 2174 85,6
37-622 700x37C 2205 86,8
40-622 700x40C 2224 87,6
ETRTO WS in mm KMH WS in inch MPH
GB
C
08
1
INSTALLATION AND OPERATION MANUAL - VDO CYTEC C 08
Preface
Thank you for buying a VDO CYTEC bicycle computer. The more familiar you get with this model, the more enjoyable your trips are
going to be.
Please read thoroughly all the information provided in this manual. You are getting important and useful hints for operation to make
you fully benefit from all the technical features of your VDO CYTEC bicycle computer.
We wish you enjoyable trips and rides on your bike with VDO CYTEC
CYCLE PARTS GMBH
Mounting the system
1. Mounting the handlebar holder
The handlebar holder fits handlebars of any diameter. Before mounting the system, decide if you will be using your left or right hand
to operate the computer and then mount the handlebar holder on the respective side. Position the handlebar holder, insert the strap
and adjust it by tightening the screw.
Warning: Before tightening the handlebar holder, make sure to adjust the position of the computer head (inclination) when the LCD-
display is best visible for you. Only when you find the best position tighten the screw.
screw
Specyfikacje produktu
Marka: | VDO |
Kategoria: | Fietscomputer |
Model: | C08 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z VDO C08, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Fietscomputer VDO
22 Września 2024
20 Września 2024
20 Września 2024
18 Września 2024
4 Września 2024
Instrukcje Fietscomputer
- Fietscomputer Pioneer
- Fietscomputer Bosch
- Fietscomputer Mio
- Fietscomputer Polar
- Fietscomputer Garmin
- Fietscomputer Sigma
- Fietscomputer Shimano
- Fietscomputer Batavus
- Fietscomputer Cateye
- Fietscomputer Crivit
- Fietscomputer Pyle
- Fietscomputer Bikemate
- Fietscomputer Suunto
- Fietscomputer Bontrager
- Fietscomputer Sunding
- Fietscomputer Bryton
- Fietscomputer IGPSport
- Fietscomputer Lezyne
- Fietscomputer Maxxus
- Fietscomputer Trek
- Fietscomputer Trelock
- Fietscomputer Ventura
- Fietscomputer Asaklitt
- Fietscomputer Pro
- Fietscomputer Union
- Fietscomputer Ascot
- Fietscomputer Ascent
- Fietscomputer BBB
- Fietscomputer Filzer
- Fietscomputer Echowell
- Fietscomputer Magene
- Fietscomputer Cannondale
- Fietscomputer Powertap
- Fietscomputer VETTA
- Fietscomputer CicloSport
- Fietscomputer VDO Dayton
- Fietscomputer Sigma Sport
- Fietscomputer BBB Cycling
- Fietscomputer Osynce
- Fietscomputer Stamm
- Fietscomputer Kogan
- Fietscomputer Bafang
- Fietscomputer Silent Force
- Fietscomputer Cordo
- Fietscomputer Wahoo
Najnowsze instrukcje dla Fietscomputer
23 Września 2024
23 Września 2024
23 Września 2024
22 Września 2024
22 Września 2024
21 Września 2024
21 Września 2024
20 Września 2024
20 Września 2024
19 Września 2024