Instrukcja obsługi VAX Pet Carpet 66000

VAX odkurzacz Pet Carpet 66000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla VAX Pet Carpet 66000 (6 stron) w kategorii odkurzacz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Vaxcare:
AUST: 1300 36 4040
NZ: 0800 800 900
Vaxcare:
AUST: 1300 36 4040
NZ: 0800 800 900
www.vax.com.au
Instruction Manual
MODIFIED AUGUST 2008
Please read carefully before using this cleaner.
Always fully extend the mains cable before use.
Retain for future reference.
Multifunction
Instruction Manual
Model No. V2000 - Sukka - VHN - Pet VAX - Family VAX
VAXCARE Service & Help:
AUSTRALIA 1300 36 4040
NEW ZEALAND 0800 800 900
If you have any queries or concerns about using
your Vax, call VAXCARE.
Please make a note of the part number or model
number of the appliance before calling.
(Aust only: Mon-Fri. 10.00am to 6.00pm. EST)
Calls are charged at the local rate.
An answerphone is available out of these hours.
There are over 300 approved Vax Service Agents in
Australia and New Zealand. For the nearest Service
Agent, please refer to your Vax warranty or call
VAXCARE or visit www.vax.com.au
Technical Specification
Weight: Net 8.0Kg
Size: Height 54cms x 34cms diameter
Motor: 1200 watts max. / 450 watts min
variable power. 2 stage bypass motor
completely insulated and sealed against
water contamination.
Structure: Moulded high-impact resistant ABS
Dust Bags: Supplied with machine.
Clean Water
Reservoir: 4 litres of clean water.
Recovery
Bucket: 8 litre capacity.
Hose: 1.8m long, crush resistant hose with
360 (degree) swivels at each end.
Subject to technical change without notice.
2
1. Important Safety Information
THIS ‘EASY GUIDE’ SHOULD BE READ
COMPLETELY AND REFERRED TO AT
ALL TIMES BEFORE USING YOUR VAX.
This ‘easy guide’ should be retained with your
VAX for future reference.
If your VAX is sold or transferred to a new
owner, this guide should be passed on so
that the new owner can become acquainted
with the machine and this information. The
following information is provided in the interest
of safety.
Please read it before using your VAX.
DO’S
• Use only genuine VAX replacement parts.
• Use of non VAX fluids, filters and accessories
may damage your machine and void your
warranty.
• Ensure the mains cable is fully unwound
and straightened before use.
• If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
• Ensure the mains cable is kept well away
from the revolving brushes (where fitted)
of your VAX, when it is turned on and
running.
• Keep the mains cable away from heat, oil,
sharp edges and rough surfaces and avoid
damage in any other way.
• Exercise extreme care when cleaning stair
carpets. Ensure that your VAX is in a stable
position at either the top or bottom of the
stairs without over-stretching the hose
or cable. When cleaning the stair treads,
always keep a hand firmly on your VAX. You
may prefer to remove the castors.
• Follow the instructions in this user guide
when fitting accessories or tools.
• Remove the plug from the wall socket before
carrying out any maintenance specified in
this guide.
• Change dust bag and filters at regular
intervals.
• Store your VAX in a dry place.
• Have your VAX serviced by an authorised
VAX Service Agent only using genuine VAX
spare parts.
DONT’S
• This appliance is not intended for use
by young or infirm persons unless they
have been adequately supervised by a
responsible person to ensure that they can
use the appliance safely.
Young children should be supervised
to ensure that they do not play with the
appliance.
• Never drag your VAX by the mains cable.
• Never tug at the mains cable to remove the
plug from the wall socket.
• Never allow the complete coiled mains
cable to drop on the floor as this may result
in kinks or knots occurring in the cable,
causing premature failure.
• Don’t let anyone touch the rotating brush
bar (where fitted) unless your VAX is
disconnected from the mains.
• Never use your VAX in the presence of
flammable gases.
• Avoid sucking up hot items, hazardous
liquids or any other material which could
damage your VAX.
• Never leave your VAX running unattended.
• Never use your VAX without a dust bag.
• If your VAX fails to operate, never attempt to
repair it yourself as repairs carried out by an
unauthorised or inexperienced person may
cause injury to you or damage to your VAX
and void your warranty.
• Never alter the specification or modify your
VAX in any way.
EXTENSION CABLE
If using an extension cable always ensure that
the insulation sheath is in good condition and
is not damaged in any way.
Make sure that the plug and socket are fitted
to the extension cable correctly, if in doubt
have it checked by a qualified electrician.
Always use the extension cable in accordance
with the manufacturer’s instructions.
IMPORTANT: When carrying out any
maintenance or cleaning operations on this
product, it is essential that the plug is removed
from the wall socket.
In the interests of product improvement,
the Company reserves the right to
introduce modifications or alterations
without notice.
11
2. The Sock Filter that
encases the HEPA
filter, acts as a pre-
filter and protects it
from the majority of
dust.
To clean the Sock
Filter gently peel it back from the HEPA
(Fig/14.2).
Shake to remove the excess dirt and
hand wash at normal temperature. Do
not machine wash or tumble dry. Do not
replace the sock when it is still damp or
wet.
When replacing the Sock Filter on the
HEPA ensure that the sock is pulled down
completely all round.
The Sock Filter can be cleaned up to
5 times in this way and should then be
replaced.
3. With the sock removed, the HEPA Filter
can be cleaned by gently tapping on a
hard surface. The HEPA Filter should never
be washed or exposed to water.
VAX recommends that the HEPA Filter be
replaced every 12 months to maintain peak
performance.
TIP
The HEPA filter can also be cleaned by taking
the vacuum outside, removing the HEPA and
vacuuming the HEPA only with the dusting
tool. Ensure all filters are replaced before
vacuuming your home.
15. Removing debris from the
Mini TurboTool
(Model: Pet VAX only. Optional with other models.)
1. Switch the
vacuum cleaner
off and disconnect
the power plug
from the electrical
outlet.
Rotate or remove
the locking ring
(Fig/15.1).
2. Lift the top cover
off and remove any
debris (Fig/15.2).
3. To re-assemble,
ensure that the
tabs are engaged.
Pivot the lower
housing closed and
rotate or replace
the locking ring
180º (Fig/15.3).
16. Removing hair from
TurboBrush
(Model: Pet VAX & Family VAX or optional
extra with other models).
Over time hair and lint will build up around the
brushbar. This must be removed to maintain
performance and prevent damage to the
tool.
1. Switch the vacuum cleaner off and
disconnect the power plug from the
electrical outlet.
2. Turn the brushbar
over and using a pair
of scissors run the
bottom blade along the
length of the brushbar
cutting the hair as you
go (Fig/16.1).
USE SCISSORS WITH
THE POINT OF THE
BLADE AWAY FROM
YOUR BODY.
3. Once the hair and lint around the brush bar
has been cut, remove the hair out of the
brushes.
17. Storage
IMPORTANT: Always unplug the vacuum
cleaner from the electrical outlet and rewind
the power cord as directed before storing.
NOTE: Always store the vacuum cleaner
base down.
Replacement
3 Filter Pack
Disposable Paper
Bags Pack (5)
Replacement
Cloth Bag
Moulded Cone
Filter Pack (2)
P/N 90630 P/N 90600 P/N 90620 P/N 20310
HEPA Filter &
SMS Filter Cover
P/N 90500
5. The washing tool is flat on the surface
being washed.
6. The power control is correctly
adjusted within the washing
range. Turn higher than
minimum wash setting for
uneven or higher pile if required
(Fig/12.4).
7. There are no kinks in the solution tube.
Remove kinks by rubbing the tube between
finger & thumb
8. That the recovery bucket is not full, causing
the automatic cut off valve to stop the
suction.
3
2. Parts Checklist
10
12. If You Have
Washing Difficulties
IF YOU HAVE WASHING DIFFICULTIES,
CHECK...
1. The pump washing button is switched on.
2. The tube valve
is properly
connected
(Fig/12.1).
Before using your VAX, please read ‘Important safety information’ on page 2.
All VAX Multifunctions include:
3. The weight on the end
of the solution tube is
at the bottom of the
water reservoir and
not trapped between
the motor and water
reservoir (Fig/12.2).
4. The rocker
switch is
positioned
t o w a r d s
the back
(Fig/12.3).
13. Looking After Your VAX
Items below are available from your Vax
Retailer or from VAX direct.
REGULARLY (when you buy a new pack
of 5 disposable paper bags or 1 new
cloth bag)…
Replace cone filter
Available in a pack
of two. Also available
with a bondini filter and
exhaust filter in a 3 filter
pack.
Clean the
Bondini filter
Available with a cone
filter and exhaust filter in
a 3 filter pack. Wash filter
in warm water. Squeeze
it dry and replace it.
Your VAX will work more
efficiently if the Bondini filter is replaced with a
new one occasionally.
Clean the
exhaust filter
Available with a cone
filter and bondini filter in
a 3 filter pack. Wash filter
in warm water. Squeeze
dry and replace.
Filter housing unit
Motor unit
Water reservoir
Flexible Suction Hose and Hand grip
Stainless Steel Extendible Wand
Dust bags
VAX
Carpet
Cleaning
Fluid
Combination tool
Upholstery
Tool
Dusting
Brush
Crevice tool
Upholstery
washing tool
Recovery bucket
Fibreflow Carpet
Washing Tool
Liquid Delivery Tube
On/off switch
Variable
speed
control
Pump on/off switch
Hyrdo Dry Hard
Floor Wash Head
HEPA
filter
Spill
Pick-up Tool Mini
Turbo Brush
Turbo Brush
Hard Floor Brush
Other Accessories:
14. Looking After Your HEPA
Filter (Model Family VAX and Sukka only.
Optional extra with other models. Contact
VAXCARE for information)
1. Remove the HEPA
Filter by turning
a n t i c l o c k w i s e
(Fig/14.1).

Specyfikacje produktu

Marka: VAX
Kategoria: odkurzacz
Model: Pet Carpet 66000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z VAX Pet Carpet 66000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odkurzacz VAX

VAX

VAX Blade Pet VX66 Instrukcja

9 Października 2024
VAX

VAX Workhorse VX9 Instrukcja

9 Października 2024
VAX

VAX Advance VX96 Instrukcja

9 Października 2024
VAX

VAX Reach Max VX94 Instrukcja

9 Października 2024
VAX

VAX Zen VCZPH1600 Instrukcja

9 Października 2024
VAX

VAX Power Advance VX77 Instrukcja

9 Października 2024
VAX

VAX Power 6 VX71 Instrukcja

9 Października 2024
VAX

VAX White VX8 Instrukcja

9 Października 2024
VAX

VAX Floormate VX34SK Instrukcja

9 Października 2024
VAX

VAX Magnesium VX37 Instrukcja

9 Października 2024

Instrukcje odkurzacz

Najnowsze instrukcje dla odkurzacz

Hoover

Hoover BV71_BV30011 Instrukcja

15 Października 2024
Ulsonix

Ulsonix ASHCLEAN 20B Instrukcja

15 Października 2024
Adler

Adler AD 7064 Instrukcja

15 Października 2024
Ulsonix

Ulsonix ASHCLEAN 20B_18V Instrukcja

15 Października 2024
AEG

AEG AEF150 Instrukcja

14 Października 2024
Severin

Severin S'powers nonstopXL MY 7115 Instrukcja

14 Października 2024
Shark

Shark Pursuit EP724 Instrukcja

14 Października 2024
Grundig

Grundig VCP 9431 PRO Instrukcja

14 Października 2024
DeLonghi

DeLonghi XLF1200NB Instrukcja

13 Października 2024
AEG

AEG ARSB2 Instrukcja

13 Października 2024