Instrukcja obsługi VAX Mach 3 - C91-M3Series

VAX odkurzacz Mach 3 - C91-M3Series

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla VAX Mach 3 - C91-M3Series (1 stron) w kategorii odkurzacz. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

To replace or purchase parts

for your vacuum cleaner,

please visit our website:

vax.co.uk

If your Vacuum Cleaner or

Accessories are Damaged/Faulty

Please Call our Vax Careline on:

IMPORTANT : Always switch off and unplug the vacuum cleaner from the electrical

outlet before removing the Dirt Container.

Safety Information

For Household Use Only

When using the vacuum cleaner, basic safety

precautions should always be observed, including

the following:

1. Only use the vacuum cleaner indoors on dry

surfaces.

2. Turn off the vacuum cleaner controls before

connecting or disconnecting from the mains

supply.

3. Always unplug the vacuum cleaner before

connecting or disconnecting the vacuum hose

and accessories.

4. Children should be supervised to ensure that

they do not play with the appliance.

5. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have

been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

6. Use only as described in this manual.

Use only the manufacturer’s recommended

attachments.

7. Do not use the vacuum cleaner if it has been

dropped, damaged, left outdoors or dropped into

water. Do not use the vacuum cleaner with a

damaged cord or plug. If the supply cord or plug is

damaged, return the vacuum cleaner to a Vax

Authorised Service Agent or suitably qualified

person for examination, repair or adjustment.

8. Do not pull or carry by the cord. Do not use the

cord as a handle, close a door on the cord or pull

the cord around sharp edges or corners. Do not

run the vacuum cleaner over the cord. Keep the

cord away from heated surfaces.

9. Do not handle the plug or vacuum cleaner with

wet hands. Do not use outdoors or on wet

surfaces.

10. Do not put any objects into openings. Do not

use with any openings blocked and do not

restrict air flow. Keep all openings free of dust,

lint, hair or anything that may reduce airflow.

11. Keep hair, loose clothing, fingers and all parts of

the body away from openings and moving parts.

12. Do not pick up hot coals, cigarette butts,

matches or any hot, smoking or burning objects.

13. Do not pick up flammable or combustible materials

(lighter fluid, petrol, kerosene, etc) or use in the

presence of explosive liquids or vapours.

14. Do not vacuum up harmful or toxic material

(chlorine bleach, ammonia, drain cleaner, etc).

15. Do not vacuum up hard or sharp objects such as

glass, nails, screws, coins, etc.

16. Do not use without the filters in place.

17. Take extra care when vacuuming on stairs.

18. Keep vacuuming area well lit.

19. Store the vacuum cleaner indoors in a cool, dry area.

20. Turn off the on/off switch before unplugging

the vacuum cleaner.

21. Use only CE-approved 13 amp extension cords.

Non-approved extension cords may overheat.

Care should be taken to arrange the cord so

that the cord cannot be pulled or tripped over.

WARNING: Always switch off and unplug

the vacuum cleaner from the electrical outlet

before assembling, opening or emptying the dirt

container, or before connecting/disconnecting the

attachments.

CAUTION: The vacuum cleaner is a very

powerful unit. Before plugging the cord into

the electrical outlet, make sure the switch is in the

‘off’ position. Hold the vacuum cleaner firmly when

starting and in use.

IMPORTANT: If the inlet, hose or telescopic

tube is blocked, switch off the vacuum

cleaner and remove the blockage(s) before

re-starting the vacuum cleaner.

IMPORTANT: Washing filters improves

vacuum performance. Make sure all the

filters are completely dry before inserting back into

the vacuum cleaner.

This vacuum cleaner is intended for household use

only and not for commercial or industrial use.

1. Parts Overview

The Unit

1On/Off Button

Insert the plug into the electrical outlet.

Press the on/off switch on the top of

the vacuum cleaner, to switch the

vacuum cleaner on and press the

button again to turn the vacuum

cleaner off.

2Dirt Container

Locked on to the top of the unit.

3Cyclone separator

Located inside of the Dirt container.

4Pre-motor filter cover

Push the handle catch up to gain

access to the filter.

5Dirt container /Carry handle

Use the carry handle located on the top

of the dirt bin to move the vacuum

cleaner from room to room.

6Dirt container release button

Press the release button and the dirt

container can be lifted and removed off

the unit.

7Auto cord rewind

To rewind the power cord, press the

cord rewind button located at the rear

of the vacuum cleaner.

8Floor Tool parking storage

For convenience there is a parking slot

located at the rear of the vacuum

cleaner where the Floor Tool can be

parked for carrying and storage.

9Post Motor filter cover

Slide the latch across to gain access to

the filter.

10 Plug

11 Dirt bin quick release button

Hold the dirt bin container over a bin

and press the release button.

12 Hose inlet

FAQs

Cleaning the Pre-Motor Filter

Cleaning the Post-Motor Filter

8. Cleaning Blockages

Turn the vacuum cleaner off and unplug from the electrical outlet.

HOSE BLOCKAGES: The flexible hose may be disconnected from the vacuum cleaner by pressing the clip

on the connector and pulling away from the machine. Carefully remove any blockages found and

reconnect the hose securely.

ACCESSORY BLOCKAGE: Remove the accessories from the cleaner, carefully remover the

blockage and return to the cleaner.

Clearing Debris from the TurboTool

Removing debris from the TurboBrush

The brushbar will stop rotating if it is blocked during operation

by vacuuming up foreign objects, or if strands of carpet are

wrapped around it. Switch the vacuum cleaner off and

disconnect the power plug from the electrical outlet.

Lay the TurboBrush floor head on a flat surface and turn over

to expose the brushbar. Using a pair of scissors, cut through

any threads or hairs caught by the brushbar that have

wrapped around the guides.

Bagless cylinder

Vax model number:C91-M3 Series

instruction manual

Retain this guide for future reference.

IMPORTANT: Always unplug the vacuum from the electrical outlet and rewind the

power cord as directed before storing.

NOTE: When rewinding the power cord, guide the cord with one hand, This will prevent the

cord from whipping which could cause damage or injury.

NOTE: For convenience there is a parking slot located at the rear of the vacuum cleaner where

the floor tool and hose can be parked for carrying and storage.

CLICK! CLICK! CLICK!

CLICK!

Monday-Friday 8.30am to 6.30pm Saturday-Sunday 9.00am to 5.00pm

Any queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the UK

national rate.

Please make a note of the model number and serial number of your Vax before calling. There

are over 400 approved Vax Service Agents in the UK. For the nearest Vax Service Agent,

please call the Vax Careline or visit vax.co.uk

Technical Specification

Voltage: 220 - 240 ~ 50 Hz

Wattage: 1400W

Capacity: 1.5 litres approx

Filters: Cyclone separator – wipe clean

Pre-motor filter – washable

HEPA Post-motor filter – washable

Cord Length: 6m (approx)

Weight: 5.5 Kg (approx)

What is your vax’s serial number?

Note this down in case you need it in future

(on the base of

your cleaner)

What is your vax’s model number?

Note this down in case you need it in future

(on the base of

your cleaner)

- - -

Motor Thermostat

IMPORTANT: The motor is equipped with a

thermal cut-out. If for any reason, the

vacuum cleaner should over-heat, the thermostat

will automatically turn the unit off. Should this

occur, unplug the vacuum cleaner from the

electrical outlet and turn off the switch. Remove

the dirt container and empty. Clean the filters.

Allow the cleaner to cool for approximately one (1)

hour. To re-start, plug into an electrical outlet and

switch back on.

KEEP YOUR VAX LIKE NEW!

20 Foam Pre-Motor Filter

21 Fibre Pre-Motor Filter

22 Antibacterial Post-Motor Filter

IMPORTANT: The condition of the filters affects the

performance of your vacuum cleaner. Please check

and wash filters periodically (depending on level of

use). For full cleaning instructions see page 4.

18 12 16

13 14

WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner before

performing maintenance/troubleshooting checks.

Is there an accessory missing?

•check the ‘Parts Overview’ page in this

guide to make sure that the part is

definitely included with your unit.

•If it is missing, please call our Vax Careline

to order a replacement:

visit vax.co.uk to order online.

Why won’t the vacuum cleaner pick up?

•The filters may be clogged: Refer to ‘The

Filters: Maintenance’ (Page 4).

•The Dirt Container is full or blocked: Refer

to ‘Dirt Container: Maintenance’ (Page 4).

•The Dirt Container may be incorrectly

installed: Refer to ‘Dirt container:

Maintenance’ (Page 4).

Why is dust escaping from the vacuum?

•The filters may not be installed correctly.

Refer to ‘The Filters: Maintenance’ (Page 5).

•The Dirt container may be incorrectly

installed: Remove the Dirt Container from

the unit by pressing the Dirt Container

Release Button (6) and reattach it to the

unit, ensuring it is locked firmly back into

place.

•The filters may be clogged: Refer to

‘The Filters: Maintenance’ (Page 4).

What do I do if an accessory/the unit

becomes damaged or broken?

•Visit www.vax.co.uk for parts and spares.

•Please call our Vax careline to purchase

new spares or order a replacement:

Why won’t the accessories pick up

properly?

•The accessory may be blocked: Refer to

‘Cleaning Blockages’ (Page 5).

•The accessory may be faulty: call our

Vax Careline to order a replacement:

Why will the vacuum cleaner not run?

•It may not be plugged into the electrical

outlet correctly: Ensure that the plug is

pushed into the electrical outlet securely.

•The electrical outlet may not be working:

Check the fuse or breaker and consult an

electrician.

•The motor Thermostat may have tripped:

Switch off and unplug the vacuum cleaner.

Leave for one hour before switching the

vacuum cleaner back on.

If none of these questions apply to you, or

for further assistance please call our Vax

Careline team on:

Replacement filter kits are available on: www.vax.co.uk

Your Filters:

Parts Overview

The Accessories

13 2-in-1 Tool

a. Dusting Brush: For delicate surfaces.

b. Upholstery Tool: For carpet, upholstery

and stairs etc.

14 Crevice Tool

For crevices, corners and cracks.

15 TurboBrush

Vacuums carpets & grooms pile.

Great for picking up pet hair.

16 Telescopic Tube

The telescopic tube can be lengthened

or shorted by pushing the button in and

sliding the tube apart or together as

required.

17 TurboTool

Great for picking up pet hair, vacuuming

stairs & upholstery.

NOTE: Do not use the TurboTool on

suede and leather surfaces.

18 Hose

Tool caddy on handle for tool storage.

19 Hard Floor Tool

For parquet and laminate flooring.

EEC STATEMENT OF COMPLIANCE

Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the

C91-M3 Series Mach 3 range is manufactured in compliance with the following Directives:

Safety: 2006/95/EC Low Voltage Directive EMC: 2004/108/EC Electromagnetic Compatibility Directive

Waste electrical products should not be disposed of with household waste. Please recycle where facilities

exist. Check with your Local Authority or retailer for recycling advice.

Subject to technical

change without notice

11 9

17 19

13a

13b

NOTE: Fully unwind the

power cord. A yellow mark

on the power cord

indicates the

recommended cord length.

Do not exceed the cord

length beyond the red

mark.

IMPORTANT: Remove the Dirt Container

from the unit and dispose of the dirt

inside the container before cleaning.

IMPORTANT : The cyclone separator should

not be submerged in water.

6. Dirt Container: Maintenance

Emptying the Dirt Container

Cleaning the Cyclone Separator

7. The Filters: Maintenance

IMPORTANT : Do NOT use the vacuum

without ALL of the filters in place.

Vax recommends that the pre- and post-

motor filter should be checked and cleaned

periodically depending on the frequency of

use and the volume of dirt being picked up

on each occasion.

NOTE : Both Pre- and Post-Motor Filters can

be rinsed in warm water (max 40°C). Allow to

air dry for 24 hours before replacing. Do NOT

use any detergents or boiling water to wash

filter.

IMPORTANT: Your vax vacuum cleaner is fitted with high performance filters it is essential

that these are well maintained and cleaned according to the following instructions.

2220 21

2. Assembling the vacuum cleaner

3. Choose the attachments for the job:

4. Operating the appliance

5. Packing away and storage

WARNING: Always

switch off and

unplug the vacuum

cleaner from the electrical

outlet before assembling,

opening or emptying the dirt

container, or before

connecting/ disconnecting

the attachments.

Once completely dry, return the pre-motor filters and case to the vacuum cleaner.

Replace the pre-motor filter cover before restarting the vacuum cleaner.

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

vax.co.uk (UK) 0844 412 8455 (ROI) 1-800 928 308

0844 412 8455 0844 412 8455

0844 412 8455

Vax Careline: (UK) 0844 412 8455

(ROI) 1-800 928 308

C-91-M3-G-A User Guide:Fold Out 17/4/09 15:36 Page 1

Specyfikacje produktu

Marka:	VAX
Kategoria:	odkurzacz
Model:	Mach 3 - C91-M3Series

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z VAX Mach 3 - C91-M3Series, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje odkurzacz VAX

VAX Blade Pet VX66 Instrukcja

9 Października 2024

VAX Workhorse VX9 Instrukcja

9 Października 2024

VAX Advance VX96 Instrukcja

9 Października 2024

VAX Reach Max VX94 Instrukcja

9 Października 2024

VAX Zen VCZPH1600 Instrukcja

9 Października 2024

VAX Power Advance VX77 Instrukcja

9 Października 2024

VAX Power 6 VX71 Instrukcja

9 Października 2024

VAX White VX8 Instrukcja

9 Października 2024

VAX Floormate VX34SK Instrukcja

9 Października 2024

VAX Magnesium VX37 Instrukcja

9 Października 2024

Instrukcje odkurzacz

Najnowsze instrukcje dla odkurzacz

Hoover BV71_BV30011 Instrukcja

15 Października 2024

Ulsonix ASHCLEAN 20B Instrukcja

15 Października 2024

Adler AD 7064 Instrukcja

15 Października 2024

Ulsonix ASHCLEAN 20B_18V Instrukcja

15 Października 2024

AEG AEF150 Instrukcja

14 Października 2024

Severin S'powers nonstopXL MY 7115 Instrukcja

14 Października 2024

Shark Pursuit EP724 Instrukcja

14 Października 2024

Grundig VCP 9431 PRO Instrukcja

14 Października 2024

DeLonghi XLF1200NB Instrukcja

13 Października 2024

AEG ARSB2 Instrukcja

13 Października 2024