Instrukcja obsługi V-TAC VT-OHS30K-100

V-TAC Ładowarka baterii VT-OHS30K-100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla V-TAC VT-OHS30K-100 (18 stron) w kategorii Ładowarka baterii. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/18
__________________________ USER MANUAL
1
Content
1. Introduction ...................................................................................................................................... 2
1.1 Important Safety Instructions .................................................................................................2
1.2 Brief Introduction ................................................................................................................... 3
1.3 Product Properties ..................................................................................................................3
2. Product Specification ........................................................................................................................4
2.1 Size and Weight ...................................................................................................................... 4
2.2 Performance Parameter ......................................................................................................... 5
2.3 Equipment Interface Instruction ............................................................................................ 6
2.4 Battery Management System(BMS) .......................................................................................8
2.4.1 BMS Protection and Alarm ..........................................................................................8
3. Installation and Configuration ........................................................................................................10
3.1 Preparation for installation .................................................................................................. 10
3.1.1 Safety Requirement ...................................................................................................10
3.1.2 Environmental requirements .................................................................................... 10
3.1.3 Tools and data ............................................................................................................11
3.1.4 Technical preparation ............................................................................................... 11
3.1.5 Unpacking inspection ................................................................................................ 11
3.2 Equipment installation ......................................................................................................... 13
3.2.1 Installation Steps ....................................................................................................... 13
3.2.2 Battery parameter settings on the inverter .............................................................. 15
4. Installation and Configuration ........................................................................................................15
4.1 Battery system usage and operation instructions ............................................................... 15
4.2 Alarm description and processing ........................................................................................16
4.3 Analysis and treatment of common faults ...........................................................................16
__________________________ USER MANUAL
2
1. Introduction
1.1 Important Safety Instructions
Danger!
Please do not put the battery into water or fire, in case of explosion or any other
situation that might endanger your life.
Please connect wires properly while installation, do not reverse connect.
To avoid short circuit, please do not connect positive and negative poles with
conductor on the same device.
Please avoid any form of damage to battery, especially stab, hit, trample or strike.
Danger!
Please shut off the power completely when removing the device or reconnecting wires
during the daily use or it could cause the danger of electric shock.
Please use dry powder extinguisher to put out the flame when encountering a fire
hazard, liquid extinguisher could result in the risk of explosion.
For your safety, please do not arbitrarily dismantle any component in any
circumstances. The maintenance must be implemented by authorized technical
personnel or our company’s technical support. Device breakdown due to unauthorized
operation will not be covered under warranty.
Caution!
Our product have been strictly inspected before shipment. Please contact us if yous
find any abnormal phenomena such as device outer case bulging.
The product shall be grounded properly before use in order to ensure your safety.
To assure the proper use please make sure parameters among the relevant device are
compatible and matched.
Please do not mixed-use batteries from different manufacturers, different types and
models, as well as old and new together.
Caution!
Ambient and storage method could impact the product life span, please comply with
the operation environment instruction to ensure device works in proper condition.
For long-term storage, the battery should be recharged once every 6 months, and the
amount of electric charge shall exceed 80% of the rated capacity.
Please charge the battery in 18 hours after it fully discharged or over-discharging
protection mode is activated.
Formula of theoretical standby time: T=C/I (T is standby time, C is battery capacity, I is
total current of all loads).
__________________________ USER MANUAL
3
1.2 Brief Introduction
51.2V100AH lithium iron phosphate battery system is a standard battery system unit, customers can
choose a certain number of 51.2V100AH according to their needs, by connecting series to form a larger
capacity battery pack, to meet the user's long-term power supply needs. The product is especially
suitable for energy storage applications with high operating temperatures, limited installation space,
long power backup time and long service life.
1.3 Product Properties
51.2V100AH energy storage product’s positive electrode materials are lithium iron phosphate,
battery cells are managed effectively by BMS with better performance, the system’s features
as below:
The whole module is non-toxic, non-polluting and environmentally friendly;
Cathode material is made from LiFePO4 with safety performance and long cycle life
Battery management system with better performance, possesses protection
function like over-discharge, over-charge, over-current, abnormal temperature.
Self-management on charging and discharging, Single core balancing function.
Intelligent design configures integrated inspection module.
Flexible configuration, multiple battery modules can be in parallel for expanding capacity
and power.
Flexible configurations allow parallel of multi battery for longer standby time.
Self-ventilation with lower system noise.
Less battery self-discharge, then recharging period can be up to 10 months during the
storage.
No memory effect so that battery can be charged and discharged shallowly.
With wide range of temperature for working environment, -10 ~ +55 , circulation℃ ℃
span and discharging performance are well under high temperature.
__________________________ USER MANUAL
4
2. Product Specification
2.1 Size and Weight
Table 2-1 Device size
Product
Nominal Voltage
V
Nominal Capacity
Ah
Weight
Kg
OHS15K-100
153.6
100
161.4
OHS20K-100
204.8
100
207.0
OHS25K-100
256
100
252.6
OHS30K-100
307.2
100
298.2
OHS35K-100
358.4
100
343.8
OHS40K-100
409.6
100
389.4
__________________________ USER MANUAL
5
2.2 Performance Parameter
Table 2-2 performance parameter
Technical specification
15KWH
20KWH
25KWH
30KWH
35KWH
40KWH
Installation Mode
Stackable
Battery Type
LifePO4(LFP)
Module Energy(kWh)
5.12
Module Nominal Voltage(V)
51.2
Module Capacity(Ah)
100
System Model
OHS15K-100
OHS20K-100
OHS25K-100
OHS30K-100
OHS35K-100
OHS40K-100
Battery Module Qty
InSeries(Optional)
3
4
5
6
7
8
System Nominal Voltage(V)
153.6
204.8
256.0
307.2
358.4
409.6
System Nominal
Capacity(KWh)
15.36
20.48
25.60
30.72
35.84
40.96
Usable Capacity(KWh)
12.29
16.38
20.48
24.58
28.67
32.77
Dimension (mm)
590*420*698
590*420*849
590*420*1000
590*420*1151
590*420*1302
590*420*1453
Weight (Kg)
161.4
207.0
252.6
298.2
343.8
389.4
Recommend
Charge/Discharge Current (A)
40
Communicaiton
CAN
Ingress Protection
IP65
Altitude
≤2000m
Cycle Life
25±2°C,0.5C/0.5C,EOL70%≥6000
Monitoring Parameters
System voltage,Current,cell voltage,cell temperature,module temperature
SOC
Intelligent algorithm
Working Temperature
0℃~45℃ Charge -10℃ ~55℃ Disharge
Storage Temperature
0~35


Specyfikacje produktu

Marka: V-TAC
Kategoria: Ładowarka baterii
Model: VT-OHS30K-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z V-TAC VT-OHS30K-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Ładowarka baterii V-TAC

Instrukcje Ładowarka baterii

Najnowsze instrukcje dla Ładowarka baterii