Instrukcja obsługi Uniden EXP 2800
Uniden
Telefony bezprzewodowe
EXP 2800
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Uniden EXP 2800 (12 stron) w kategorii Telefony bezprzewodowe. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
1
Introduction
Controls and Functions
1. Handset earpiece
2. talk/batt LED - indicates when phone is in
use or the battery is low
3. talk - answers or places calls
4. */tone - switches to tone dialing in pulse
dial mode
5. redial - redials the last number
6. pause - adds a timed pause in a memory
dialing sequence
7. One-Touch Priority Keys
8. Handset Microphone
9. m - enters or recalls numbers in memory
10. flash - accesses call waiting (if available)
11. volume - sets both the ringer and earpiece
volumes
12. chan - selects another channel for clearer
reception
13. Battery Charging Contacts
14. Handset Retainer- holds handset in base for
wall mounting.
15. Status LED
16. page/find - locates the handset
The Uniden EXP2800 900 MHz cordless phones are designed and engineered to exacting standards for
reliability, long life, and outstanding performance.
▼ Features
• 900 MHz Extended Range Technology • Page/Find
• 10-Number Memory Dialing • AutoTalk™
• 40 Channel Autoscan • AutoStandby™
• Tone/Pulse Dialing • 7 Hours Talk Time
• Handset Volume Control • 14 days Standby Time
• 32 Digit Redial • Hearing Aid Compatible
The EXP2800 features include AutoTalk AutoStandbyand . AutoTalk allows you to answer a call by
just removing the handset from the base so you don’t have to waste time pushing buttons or flipping
switches. AutoStandby allows you to hang up by simply returning the handset to the base.
The UltraClear Plus™ true compander circuitry virtually eliminates background noise. This innovative
technology provides you with the best possible reception during all your conversations.
To protect you against misbilled calls which might result from your phone being activated by other
equipment, the EXP2800 has digital security which automatically selects one ofRandom Code™
approx. 65,000 digital security codes for the handset and base. Also, the AutoSecure™ feature
electronically locks your phone when the handset is in the base.
Be sure to visit our web site: www.uniden.com
Uniden®is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of
Uniden America Corporation.
4) Place the handset on the base.
NOTE: Use only the Uniden Battery (BT-905) supplied with your phone. Replacement batteries are also
available through the Uniden Parts Department.
Battery use time (per charge)
From fully charged
• Seven hours continuous use
• Fourteen days when the handset is in the standby mode
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate
functions in order to save power. If the phone is not in use, the LED flashes when the batterytalk/batt
pack is low.
If the phone is in use, the LED flashes and the handset beeps. Complete your conversation astalk/batt
quickly as possible and return the handset to the base for charging.
NOTE: The last number dialed in the redial memory and the numbers stored in the memory locations
are retained for up to 1 minute while you replace the battery pack.
Cleaning the Battery Charging Contacts
To maintain a good charge, it is important to clean the battery
contacts on the handset and base unit with a dry cloth or a pencil
eraser about once a month.
Do not use any liquids or solvents.
NOTES:•Even when the battery pack is not being used, it will gradually discharge over a long period
of time. For optimum performance, be sure to return the handset to the base unit after each
telephone call.
• If you must replace the battery pack during a telephone call, complete the replacement within
30 seconds, and you can return to the original call.
C. Connect the base unit
1) Connect the AC adapter to the jack and aDC IN 9V
standard 120V AC wall outlet.
2) Set the base unit on a desk or tabletop, and place the
handset on the base unit as shown.
3) Then raise the antenna to a vertical position.
4) Make sure the LED lights. If the LED does not light,status
check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
NOTICE: Place the power cord so it does not create a trip hazard or where it
could become chafed and create a fire or electrical hazard.
NOTES:•Use only the supplied AD-310 AC adapter. Do not use any other
AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
• The handset can be placed face up or face down in the base for charging.
2
Specyfikacje produktu
| Marka: | Uniden |
| Kategoria: | Telefony bezprzewodowe |
| Model: | EXP 2800 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Uniden EXP 2800, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Telefony bezprzewodowe Uniden
14 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
Instrukcje Telefony bezprzewodowe
- Telefony bezprzewodowe Philips
- Telefony bezprzewodowe Panasonic
- Telefony bezprzewodowe Medion
- Telefony bezprzewodowe Audioline
- Telefony bezprzewodowe Profoon
- Telefony bezprzewodowe Alcatel
- Telefony bezprzewodowe Bang & Olufsen
- Telefony bezprzewodowe Telefunken
- Telefony bezprzewodowe Topcom
- Telefony bezprzewodowe KPN
- Telefony bezprzewodowe Swissvoice
- Telefony bezprzewodowe Proximus
- Telefony bezprzewodowe Steren
- Telefony bezprzewodowe Belgacom
- Telefony bezprzewodowe Switel
Najnowsze instrukcje dla Telefony bezprzewodowe
15 Października 2024
14 Października 2024
14 Października 2024
11 Października 2024
11 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024