Instrukcja obsługi Tripp Lite SmartOnline SV20KS1P1B

Tripp Lite UPS SmartOnline SV20KS1P1B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite SmartOnline SV20KS1P1B (108 stron) w kategorii UPS. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/108
1
Owner’s Manual
SmartOnline® 208V SV-Series
3-Phase Modular UPS Systems
(Series Number: AG-0172) (Series Number: AG-0173) (Series Number: AG-0174)
Input: 120/127V (Ph-N), 208/220V (Ph-Ph)
(Not suitable for mobile applications)
Español 37 • Français 73
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
2
Table Of Contents
1. Introduction 3
2. IMPORTANT SAFETY WARNINGS 4
2.1 Location Warning 4
2.2 EMC 4
2.3 Connection Warning 4
2.4 Battery Warning 5
2.5 Safety Standards 5
3. UPS Layout 6
3.1 SmartOnline SV-Series Layout 6
3.2 Package Contents 8
4. Positioning and Pre-Installation 9
4.1 Important Safety Warning 9
4.2 Transportation 9
4.3 Delivery 9
4.4 Installation Environment 9
4.5 Unpacking the UPS 10
5. Wiring and Block Diagrams 11
5.1 Block Diagram 11
5.2 Function of Core System Elements 11
6. Operating Overview 12
6.1 Operating Modes 12
6.2 Single or Dual Feed Input 12
7. Installation 13
7.1 Breakers and Wiring Terminal Block 13
7.2 STS Module Installation 13
7.2.1 Installing a Power Module 15
7.2.2 Removing a Power Module 16
7.2.3 Installing a Battery Module 16
7.2.4 Removing a Battery Module 16
7.2.5 External Battery Cabinet Connection 17
7.3 Cold Start 17
8. Manual Maintenance Bypass 18
8.1 Transfer to Bypass via STS Module Connector 18
from UPS Mode
8.2 Transfer to Bypass via Control Panel 18
9. Control Panel 19
9.1 Introduction 19
9.2 Audible Alarms 20
9.3 Screen Descriptions 20
9.3.1 Start-Up Screen 20
9.3.2 Home Screen 20
9.3.3 Menu Screen 20
9.3.4 Control Screen 21
9.3.5 Measurement Screen 22
9.3.6 Setup Screen 23
9.3.6.1 General 23
9.3.6.2 System 24
9.3.6.3 Battery 25
9.3.6.4 Pre-Alarm 26
9.3.7 Information Screen 26
9.3.8 Events Screen 27
9.3.8.1 Current Events 27
9.3.8.2 Historical Events 28
9.3.8.3 Reset All Events 28
9.4 Text Summaries and Explanations 28
10. Communication 30
10.1 STS Module 30
10.2 Dry Contact Ports 30
10.2.1 Remote EPO Input Port 30
10.2.2 Maintenance Bypass Switch Port 31
10.3 Connectivity 31
10.3.1 SNMP 31
10.3.2 Serial Port 31
10.3.3 USB Port 31
11. Maintenance 32
11.1 Power Module Replacement 32
11.2 Battery Module Replacement 32
11.3 Installing/Replacing the Air Filters 32
12. Troubleshooting 33
13. Technical Specifications 34
14. UPS and Battery Storage; Battery Disposal 36
14.1 UPS and Battery Storage 36
14.2 Battery Disposal 36
15. Warranty and Product Registration 36
3
1. Introduction
Tripp Lite’s SmartOnline SV-Series Uninterruptible Power Supply (UPS) is a Voltage and Frequency Independent (VFI) true on-line, double
conversion 3-Phase UPS system. This UPS continuously conditions the incoming electrical power supply, eliminating poweructuations and
interruptions that can otherwise damage sensitive electronic devices and create system downtime. Ranging from 20kVA/18kW to 140kVA/126kW,
this series of UPS systems is designed to the highest quality and performance standards and offers the following features:
True on-line UPS: highest level of UPS protection, fully regulating the incoming power supply and transferring immediately to battery in the
event of an extended mains failure for continuous support of critical loads
Modular system: three frame arrangements with multiple construction possibilities to suit specic application requirements; easy and fast
maintenance with hot-swappable power and battery modules
N+1 redundancy up to 140kVA
High efficiency – lower heat losses reduce cooling costs and extend system lifespan
0.9 output power factor – more actual power allows more equipment to be supported
Automatic and manual bypass increase system reliability and allow for maintenance without removing power from the attached load
Wide input voltage window – the UPS system regulates even poor-quality incoming power without reverting to battery, maximizing system
uptime and protecting battery life
Compact form factor; space-saving design even up to 140kVA in a standard rack footprint
Serial communication as standard; SNMP and volt free contact options for optimum configurability
Dual input design allows standard installation from one or two power sources
Low input current total harmonic distortion; no need to oversize a generator set
The SmartOnline SV UPS is designed for protecting critical electrical equipment for:
Data centers
Telecommunications
Networks (LAN/WAN)
Corporate infrastructure
Healthcare
Security
Light industrial
Financial institutions


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: UPS
Model: SmartOnline SV20KS1P1B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite SmartOnline SV20KS1P1B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje UPS Tripp Lite

Instrukcje UPS

Najnowsze instrukcje dla UPS

APC

APC Back-UPS BN575G Instrukcja

12 Października 2024
APC

APC Smart-UPS SMC1000-2UC Instrukcja

12 Października 2024
APC

APC Back-UPS BX550CI-AR Instrukcja

12 Października 2024
APC

APC Back-UPS BN600G Instrukcja

12 Października 2024
APC

APC Back-UPS BX650CI-GR Instrukcja

12 Października 2024
APC

APC Back-UPS BX950U-FR Instrukcja

12 Października 2024
APC

APC Back-UPS BX650LI Instrukcja

12 Października 2024
APC

APC Easy UPS BVX1000UXI Instrukcja

12 Października 2024
Eaton

Eaton EX 3000VA 3U XL Instrukcja

11 Października 2024