Instrukcja obsługi Tripp Lite PSCLAMP2


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PSCLAMP2 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Owner’s Manual
Mounting Clamp
for Medical-Grade Power Strips
Model: PSCLAMP2
Table of Contents
1. Important Safety Instructions 2
2. Parts and Features 2
3. Installation 3
4. Lifetime Limited Warranty 4
Français 5
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved.
2
1. Important Safety Instructions
2. Parts and Features
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation of the product described in this
manual. Read instructions before attempting to install this product. Failure to comply may invalidate any warranty and ALL
cause serious property damage and/or personal injury.
The PSCLAMP2 mounting kit includes:
• 2 Mounting Brackets
• 2 Retainer Brackets
• 4 Screws
• (2) M6 12 mm Phillips Head Screws
• (4) M5 30 mm Phillips Head Screws
The PSCLAMP2 is designed to be used with Tripp Lite’s
Medical-Grade Power Strips. To accommodate a wide variety
of applications, the clamps fit tubes 7/8” – 1¼”.
Mounting Brackets Retainer Brackets
M6 12 mm Screws M5 30 mm Screws
3
3. Installation
Before beginning installation, verify that all necessary package contents are present and that the power strip to be mounted
conforms to the standards necessitated by its mounting location.
1 Secure mounting brackets A loosely to each end of the
power strip B using the two M6 screws provided.
2 Mount the power strip to the mobile cart, IV tube or
other application by using the retainer brackets and four
M5 screws provided. Tighten the mounting brackets
securely in place.
3 Tighten the M6 screws used to attach the power strip to
the mounting brackets.
1
2
B
A


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Niesklasyfikowane
Model: PSCLAMP2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PSCLAMP2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Tripp Lite

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane