Instrukcja obsługi Tripp Lite PS410HGUK


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PS410HGUK (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
1
Owner’s Manual
Hospital-Grade
Power Strips
Models: PS410HGUK, PS610HGUK
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
17-04-347-9336F0-EN.indd 1 6/15/2017 10:53:23 AM
2
IMPORTANT SAFETY INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
WARNING!
Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life
support equipment or to significantly affect its safety or effectiveness
is not recommended. Do not use this equipment within oxygen-enriched
atmospheres, or within 0.3 m of a point at which an oxygen-enriched
atmosphere is intentionally vented.
CAUTION!
Use only with outlets that are grounded. DO NOT connect to an ungrounded
outlet. DO NOT use with extension cords or adapters that eliminate the
connection to ground.
The power strip is designed for indoor use only, in a controlled
environment. Install the power strip away from heat-emitting appliances
such as radiators or heat registers. DO NOT install where excessive
moisture or other conductive contaminants are present.
Never install electrical wiring during a lightning storm.
The power strip provides the convenience of multiple outlets, but DOES
NOT provide surge or line noise protection for connected equipment.
Do not attempt to modify the power strip, input plugs or power cables.
Do not drill into or attempt to open any part of the power strip housing.
There are no user-serviceable parts inside.
Installation
1 Connect Your Power Strip to Your AC Power Line
Plug the power cord into a standard BS 1363 utility outlet. For best performance
of the connected equipment, it is recommended the power strip be connected to a
standard 13A socket that has an isolated earth to eliminate unwanted ground noise.
2 Connect AC Equipment to Your Power Strip
Plug the AC power cords of your equipment into your power strip. Do not use extension
cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your
power strip. If the current draw of the equipment connected to your power strip
exceeds your model’s Maximum Load Rating (13A), the fuse located inside the input
plug will blow to prevent any possible damage. When the fuse blows, it will need to
be replaced. Before replacing the fuse, remove excess equipment to prevent another
overload. For fuse replacement instruction, see Power Strip Care and Maintenance.
3 Equipotential Grounding Wire
The power strip is provided with an equipotential ground stud and wire for connecting
equipment. The use of equipotential grounding is recommended to reduce unwanted
leakage currents between equipment.
17-04-347-9336F0-EN.indd 2 6/15/2017 10:53:23 AM
3
Power Strip Care and Maintenance
Warning: Do not spray with liquid cleaning products.
To clean, unplug unit and wipe with a clean cloth. Cloth may be dampened with
all-purpose cleaner.
Check status and operation of the Mains ON indicator light, if applicable.
Ensure mechanical integrity of case.
Ensure mechanical integrity of power cord. It should be free of cuts, frays, and
exposed wires/conductors.
Ensure mechanical integrity of built-in outlet safety covers, if applicable.
Tripp Lite recommends annual inspection of its products when they are used in a
hospital/medical/healthcare/assisted living environment.
Check the input plug fuse. Normal operation requires the fuse to be undamaged. If
the fuse is damaged, replace fuse with a British Plug Top Fuse BS 1362 (13A).
13A
FUSE
17-04-347-9336F0-EN.indd 3 6/15/2017 10:53:23 AM


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Niesklasyfikowane
Model: PS410HGUK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PS410HGUK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Tripp Lite

Tripp Lite

Tripp Lite B127A-1A1-BDBH Instrukcja

12 Października 2024
Tripp Lite

Tripp Lite BP36V15-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite RBC92-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite SRCOMBO Instrukcja

8 Października 2024
Tripp Lite

Tripp Lite T014-001 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite RBC7A Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite N250-P12 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite PS410HGUK Instrukcja

6 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024