Instrukcja obsługi Tripp Lite PDUMV20HV


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tripp Lite PDUMV20HV (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
1
Basic, Metered and Metered with
Isobar® Surge Protection Vertical
Rack PDUs
Models:
PDUMV30, PDUMV30HV, PDUV30HV, PDUV30-36,
PDUMV30-ISO, PDUMV20HV, PDUMV20HVL6,
PDUMV20HV-36, PDUV20HVL6-72
(Series Numbers: AGIB6672, AGPD6673, AGPD6674)
Important Safety Instructions 2
Important Warnings 2
Installation 4
Features 4
Warranty & Product Registration 6
Español 7
Français 13
Русский 19
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2022 Tripp Lite. All rights reserved.
Owners Manual
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
®
surge protector in our monthly drawing!
tripplite.com/warranty
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be
followed during the installation, operation and storage of this
product. Failure to heed these instructions and warnings will
void the product warranty.
CAUTION Only those who are properly trained or qualified to use this device
should do so. Anyone who is not trained or qualified should not use this device
unless it is under the supervision of someone who is properly trained or qualified
to do so. Children must be supervised to ensure that they do not use the device
as a toy.
Do not install this device if there is not at least 10 meters (30 feet) or more of wire
between the electrical outlet and the electrical service panel.
Never use the device if the cord and plug are damaged; if it is not working
properly, or if it has been dropped or damaged, take it to an authorized service
center for inspection and repair.
If the power cord is damaged, it must be replaced by the manufacturer, its
authorized service agent, or by qualified personnel in order to avoid a danger.
The PDUMV30-ISO PDU model provides surge and line noise protection to connected
equipment through its outlets.
Non-ISO PDUs do not provide surge and line protection to connected equipment.
The PDU is designed for indoor use only in a controlled environment away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
The PDU must be installed by a qualified technician only.
Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
Connect the PDU to an outlet that is in accordance with your local building codes and
adequately protected against excess currents, short circuits, and earth faults.
Keep indoor ambient temperatures between 32°F and 77°F (0°C and 25°C).
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to
significantly affect its safety or effectiveness is not recommended. Do not use this
equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous
oxide.
Do not connect the PDU to an ungrounded outlet or extension cords or adapters that
eliminate the connection to ground.
The power requirement for each piece of equipment connected to the PDU must not
exceed the individual outlet’s load rating.
The plug on the power supply cord serves as the disconnect device.
Important Safety Instructions
Important Warnings
3
Important Warnings
The electrical outlets that supply power to the equipment should be near the equipment
and easily accessible.
The total power requirement for equipment connected to the PDU must not exceed the
maximum load rating for the PDU.
Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
Do not attempt to modify the PDU, including the input plugs and power cables.
Do not attempt to use the PDU if any part of it becomes damaged.
Do not attempt to mount the PDU to an insecure or unstable surface.
Never attempt to install electrical equipment during a thunderstorm.
Install in accordance with National Electrical Codes. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug rating/equipment
rating as follows:
Model Series Number Overcurrent Protection
PDUV30HV AGIB6672 30A
PDUV20HVL6-72 AGIB6672 20A
PDUMV30, PDUMV30-ISO AGPD6673 30A
PDUMV16HV, PDUMV20HV,
PDUMV20HVL6, PDUMV20HV-36
AGPD6674 20A
PDUMV30HV AGPD6675 30A


Specyfikacje produktu

Marka: Tripp Lite
Kategoria: Niesklasyfikowane
Model: PDUMV20HV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tripp Lite PDUMV20HV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Tripp Lite

Tripp Lite

Tripp Lite B127A-1A1-BDBH Instrukcja

12 Października 2024
Tripp Lite

Tripp Lite BP36V15-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite RBC92-2U Instrukcja

9 Października 2024
Tripp Lite

Tripp Lite SRCOMBO Instrukcja

8 Października 2024
Tripp Lite

Tripp Lite T014-001 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite RBC7A Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite N250-P12 Instrukcja

7 Października 2024
Tripp Lite

Tripp Lite PS410HGUK Instrukcja

6 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024